Tuning A 80mm Turbo LS Foxbody Mustang on 93 octane \\ Holley Terminator X \\ SBE Gen 3

Рет қаралды 20,646

3 жыл бұрын

Tuning A 80mm Turbo LS Foxbody Mustang on 93 octane \\ Holley Terminator X \\ SBE Gen 3
Long time friend and customers car. im jelous with how much fun he is going to have with this car. i tried to trade him another car for this one but he turned me down!
Want to Learn How To TUNE Holley Efi, Terminator X, and Sniper?
www.tunethetrilogy.com/ ---- Cick Here!
tune the trilogy instagram - literally zero followers its so new: / tune_the_trilogy
My Main Website: www.tempest-racing.com/
My Instagram: / joe_at_tempest
My Parts Manufacturing Website: www.sequencemanufacturing.com/
Sequence Instagram: / sq_mfg

Пікірлер: 83

@SloppyMechanics 3 жыл бұрын

Stand on errrrrr

@D3thM3tal 3 жыл бұрын

Love the content, the memes and the subtle ... "changes" to the software :D Learning a lot, we appreciate you!

@finnroen2334 3 жыл бұрын

I enjoy your videos. Always fun and honest. Thanks for posting.

@voiicekillaz 3 жыл бұрын

Your videos have helped a lot with getting our Turbo Ls powered GS300 moving. No where near close to being where we need to be. Im struggling with timing and understanding it. You make all this look so easy!

@justinw6448 3 жыл бұрын

When he put the helmet on for that last run 😂

@jar895 3 жыл бұрын

Never mind . I'm catching on now that I saw the next log. Added a new level of entertainment. Thanks.

@ricardolopez3535 3 жыл бұрын

Thank you for the content! That c10 is sick!!!

@colemanfoster7089 3 жыл бұрын

Wish I had the time and money to bring my car all the way to you. You are top notch af. Appreciate the killer conent

@michaeldeshotel786 3 жыл бұрын

Great to see another video sir

@illnock1 3 жыл бұрын

Even when you struggle you make it look easy

@timweb1510 3 жыл бұрын

Send that man more shirts holley

@DCWERX 3 жыл бұрын

Excellent content as always Joe

@davidw.thatmsdguy8952 3 жыл бұрын

Hell yeah! Love the content!

@jesscneal 3 жыл бұрын

Great vid Joe 👍👍

@1off1935 3 жыл бұрын

Love your vids Joe! If you don't mind, what did you do to get rid of that lean spike on ramp in. I keep getting a lean spike at about 2 to 3% TPS. It's a sniper with a turbo.Thanks

@chanzsafari 3 жыл бұрын

Love the patience level scale lol

@JLws6CA 3 жыл бұрын

Love your content!

@mannyr.2756 3 жыл бұрын

I like what you do man keep it up.👍

@JoeSimpsonAtTempest 3 жыл бұрын

Thanks! Just try to have some fun with it haha

@joeyg424 3 жыл бұрын

Not bad for a car put together in 3 months!

@JBAutomotive794 3 жыл бұрын

the beers and patience are definitely something we need to keep an eye on... 💯🍻🇺🇲 I'll ride by later on my loud ass dirt bike with some beers.

@JoeSimpsonAtTempest 3 жыл бұрын

😂😂

@fastrucken1555 3 жыл бұрын

Love videos!!!! keep them comming

@JoeSimpsonAtTempest 3 жыл бұрын

Thanks will do!

@rdub79lx 3 жыл бұрын

That C10 is 🔥🔥🔥🔥

@kevin_nagle 2 жыл бұрын

@15:08 # of beers I had / Patience Level 🤣 love it

@dakotadale567 3 жыл бұрын

Killer as always.

@pistonhead1970 3 жыл бұрын

number of beers 3.0 and patience level - 9.2 lol

@brianmathew09 2 жыл бұрын

Fwiw.."Alky control" systems ...been running one for 10 years..i do rebuild the pump (sureflow) every 2 years....zero failures.

@Onalky87 3 жыл бұрын

Have u had any issues with holleys new high flow boost solenoids? Mine randomly r giving me crazy boost creep over an 1/8 mile pass. Boost vs time is 0 and boost just steadily goings up over the entire pass but if I remove line to gate it’s fine

@dermharse9614 3 жыл бұрын

"# of Beers I Need" and "Patience Level" in the logs lol

@boostfactorypl 3 жыл бұрын

Hi thanks for new video!

@GTStuning- Жыл бұрын

On the 585 rwhp pull on just pump 93, in case you don't recall the timing this one took, what timing are you comfy with near peak trq and peak hp? Thanks Joe

@johnnyc5355 Жыл бұрын

I wish you were local to my area I need a tuner bad and can’t seem to find one.

@jkdwayne 3 жыл бұрын

You gotta Love Customers / Friends like Mike ! Just ring its ass out till it squeals then one more twist !

@wolfparty4234 3 жыл бұрын

My maaan!!! You need a camera man, Bro!!! 💪🏼💪🏼🔥🔥🔥👍🏻

@jar895 3 жыл бұрын

Ok what is Patience Level in log ?

@zsells9758 3 жыл бұрын

Link for that turbo?

@marcuskaiser1730 2 жыл бұрын

@Joe Simpson I have a gen3 Lm7 with sloppy stage 2 Elgin springs gt45 eBay turbo small intercooler 80lb uncapped match flowed truck Injectors could u make a good table to start with around 18 lbs of boost it also has Terminator x Maxx EFI. Could u email a good table if I payed you it's junkyard motor so if anything happens idgaf lol

@ardennielsen3761 2 жыл бұрын

like the meme of the ecoboost thing 🤣

@07bluelbz 3 жыл бұрын

I laughed when you put the helmet on.

@novadre6455 2 жыл бұрын

Joe would tune a ls with a 4500 efi sniper Stealth

@marcuskaiser1730 2 жыл бұрын

I'd love have u tune my LS turbo S10

@rle1020 3 жыл бұрын

Question how much power is a l92 block good for is it possible for a 1000 rwhp with rods and pistons or just stick to a iron 6.0 or 5.3? I can get the l92 for cheap that’s why I ask. I see ls3 turbo builds but very few l92 builds.

@johnolsson3997 4 ай бұрын

Power don’t kill engines it the tune up! You can buy 80k engine and tune up not up to par it will blow!!! Tune up tune u is key to power! If you want light get the aluminum block but if you on a budget get l92,

@jeepramz 3 жыл бұрын

Curious about the table you made for when the meth hit. Mine afr goes 9:1 when it kicks on and takes awhile for the holley to bring it to commanded

@JoeSimpsonAtTempest 3 жыл бұрын

Gotta tune that can’t just let closed loop correct it. Custom table, map y axis, rpm x axis, fuel flow or ve % as the table. Use that table to remove fuel. Corrections the ecu is doing needs to be as close to zero as possible or it’s going to bite you in the ass

@ehworkshop9922 3 жыл бұрын

But a e-tune and watch that pistons fly to the moon

@Wreckedekcoupe 3 жыл бұрын

You make it look so easy man

@TooBrokeToWheel 3 жыл бұрын

No shit, I want them mad skillz

@JoeSimpsonAtTempest 3 жыл бұрын

I’ve done it once or twice before haha

@TPVPRO 3 жыл бұрын

I need a turbo

@kevinhamer6053 8 ай бұрын

Was this water a methanol mixed or just straight methanol being injected

@JoeSimpsonAtTempest 8 ай бұрын

Mix. hell it might have been windshield fluid - was not straight meth

@Boosted370 Жыл бұрын

What's up with that 90+ psi of oil pressure?! Holy shit

@sixx6sixx107 3 жыл бұрын

The owner sounds like David Bird Jones 🤣🤣🤣

@jessehatcher2767 3 жыл бұрын

Give that man a CEE GAR

@Mattvardaman 3 жыл бұрын

The Helmet made me laugh. Protect yo neck!

@karenashcraft8812 2 жыл бұрын

Meanwhile the 4 wheeler guys are saying. That dyno guy is driving us crazy! lol

@JoeSimpsonAtTempest 2 жыл бұрын

I’ve made that comment before in these videos haha. But they come over all the time asking if i bought the side by side adapters yet so they can use the dyno. That and I’m actually working and they are riding wheelies and using the over crowded, busy, parking lot as a race track. I know I’m annoying but their annoying is different haha

@babyruuth 3 жыл бұрын

Exhaust says learn how to vent crankcase.

@FAFO1984 3 жыл бұрын

So....how much timing?

@jamieknight9636 3 жыл бұрын

yeah, I couldn't see the timing in that log when he mentioned it, could you?

@bbcnova56 2 жыл бұрын

# of beers I need lmao

@edwinrosadojr4592 3 жыл бұрын

What pump is it running

@JoeSimpsonAtTempest 3 жыл бұрын

A1000

@FAFO1984 3 жыл бұрын

@@JoeSimpsonAtTempest Hmm same pump im running. But I expect to need more pump beyond those level.

@TooBrokeToWheel 3 жыл бұрын

After watching damn near all your videos, chassis dyno videos.......just......suck. Love your work

@jord9308 3 жыл бұрын

# of beers I need?

@davidmcnerney3048 3 жыл бұрын

Smoke show

@rjinator7447 3 жыл бұрын

# of beers is way too low

@JoeSimpsonAtTempest 3 жыл бұрын

I agree!

@jamieK111 3 жыл бұрын

Ah... check the meth injection before I torch the motor, not to figure wha' happened. Love the videos. Thank you!

@JoeSimpsonAtTempest 3 жыл бұрын

It seems to work 10% of the time haha

@HeadFlowInc 2 жыл бұрын

Mosquito Killer…

@druumoren4458 2 жыл бұрын

My conclusion....are these cars you tune, none of the owners verify if their shit even works correctly. I'm bugging you again, when can I come up there! Hit me up

@NoFox_Given 3 жыл бұрын

Why people even fool with 93 and meth makes no sense to me

@JoeSimpsonAtTempest 3 жыл бұрын

Not my cup of tea but he’s 2 hours away from e85 and obviously isn’t going to drive around on race gas. So not much of a choice on this one

@NoFox_Given 3 жыл бұрын

@@JoeSimpsonAtTempest I get that I guess still I would probably just buy a drum of C85. Where I live in Florida we have a Thorntons gas stations all over and they all have E85 and it’s never below 75% even in December.

@JoeSimpsonAtTempest 3 жыл бұрын

@@NoFox_Given a drum of c85 is like 5x the cost of the engine that’s in the car so i think he’d rather take his chances 😂😂 If it was a “real” engine I’d totally agree but if you can’t tell there is a massive who cares attitude about the engine in this thing haha

@NoFox_Given 3 жыл бұрын

Ohhhh yeah, I’m just saying what I would do 😂. I have E85, ID1000 injectors and -10 feed line and I’m just making maybe 650 wheel. I’m doing everything to not break I think this customer is in the 10% of people who “don’t care I’ll just buy another” 😂

@JoeSimpsonAtTempest 3 жыл бұрын

@@NoFox_Given yup for sure, that is him to a tee. But he’s actually that way. He’s not the guy that acts that way but when it breaks he cry’s. He’s a good dude. Uses cars the right way 😂