0:07 "This is my truck. Everything's pretty standard" 0:22 Here you can see the absolute utilitarian genius of the Nissan Hardbody climate control system. This system gives you complete control over the ventilation capabilities (not dumbed down as in the 3 control climate systems that were prevent shortly after this). You can adjust all the regular stuff: temp, fan speed, a/c on/off. But you have complete control over the input which is missing or forced for you on most cars now. The best part was that if the system fan was off, you could still get a vent air if you set the air input to outside air. Close it if you don't want it. You could also do interesting things like pump A/C to your defroster or feet only,or air condition the heater (works great for defrosting windows).

I have the same truck, fastest 4 cylinder I've ever driven stock

before this video is 30mb 😭😭 take me back

for anyone watching having idle issues like this guy and have a bov that vents to the air it will idle and maybe bog and die and its cause the maf is before the bov which means that the engine is losing air that it thinks it there so you either recirculate or put the maf on the coldpipe (or hot but it seems to make the maf die quicker due to intense heat)

0:14 caveman foot

Wow, those are some.. quality.. welds.

This vid is 2 years old for a real turbo d21& sounds sick. Do you have a parts and cost list for everything? Did you use a piggy back ECU? Please update. I am looking a similar setup. Thanks

now that's craftsmanship

I am planning to do similar stuff to my '95 Pathy!! I was wondering, how exactly did you mount those tweeters in your door panel beside the speaker? I basically have the same door panels, and I have aftermarket tweeters, but wasn't sure how I would mount it, so they are behind the door panel, in the metal!! lol I would appreciate tips!! Great truck!!

major cluster fuck pun intended ............It sounds like a fucking airplane

nice racing shoes

What harness and ecu did you use?

Damn i wish you would come over and help me work on my truck, i am having troublr getting it started

isn't it fun driving from Ramona to Julian then to the lake?

turns starter over while engine running...awkward! where you at on this dude? still have it?

yas queen

I would like to turbo my frontier lol

how did the motor mount up? any modications?

holy wires batman

Thought hard body's were only ka24e stock? did u swap the dual cam in?

What manifold did you use

i like your shoes :B ...

Hey did you ever find out what was the problem my boost ka does the same to me and i cant find the problem i was trying to read all the coments to see if say any results but all this people just butting a bunch negtive coments

do you mean rear sump.....for the oil pan?? pls tell

di the 24de bolt right into the stock motor mounts?

bad ass..that setup in a 240sx is nice so a truck is probably even funner ..whats the numbers???

Nice truck, I give you mad credit on the diy but the intercooler pipe looks horrible. I understand its a work in progress though. Keep on working and ignore the haters

What ever happened to the truck, is 2018

Why is it idling so high?

You should custom make those and sell em because i cant find any for a ka24e adn its starting to piss me off becasue you can only do so much you can do.

dood i have a 95 hardbody 4x4 and the speedo broke too

it sounds like a lawn mower lol but its all good bcus i have the same type of truck haha

How do you know how much gas you have??

@schmauster920 what year is your truck

nice tacks haha

i like it but the reson your boost build so damb fast is cause you have no front mount

After all that work done on the truck.... And your speedometer doesnt work?? Nice paint work dough

Motor mounts can I have 📷

i think you mean SET. that mottor is sohc, not dohc.

what year is it?

What kind of turbo you running?

thats not the truck version its the car version. the truck version is rear sump. hint the oil pan mod he had to do. excuse me i mean me lol

what did that cost to do?

If you can't bolt down your guages I feel sorry for everything else

could you get back to me on this rreally need some help!! is that the ka24det??? out of a 240sx? then you just put thetop end on the original block or motor swap with the turbo on that?

everythings pretty standard ... lol

The truck has a stock ka24. Trucks also use this motor.

julian CA?

Used a potato to do his welds.

Why are you barefoot in the middle of nowhere?

Ive just did a turbo in my 96 HB. Im having some idle issues mainly at cold start up and some time the truck shuts off if i hit the trottle real quick and let off the engine shut off.. I was wondering did you ever get your HB running right and if so what ecu did you use im using an Apexi piggy back system.

150 hp from factory ????????

im sorry but that pipe that comes off the turbo that goes to the other side of the motor is pretty rigged..

93 Nissan 240sx ka24det? Lol

your runnin on empty lol

O.o

fail= turbo intake lol

completely trashed his Nissan...shoes

these trucks are fast stock so slow no

Sounds like an airplane engine lol complelty trashed his nissan....

wow, not a clean swap, very poor job fabricating

Ffs son learn something

Should of did it right 😓 completely trash