The vast wealth of knowledge and experience needed to undertake a project like this is massive, hats off to you young man

This man is out here boosting his bike, and I’m just trying to get mine to run. Sick video!

The Air Filter/Intake setup isn't permanent; I didn't realize how "in the way" it was until I put the actual air filter on. I'm currently in the process of coming up with a solution by slightly moving the whole turbo setup, + fabricating a 180 degree intake pipe so that it faces forwards. E-mail me, or contact me through my website (doctor-motorcycle.com) if you have bike you either want built completely, or you want to have a turbo setup made. As of right now, I'm only going to be making kits for bikes that are installed/tuned by myself at my home shop here in Arizona. There's too many variables in these early stages to start sending kits out. I won't be charging extra for install/tune on these early kits BTW, it will be $3,999 out the door. I can do Virago 920's + 1100's as well, and in fact, the next build I'm doing is going to be a Virago 920, probably a twin turbo setup 😁

This is what a love to see. A freaking necromancer of motorcycles, taking something that was destined for the graveyard and brought it back better than it was originally. You, sir, just got a new subscriber.

I admire your courage, messing around with carbs is a handful and putting a turbo on it is a whole new level. Keep the good content coming 👌.

A quick little tip for cutting aluminium with disc grinder, get a bar of soap and cut into it a little bit before and during cutting. Dip it every now and then. It's night and day the difference.

I like that you upgraded the bearing and seals on the turbo before even using it, that's the kind of attention to detail that shows you did that build right

I miss my Buell. Lots of fun to blast around town. You did some pretty clever stuff on that build. Kudos to you.

That was incredible. I love just zoning out and watching you work.

Had to leave a comment on this. The bike looks amazing. Great job with the rattle can on the tank. Anyone would be proud to own/ride that. I know i would be. Well done.

Love your content, your methods and results are mint! Keep up the great work and thanks for the video.

Really dig videos like this, all walk, no talk

We Brazilians really like custom motorcycles and cars, you are doing an excellent job congratulations.

Nice work. Good to see another Buell back on the road.

This is the first time I've seen something like this... pretty incredible!

Man I love your builds. And I am waiting on your turbo kit for carbureted sportsters to be done testing. Been wanting to turbo my 91 sporty. Keep em coming.

The part where he puts the screws into a piece of cardboard is absurdly satisfying. 🙏💯🙌🏼

I had a Bull 1125R until I binned it hitting gravel across the street at night. It was a phenomenal bike.

Just found your channel and had to binge watch the entire list of your builds. Your skills are next fing level! Love to watch like minded people work their craft. I am in the process of rebuilding/restoring my 1982 Yamaha Seca 650. I bought it new and it's about time for some upgrades. Keep the great videos coming. Thanks.

Epic build.... I wish I had this skill. Saved for later to watch with my fulltime attention.

Nice one Jimmy. The bike looks and sounds awesome 👌

Went to every generation factory Buell school from launch to demise. Miss those days a bunch.

Sorry I’m a little late on watching, super busy week. The bike is SICK doc! I absolutely love it!! Wayyy sicker than my custom Buell!!

Real good workmanship. Top job!

Pretty relaxing watching you working :)

Thanks for the excellent filming!

my dad has an M2 cyclone!!! cant wait to steal it from him to do this.. then i'll return it

This thing is siiick! Great video and build bro 💯🙌

Beautiful stuff as always! Love your attention to detail with your builds 😯

The hardest part of a turbo build is where to put the oil reservoir which is why I stuck to superchargers but every now and then a turbo is just amazing

You get lots of points for putting the proper Buell decals back on the tank. Makes a massive difference for the bike's appearance if you ask me.

Miss my 2002 X1 Buell..great fun riding bike. The key to Buells, is replace every gasket with James Gaskets, and she'll never leak again. Also, fully float the headers or you will snap exhaust studs, I had three snap before figuring this out. I had the full race kit and it was damn fast. People used to say they didn't have any top end speed...BS...I had mine stock gearing redlined in 5th GPS indicated 154MPH. My Ducati ST4S ABS never came close to that, 135ish.

you are an artist. I could watch your videos all day! If I was a rich man i'd hire you to build me a bike!!

so cool. thank's for the work. Filming and assembling this video.

awesome man i love people building cool one offs like this

I used to see truck racing on UK circuits. (A car series I was involved with was a support event to the UK Championship). It involved semi tractor units with water-cooled brakes belching steam as they ran three-abreast into corners at Brands and elsewhere.... Spectacular beyond words This is my image of a Buell... A two-wheeled racing semi. It shouldn't race, but it does. It shouldn't be fast, but it is. And this one (this build) is insane. Sublime. Like Dorothy Paget's Blower Bentleys, this unusual monster is a step past logic and into magic. My disdain for almost everything Harley is great. But this is something else. Chapeau!

I wanted to do this to my 2008 Buell XB12Scg. Buell is my favorite motorcycle hands down

26 seconds in and I was already the best intro I’ve ever seen

Great details on the build... 💪

I probably would have torqued that turbo impeller nut down and put some loc-tite on it... Then again I guess the reverse pattern nut will take care of it coming loose though... I think those little turbo impeller's can spin up to 300,000 RPM though.. You made all the work look so easy though as you know your way around with all your tools and mechanical experience..

I wish you had narrated/ explained the procedure - draw-over or flow-over - how you equalised pressures in the carb by tapping those extra connections - did you re-jet your carb? - enlightened us as to what tubing went where - what turbo did you use and why?

Insane skills....would love to see some performance figures!

Guess i missed my chance to name mine psiclone lol Love the build Cant wait to get the turbo on mine

Das beste was ich gesehen habe bis Dato . Gratulation dazu

Awesome video and awesome content can’t wait for the next video Thank’s

Dude, greetings from Brazil. I'm watching your videos and learning, the gs400 video inspired me to turbocharge my zongshen fly 150cc water-cooled supermoto I'm modifying the engine to 250cc. Your welding machine uses self-shielded wire, right? I built my entire workshop with a machine like that lol. Thanks for the inspiration and congratulations for your work, soon I'll start my project

Best built yet!!! 👌👌

Complimenti.. bel lavoro 👍

excellent work man !!!

bike sounds insane

I like to watch people struggle with bolts, clips or whatever. It gives me inner peace to know that, I'm not the only one.

You can tell a true mechanic by the state of their knuckles.😄

Hi friends, I've been watching you for a long time. I really like what you do. greetings from Ukraine

Oooo the backwards intor is a niiiiice idea man! Might steal that for my channels next vid if you dont mind! Fantastic content, appreciated it, subbed immediately.

Beautiful job!!

nice works .headers work perfect

You are amazing at this!

crazy,crazy,crazy.....oh my god!!!!!! good,good, congratulation!!!!!! i'm from brasilian

Ghost Riders turbo charged Hyabusa was pretty sick

Wow I would love to do this to my Shovel but the S&S super stock 96 or 98 with the andrews gears is already being hard on the clutch but I am positive this man could cure it.

Nice work... with knuckles like that might think you beat up new weather guy...

Signore, sono molto contento di questo video e il mio lavoro è diventato facile, grazie mille

A man after my own heart.

Boy , very good work.

What a great job, thanks for sharing,,,,, 👍

We need more footage of all of your projects running! They are all astonishing but we need more vroom vroom if you catch my drift.

I have the same bike and turbo. This is awesome

Sei un GRANDE!!!!👍🤙💪

Great art for real 🤙

Keep up to good works 👍👍👍

That is a good technique 👍!

Mmaaannn I see this while sitting in my garage looking at my M2 all like hhhhhmmmmm......

I really do like your cut to cut

Now this, is ASMR

Well done.

Always wondered about a turbo BUELL

Love the vid!

Absolutely awesome!! You fancy doing my gpz9r 1984 completely original........in boxes lol

Muy buen trabajo!

Restorasi paling mantap Boss ku 👍👍👍 I like it

Absolute mad Max 🤪 creation

I have same problem with clear coat on first piece. On second, I apply more layers 4 or 5 i think. After cure I dont have orange skin on it. Also sticker put under clear coat for best possible protection.

new to the channel second vid 4 me but both videos had very little seat time. love to c a little more riding ur creations

great to see your subs climbing !!! I remember when you had around 1.7k . congrats 👏 and ty for the content. you keep getting better....waiting 10 years and going back to watch your first build will be cool I'd imagine I'd like you to do something with old Maico 490. I had a few growing up. They hell on wheels...the scariest part of them were stopping.😂 streetfighter,supermoto or some sort DIY ADV would be something different there's not a lot content on them. I was shocked to see they make a 2023 700. I didn't know they were still in business

This is literally a Harley moto. Wish they still made them. Very strong motor

Do you put a spacer between the head to reduce compression? Looks good fun!

Even blurred and blacked out the eye zapper 9000 👌🏻👌🏻

Super cool 🫡

This is sooo awesome! Btw.. can the air filter handle the rain?

Excellent!

Love to see the riding position

My favourite thing on this bike has to be the A symmetry with the guages and the honking turbo. Bike looks amazing!

Dude is that the on ramp to the 101 coming off the roundabout off beardsley at the end? I used to take that route to work every day. Lived in that area most of my life. Sick Buell!

what a beast! that clutch may not be able to handle the extra torque load from that turbo

well done respect

Wow! Awsome! Skills with them tools. looks like a husky project 😳 this is one bad a$$ build. Buell M2. is this bike still around? I wonder 🤔 geez sounds rad!

I want this bike😍😍😍

Good job .i like this vidio.

De l'art ! 👌

The bloody knuckles..... mine look like that after an oil change😂