I love how factory that turbo setup looks.

For some reason this is one of the sickest videos I’ve seen in awhile something about a max speedingrods turbo and that tractor mower had me pinned to my screen always live the content you’re the man G

If you make more turbo tractor videos I will watch them!

The best mod you could do!! Hell yeah let's roll coal! That cute little turbo noise!! More random turbo mods! And animal updates! Also Happy Easter to you and the wifey!!

Honestly one of the coolest projects I’ve seen in awhile. I just wanna see you pull things with it now

Nice 16hp unit! I just fully restored my 1986 430 this winter and turned the fuel up and added a smoke stack. You can turn the fuel up wit hthe fuel screw on the injection pump just like a 12v Cummins as it looks likeyou did! Love it The Yanmar is a bad engine!

10:55 It sound same as 6 cylinder 😍 LOOOVE THE SOUND 888

Always love a HP Logic upload. Jack is such a cool dude and just so freakin smart and creative. Love watching what he comes up with.

That's badass great content could watch this every weekend mods to old Unique lawn equipment

If nothing else it looks damn good! I mean that thing fits so perfectly that it looks like it was designed and meant to be on that tractor! I for one would love to see more tractor videos.

I have a 330 and ordered a turbo for it a couple weeks ago lol. Thanks for the great video. I have seen pictures of other turbo 330s but no videos so I’m glad I have a better idea of what I’m getting myself into..

Jack you rock! Love the channel and content! I'm here for the algorithm! Peace

Haha I love it! Looks awesome and it sounds great! I’d like to see you turbo more small equipment.

Awesome turbo setup. I need to do something similar with my JD790 tractor.

"crisp right off idle!".... really sweet set up! larry

Great job! My 332 has plenty of power stock ( I only use it with the front end loader) but I also put the same engine in my excavator, and it needs a little extra power! I would love to put a turbo on that machine !!!

There’s a golf cart on KZfaq with one of these yanmar 3 cylinders, it’s got stiffer valve springs, a lot of pump work, a compound turbo setup on it, and is paired to a six speed motorcycle transmission. It makes around 30psi on stock internals, and absolutely rips. Nice job with yours though!

this is one of the neatest builds ive seen... crank the max fuel up... the nut on the front of the pump. wind screw out one turn. remove a shim or two from under the pump rack, get some advance. lift the max rpm up a bit. 4200 is fine... some people just take the governor off altogether. im not that keen on blowing up my 35 year old engine. i tracked down a billet compressor wheel thats a direct fit. lot of playing with various turbos.. compound... hybrid... equal length headers... in the end im back on the vz21 and a log.

i have the same mower just in yanmar colors, and i have a garrett vgt gt1546 on it, did that about 10 years ago ported the compressor housing or the “T51r” mod as people know it, just i put piston oil cooling nozzles in the block and a small water/air charge air cooler 😁✌🏻and it makes 5lbs but be aware you will smoke the mower clutch

Very cool! I have 2 Kubota diesel garden tractors that I would love to do this to! One is a two cylinder and the other a three cylinder diesel.

Oh yeah!!!! Trust Jack to pull more power out of a mower by turbo charging it!! Luv this channel buddy!!!

Another banger! It would be cool to see you get in on the custom jet boat stuff..... boostedboiz Kyle and his k swapped Jet boat seems up your alley!?!

lmao that's awesome you made my entire weekend Jack thank you! I just saw a video on the predator ghost racing engine ..not bad for $300, Id love to see u do a review on one get your take on it.

Always love the content!

Man....now I want a turbo lawn tractor lol the smile on your face shows it's definitely worth it. That's awesome man

HELL YEAH! Iv been waiting for this!

That’s mint AF !!! Now you need to have a tractor pull with Chris!!!

I absolutely love how stock that looks!

How’s the turbo holding up on your 330? Used it much since you put it on? Really wanting to see how much vibration those 90 degree pipe fittings can take before they brake. Only reason I’m asking is because I want to do the same thing on my 332. And those fittings look to be the fast way the mount the turbo.

Awesome Jack. Been waiting for you to do something like this. Only because I see it in the background, when is the R34 build starting? Im excited to see all the HKS goodies unboxed, especially the HKS 2.8 step 3.

That came out really nice. fits like factory, and almost looks like it too. Need some more mods now, intake for noise and an intercooler at least. Also the boost gauge is a must, I want to know how much, or should I say how low boost it makes.

This is some shit I like...super unique, simple, and entertaining. Way to go, Jack!

Badass! Crazy cool how well it all fit in there

That’s so awesome, I think I need one now

Hey Jack can you make a video on the Cobb ap situation? Trying to understand what this means for my build. Thanks

Hell yeah dude! This little things awsome

Lmao LUV IT MAN! You got THEE MOST diverse type of content anywhere and its always entertaining!!!!!! I need a tuner for my FD3s but I'm in long Island NY how do I get you to tune it??????

Jack has the best into on yt.

saw the thumbnail and didn't hesitate! TURBO DEERE!

Oh yeah baby boost the world,jack close the hood...i wanted to see you turbo the yellow one jack...

I love tractor content I tinker with them as well. Cheap fun hobby

This is the exact tractor I drove when I was a kid! So good

Sounds good ready for the pulling sled 👍

I'm sad y'all didn't do your scooter race across Florida - 👍 👍 🔧 - 👀

You should have done a before and after dyno pull on the motorcycle dyno, for shits and giggles 👍love it when you do off the wall builds. Miss the RC jet

Run that stack up.

Hey Jack does it have a silencer ring on the front near the intake propeller??? If it does yank that puppy off you might hear that thing really talk when you Rev it. Good vid awesome tractor find!!

You might end up cutting the fuel back a little bit, if you're under a full load and the smoke doesn't clear up, it should just be a little haze when you're at full boost it should only smoke until the turbo builds its full boost, I'm not sure how good the head gaskets are on these engines but they're pretty bulletproof.

An Autozam! Sick! That R34 is a little surprising.

Do you have a link for the main parts like the turbo? This thing is awesome!

Your awesome bro coolest content goes to Jack!🥇🏆🎊

Anything turbo is cool!! 😎

Nicely done 👍

Jack I commented a while back about having a cub cadet pulling tractor if you're interested. It has a kohler engine, pulling tires etc... let me know if its something you are interested in

Awesome Jack! What about a boat with a non-boat powerplant?

Pulling a lot of weight up a hill or cutting very heavy grass or running a snowblower is where you're really going to see the benefits of that thing it doesn't take much with a diesel, 1 psi will make a difference.

Thats Awesome!!

was this a "lets see if i can do this?" ...and can you feel more power? ...was thing about doing this to my kubota..good vid

I have one of these I really want to do this to it.

Would love to see what that engine and turbo could do for a used air compressor I have on the property... how many horsepower is the three cylinder able to produce?

Neat. Gotta like the smoke, hehe. Is that turbo for diesel only or will it fit on a gasoline engine too. I know very little about turbos, is why I’m asking. Thanks. Great video. My hobby is garden tractors.

Now this one ain't got no gas in it.

Thats cool as! Start making turbo kits lol

PUT IT ON THE DYNO!!!!!!!

this is awesome

Are you selling kits or a parts list??? And good job

Thats awesome, tractor needs a stack and a flap!!

This was so cool 😎

Sick!

I know this video is 8 months old but when you ordered your turbo did it come with the flanges or did you make them yourself? Thanks

Where did you hook the pressure and return side of your oil lines to

You gotta Dyno it on the moped Dyno!

Need a stack with a flapper lol

I HAVE THIS MOWER AND HAVE WANTED TO DO THIS

your twisted in the best way

Are you going to pull the coolant plug off the turbo and water cool it?

Sick dude

That's badass

I would love see how crazy you could get with old slant 6 dodge 😂

I didn't know old John deers had tiny 3 cylinder diesels:0

This deserves as many if not more views then rudniks videos

Add some gear to that thing! Come a long way from drilling holes in mufflers in high school! ;)

Would you be interested in doing a turbo on a Polaris Ranger diesel 3 cylinder Kohler KDW 1028 cc ???

That is sick

So badass

We all knew this was coming lmao

Gotta put that thing on the dyno

Sounds like a cummins 12 valve!

thats it

Turbocharge a Prius I can get a hold of one to do it

Nice but why did you weld it directly on it.

would be cool to see you on the collector car feed podcast to rate some skylines or some other car and shoot the shit with those guys.

Needs a DEF system 😂

Sick video

Turbo one of your scooters !!

rudnik will be pissed, he's calling you out!!!

Some money to be made here!

No prep rc!!!!

wow

When epa rolls up coz ur rollin coal in a tractor 😭🤪❤️🏴󠁧󠁢󠁳󠁣󠁴󠁿🦄