Рет қаралды 184,358
Turncycle.ca
Turncycle Centre Stand Disc | Demonstration
Make sure the area is level and free from objects that may interfere with the turning of the motorcycle on the disc.
Move your motorcycle into parking position, set the side stand. Place a leveling mat included in the kit ahead of the front and rear tires. Then place the Turncycle Centre Stand Disc ahead of the rear mat.
Roll the motorcycle onto the mats and stop before the end of the leveling mats. Lower the centre stand and place pads of the stand in the visual marking boxes on the anti-slip cover on the disc.
With a firm hold on the motorcycle lift the motorcycle onto the disc, making sure the motorcycle is centered on the disc. If not, remove the motorcycle from the disc and reposition.
Make sure the motorcycle is stable prior to rotating. To move, gently push down on the rear of the motorcycle to raise the front tire, then turn the motorcycle on the disc.
The motorcycle can be left on the Turncycle Centre Stand Disc until you're ready to ride again. However, you must remove the disc and the leveling mats after you lower the motorcycle off the stand.
Do not drive over the disc.