Thank you for sharing your amazing video, love to see the progress in your project.

Great job!!! Looking forward to the next vid!!!

KUDOS you are great at solving the build steps with soild machining and structure... I'm impressed with your talents... Tight Lines!

Your machinist skill is to be commended, considering the equipment utilized.

I am glad that you already have built this so I can watch one after the other, I don't know how I would do waiting as you have really impressed me with the knowledge of different tools about. It has been some time since I saw a drill cut like it is supposed to

Love the sounds of the shop: Very purposeful and inviting. As always, great content and good editing. It's coming along well. Having the metal lathe really makes a difference for all the shafts and wheels you have to do to get it going.

Yes another portable sawmill video, my Friday just got better 👍🏻👍🏻!! Thank you for the awesome video and keep up the hard work ,my friend. Anyone else like the video before watching because they know it's going to be a good video ?

Another fine video, it's coming right along. We sure do enjoy watch how you build this band-saw mill. Can't wait till we see it in action but keep up the posts and videos on how you are doing. Thanks again. Going back to my dreaming.

Great job dear brother .. Take care & have a nise day..

you know i have been watching u build this and yes i have seen many of builds and i think u should sell them it is a great looking build and it looks like it cuts great when u start i want to be the first in line

awesome work!

Really enjoyed the video! Very educational, I learned a lot from your build as I have watched many sawmills vides. perfect editing with a clear understanding. also liked the way you put your measurements on the material. had the add this to my favorites. Keep up the great work.

Fantastic man..... Amazing

Research and Development got to love it.

So cool. I have always wanted to learn to weld and use a lathe. I am fortunate to have access to both. Time to get moving.

Awesome video👍

Beautiful work

I like the drilled/greasable bolts. I used some of of those when I rebuilt the shackles on an old land cruiser of mine. Very cool touch

Nice work.

Awesome, as usual! Looking forward for the next video :P

Super Video, cool lathe and amazing project! :-)

Nice work

Amazing video again!😄

Great job doon greatness from Dubai

Nice build!!

My first time watching you this is great job done keep it up and share more with us

It’s looking Pret-ty good. The motorcycle wheels are looking like a very good choice for the saw. A coworker of mine made a bandsaw and used trailer tires but the rounded profile of a motorcycle tire looks more appropriate plus you already have a drive sprocket and if you wanted you could utilize the brakes on one wheel to stop the blade as well. You will be making lumber in no time. 👍🏻👍🏻

I really enjoy the videos and admire your thought pattern. A mark of Excellence for us backwood guys!!! : D

Man... I wish I did this when I was younger. Stay away from drugs and alcohol kids and you can do something with your life!!

Excellent !!

Nice start ppe

Станок времен СССР ))) Точил на таком я! Хороший станок!!!

Awesome 👏🏼

Very nice

excelente trabajo gracias por compartir

Nice Work...

I tune in each week waiting for him to steal more parts off his brothers stuff. I also love the cryptic messages left in the steel... 'All we are saying is give "PEALE" a chance.'

I am following with great interest your band saw mill. I see myself in your project, as you can do a lot with litle. By the way your lathe seems to be a good one, quite heavy it seems. Thanks for posting and catch your next video in a bit!

Fantastico o teu trabalho

Subbed, awesome skills

Awesome!

This is who I want as my neighbor..

Very cool.

Well done,master!!! You sharpen everything with one cutter, no more?

Good stuff! The blades guides look great. Could the wheel tensioner mount on top so you would not have lost any height?

Sawmill is coming together.

a question? When you put the cutting tape on the tires as you do so that it does not come out when it is on and cutting

Good job

ده ست خؤشبيت سةركةوتوبيت انشالله

Gretat job . Which blade are you using ? On my sawmill it doesn't cut straight the theet are too small and also thicker.

Another question, @12:32 you made a boult with grease point. It brings the grease between the barings in the roller. But the grease has nowhere to go, in the end it will push out the barings.....oh wait is that the purpose!? To be able to change the barings? It looked like closed barings, so they don't need grease. If they do, there must be a drilled hole in the roller where the old grease can escape. Can you tell me your thought on this? 👍

Watched all your build videos on this mill, great work and very well done videos. I am in the process of building a mill and my lathe has no lube. What did you use for cooling/cutting fluid with the brush when turning the wheels?

Awesome

Tá ficando bom ein . Já uma desse tipo com motor de moto, funciona muito bem .

Hi Donn fantastic build ,do you have a brake system on your wind up and down chain crank

When you mount the guides, it is my understanding that they do no go in horizontal line with the bottom of the wheels. They sit lower than the bottom of the wheels. Not sure why. Check out other saws. Good luck ~P

Hola Donn DIY estoy siguiendo tu maquina de aserrar madera me parece fantástico tu trabajo voy a comenzar a armar una siguiendo tu vídeo .. good job men..

No se inglés pero da igual admiro tu trabajo y esmero cómo lo haces

How does the grease get in the bearings of the guide wheels for the blade? Don't you have to make holes in the shield of the bearings on the inside side? Or take the shields off?

Soy un fiel seguidor tullo

Получить супер.

aguardo ansioso as suas postagens. I look forward to your posts.

Have thought of a spring/damper as (automatic) tention device (in stead of) the boult you just made? Or this will work also great, because of the air tyres, working as springs, to keep the tention on the saw blade even. 👍👍😎

Excellent work. I really enjoy your videos. I have a couple of questions 1. Why didn't you drill the hole in the part at 1:02 on the lathe? 2. Why didn't you part all the way off rather than part way through and then break? Looking like it's going to be a pretty decent machine. Well done. Regards Mark in the UK

Молодец!

good brother

great

золотые руки у парня

Just a suggestion it would have been nice to see you do the tensioning by pulling the Wheel from behind it. But looks good

oispa itelläki tommoset vehkeet niin tekis ihan mitä vaan. olet tosi taitava tekemään asiota, ja hyviä ideoita

Просто класс! Подскажи пожалуйста характеристики (размеры) полотна пильного.

meu amigo, quantos RPM E SERRA DA LAMINA CORTA BEM ? TENHO MOTOR DE 1800 RPM QUAL SERIA A RPM DE CORTE DA LAMINA ?

how come you just didnt drill it while in the lath ...no tail stock ...?

En España tendrías Gran futuro

Tubli töö ja meeldivalt kokku seatud video, kohe lust vaadata, edu töös!

Работа на "коленке". Без чертежа по натию... молодец чувак.

Very cool video. How much travel in your blade tensioner from full slack to full tension? Thank you

What is the correct speck for the band saw blade. Tip. Width. Material. Set.

Kreasi keren

Beautiful job love that lathe what size tires are those on the bandsaw are those at the rear from a Honda?

Колёса от Явы или Ижа?

Can someone explain to me how the sawblade is going to stay on the wheels when sawing?

It is like he makes all the pieces that I think could be bought instead

Tervitus! Vaatasin kuidas keeret pingis peale lõikasid ja mul oli seda eestlasele omaselt kahjurõõmus vaadata. Olen ka ise nussinud keermeid selliselt lõigata ja käesoleval kevadel tegin omale siis uue keermelõikuri hoidja - kunagi tehtu varastati mingil ajal ära ja uut ei viitsinud kohe teha. Mul on üks siuke vidin sulle välja pakkuda - ise pead tegema (materjaliks vali natuke parem kui S355; näiteks C45), aga mudelit jagan sulle, sealt saad ka vajalikud mõõdud. Võid teha ka pikema või siis suurema. Olen enam kui kindel, et kasutad SolidWorksi, siis selle kasutamine ei käi sulle üle jõu ja saad vajalikud mõõdud sealt kätte ;) Mul videot keerme lõikamisest ei ole aga ülimalt lihtne on kasutada - tegin just kiire demo tööriistast. Eriti hea on sellega pikki keermeid sirgelt peale lõigata. 3D failid leiad allolevalt lingilt. grabcad.com/library/thread-cutter-holder-for-lathe-1

I want the measurements and especifications . Do you sake them?

Com tanta ferramentas boas o cara vai e faz uma gambiarra dessa😥

Спасибо

which is the size of the wheels?

You’re so talented how did you learn all these skills? Self taught? Or?

I would be dangerous if I had all those toys.

That was a huge drill bit, I'd hate to have to buy one that big these days. It would probably be so expensive o.O what size is it?

👍

Can I come build stuff with you man plz haha

I mean, do you sale the measurements sir?

when you make a screw- thread it's better to grease it with lard

Nice work Donn. You may find that those blade guides wear out prematurely. The ones you buy from Wood Mizer are case hardened. How do you plan on sharpening and setting your blades?

ใช้น้ำมันหยอดมันทำให้ลื่น แต่จะไม่ลดความร้อนจากดอกสว่านได้เลยอาจทำให้ดอกสว่านไหม้ได้ครับ

Not the safest threading lol but I can't say that I've never done that lmao

I believed it is more cheaper to buy a lumber pro than to assembly a sawmill like this, but anyway you have a shop available to fabricate..

If you have the double adjustment on the one wheel, why didn't you use that as a tensioner? It would work the same as tensioning the chain on a motorcycle. Instead of adding it the middle?