Now….that is how you put a realistic twist to mushroom!!! Good job!
@DavidsonCrafts2 жыл бұрын
Thanks so much.
@joeyl599429 күн бұрын
That is awesome
@DavidsonCrafts14 күн бұрын
Thanks so much!
@rroberts8501 Жыл бұрын
Excellent... New turner here and two things that stuck out to me that I learned... 1 charring the base for a little warp and 2, off center turning. Never tried that. Looks like a fun project and I will definitely give this a go! Also glad to see others that use carbide tools in conjunction with traditional tools. For whatever reason, I had it in my head that I needed to start with traditional tools and then became frustrated and moved to carbide. I now use them both on projects, but I thought I may have been in the minority. Subbed...!
@DavidsonCrafts Жыл бұрын
I'm glad you found some value. I hope your off center turning goes well. Thanks for watching.
@kenvasko22852 жыл бұрын
Nice. The stems really made them unique.
@DavidsonCrafts2 жыл бұрын
Thanks so much.
@MrDilmaher3 жыл бұрын
Liked the way you do your mushrooms
@DavidsonCrafts3 жыл бұрын
Thank you. I enjoy making them.
@michaelshultz88142 жыл бұрын
Excellent video and a huge learning session for me. I've spent hundreds of hours on my lathe and could never step off into offset turning. I will now. You made it seem easy. Sharp tools are key. Thank you very much.
@DavidsonCrafts2 жыл бұрын
Thank you so much. Encouraging others to try new things is the main reason why I share my projects.
@keithkimsten5111 Жыл бұрын
Nice work. I liked the base as it gave the feel of being in the woods to the project. Thanks.
@DavidsonCrafts Жыл бұрын
Thanks so much for watching.
@ronaldwalters6027 Жыл бұрын
Ha man, That's cool, good work
@DavidsonCrafts Жыл бұрын
Thank you.
@delightedhands3 жыл бұрын
I find a lot of interesting mushrooms in my woods and now I can try my hand at wood turning some! Thanks for the info!
@DavidsonCrafts3 жыл бұрын
Thank you. I hope your mushrooms turn out great.
@davidrennie13622 жыл бұрын
Wow.....fantastic work on the mushrooms. I have been trying to figure out the offset turning for a bit now and finally thanks to this video; I've got it. Thank you for sharing.
@DavidsonCrafts2 жыл бұрын
Thanks so much. I’m glad to hear that the video was able to help you out.
@johnheyes49002 жыл бұрын
Great project love the offset work, thanks for sharing👍👍👍
@DavidsonCrafts2 жыл бұрын
Thanks so much for watching. Glad you like it.
@eddiehall35993 жыл бұрын
nicely done
@DavidsonCrafts3 жыл бұрын
Thank you.
@ian75832 жыл бұрын
Nice job bud love this project 👍
@DavidsonCrafts2 жыл бұрын
Thank you! Cheers!
@glenndornak64103 жыл бұрын
Great job. I liked the way you did the stems.
@DavidsonCrafts3 жыл бұрын
Thanks so much. It was a super fun project to make.
@germainrioux9452 жыл бұрын
awesome
@DavidsonCrafts2 жыл бұрын
Thanks so much for watching!
@susanprior69083 жыл бұрын
These look great. thank you for doing this
@DavidsonCrafts3 жыл бұрын
So glad you like them! Thank you.
@alohomewoodturningcarlos52673 жыл бұрын
Nice one mate great job watching here friend sending full support new sub here.
@DavidsonCrafts3 жыл бұрын
Thanks for watching and for the sub!
@ultrawoody19682 жыл бұрын
Nie work
@DavidsonCrafts2 жыл бұрын
Thanks so much.
@TeresaJohnson-ew4us Жыл бұрын
How cheap is this ??
@DavidsonCrafts Жыл бұрын
Sorry, I’m not sure I understand the question. Are you asking how much it cost to make or if I sold it, how much would I charge?
@robira13133 жыл бұрын
Just starting out and I'm impressed with your techniques. I wished I would have purchased the carbide tools as opposed to the traditional ones, but I just can't seem to bring myself to spend $300...yet! Is there another more reasonable brand of carbides that is also good quality?
@DavidsonCrafts3 жыл бұрын
Thanks for watching. Carbide tools are great and I love using them but you're right they are pricey. There are many brands out there but I'm only familiar with Easy Wood Tools. I've found that woodturning forums are good place to get some info without people trying to sell you something. Good luck.
@55stanmc2 жыл бұрын
I got three chisels, one round, one square and one diamond shaped for detailing in a nice storage box from Grizzly for about 100 bucks….. they are my “go to” chisels for most projects….They are so easy to use it almost feels like cheating!! Lol
@daniellegrandpa Жыл бұрын
You make 4 off center marks on the end, do you use all of them or just one or two?
@DavidsonCrafts Жыл бұрын
Great question. I'm pretty sure I used all of them on this project. Typically, how many you use will depend on the shape you're wanting. Thanks for watching!