Really enjoyed this longer episode. And best line for me was "these old things are always so neglected yet they never want to leave".

If that is really his dad, man he's the best dad in the world who has no ego at all let his son take the shine, while he stays in the background. One in a billion.

A few casual observations from a 50 year "Bring 'em back alive" veteran. Harbor Freight has a $30.00 chainsaw chain sharpener that works very good. Always bring rims and tires also some 2x12 blocks to put under jacks, jack stands and tires. BTW the Chevy looked like it had a later 235 engine with full pressure lubrication.... good. Now for the best... The Willys Aerocar Ace is a car that the meter is headed up on. Spend a little time and read up on them. I had a '53 Aero Eagle that I wish I still had. It's the gold in the haul. Have fun and happy hunting.

I lived in small town in Arkansas! Right behind my dads house is Nothing but thick woods! My dad parked his 48 Chevy pickup behind the house at the edge of the mountain, at the time they kept everything cleared up, but after 40 years their is nothing but thick woods, it would take a miracle to get that truck out! It is completely covered up and that land has since been sold, and my Dad has since passed away! Those woods are now part of the rest of the mountain, nobody but me knows that truck is still in their!

This man's country accent is LEGENDARY Reminds me of home, good pie, good people, good times

Loving these retrieval projects. Also the respect you show to the land owner. regards from Australia

Absolutely love this video!!! I think sometimes seeing the holes and nooks and crannies that these old relics get dragged out of is just as interesting as the restorations themselves!!!

I drove a steel flatbed wrecker for several years. A trick I used to get across bed easier was liquid dish soap. A few squirts on the bed to make whatever path I chose. I hope this helps in the future. Plus it is easy to clean up after you’re all done. God bless and take care.

Great video. As a retired firefighter, a good investment that be very beneficial to you might be some air bags like we use to lift vehicles on emergency scenes. You might check those out. They just slide into place and will make short work of a buried vehicle. I enjoyed your rescue of the old Chevy!

They're just down here" looked like it turned into a bit of a drive. I absolutely love the way father and son work together. We really need a LOT more relationships like these men have in this country.

Guys, I believe the 3100 is 1949 or 50, as fuel tank is behind the seat , does not have window vents and has turn down door handles. Cool truck, I have a 52" Love the work you guys do keep it up.

1 hour and 23 mins??? This is what we want!!!!! Thank you!

That mirror reminds me of a 3/4 combination spanner that went missing, I knew I’d had it when I was playing with one of the kids. I found it a few years later, only about 10 feet from the workshop, a branch had grown through the ring end, and took the spanner about four feet from the ground.

Love your videos! Happen to drive through Bogata a couple weeks ago on our way to Longview TX from KC to pick up a 1959 Chevy Apache. Stopped at your shop to admire your collection not knowing you guys are "KZfaq Rockstars".... Keep up the good work!

You need to get yourself a set of sliders like tow truck drivers use, they are called SKATES. Once the tires get on the trailer you just slip them in front of the wheels, then you can direct that truck in any direction you want. I think they are just made of a real heavy plastic. Great video 👍👍

Here's a suggestion: add a 4" X 4" piece of wood to your kit with a notch on one end that your cable can lay into. You can use the 4 X 4 to lift one side or end of a car by standing it on end, leaning toward the vehicle at a 60 degree angle. When you retract the cable, the board will pivot toward the trailer thereby lifting the vehicle up out of the hole. Same technique could have been used to lift the truck up onto the trailer so it wouldn't have been plowing. Small things will save you a lot of work on those hot Texas days.

Great,,, really like your laid back approach to the way you handle things,

i love how well you two work together. team work makes the dream work

Its so cool to find those classics and the fact that its you and your pops as the A-TEAM love the show.

Here is a tip guys for a great quick budget rust breaker penetrant, perhaps you do know. Acetone and ATF, mix 50/50. Make darn sure you put in a spray bottle that you close after every use as this mixture pentrates so well into bound parts that if left open the liquid creeps out of the spray jug. Make sure to shake well before use as the two liquids can separate and then you only spray one and the mixture is diluted. Try it, it has been a great maintenance improvement around my place in Central west Alberta, Canada. If I am planning on working on something that has sat awhile I will mix up a jug and spray down all components involved and man, I tell you what, what a difference in labour and busted knuckles!!!!!! I really appreciate your message here and your hard work, Thank you and God bless!

That is serious dedication... Really enjoyed this episode, many thanks

Really enjoyed it. Editing , excellent , especially transitions. All the physical pain they endured is palatable. Prolong chainsaw scene makes sure of that. Music and the Deep Southern dialect , is easy on the ears and so fitting for the subject matter. I subscribed.

Damn,brings back my "fine". 1962 Ford Vanett a old bread delivery truck, that was converted to a RV. Motor was sized, and had to cut down a tree to pull out. Called my 90 yr olduncle to see how to get motor working, he told how to do it. Worked on it for 10 days..... Started right up after working on it. Had it for 15 years and people ALWAYS came up to me and asked all kinds of questions about it.. wanted to see the inside and motor! It looked just like that old white IH at the the beginning of this video!! This made me Smile !!! Thanks !!!!!!!!!!!!!!!!!

I salute your hard work to remove the vehicles. You both have made the mission possible so calmly and without loosing your temperament. I would love to see when vehicles are in good running condition after necessary repairs etc.

You work really hard to get your projects home. Sometimes I get a real desire to work. But then I sit down until the attack goes off. 🍻

Great video! Here's a tip for you. It's time you need that little bit of dw40 that's left in the can and there's no pressure, put a dent in the side of it. That'll usually create enough pressure to get the rest of it out.

Its good to see somebody on youtube that speaks Tenne-sippi like I do! Likeing the content👍

You guys are a couple hard working dudes ....Can't wait to see the old truck back on the road :)

Awsome video and I really love what ya all do and happy ya save old rusted up vehicles..thank you and godbless

wooo! Just imagine how many properties with treasures on them, like that, there are across the world... good find dudes!

I love watching you and your dad more more videos lol keep up the great work thanks for sharing

Dad's line.... my favorite. . 'At least with that cab over we don't have to worry about the rear end being locked up' THAT'S A MAN...WHO THINKS AHEAD!😎🙏

When you were dragging it onto the trailer I was at home alone just yelling “USE THE JACK TO JACK UP THE FRONT END AND TURN THE WHEELS BY HAND!!” Lol I’ve drug old trucks and cars out of fields too many times.

Love watching your channel.. very entertaining, to the end.... oh! Those wheels turned that Ford out...😁

Turning Rust , Guy i really enjoy the way you guys consider or agree and get on with tackling the rescue or unearthing etc of these abandoned or neglected vehicles :)

Hey guys. New to the channel. Actually found you guys looking around and I like the idea of you guys trying to get some old cars and trucks running. what you found so far was awesome guys. Cant wait to see how you guys repair them. Thanks for sharing.

Love all your videos and loving this old Chevy truck!

One thing that may help in these cases is to run a strap from the rear and the front too then hook a chain to both straps then to the trailer and pull at a 45 with the truck and trailer and it will pull to the side, love the vids keep up the good work

I appreciate that you guys didn't edit out all the boring reality parts of doing a job like this. Sometimes things don't go as well as we plan and I'm glad you guys left that fact of life in the video instead of editing it down to look like you get everything right the first time lol

Man, you two really worked for what you brought back to the shop, but what is really cool is some vintage iron was saved from the crusher(for now anyways). What really impresses me is your mission statement, "Serving God & building Rods"...God Bless you both!!!

Thank You all for the work that you do and keeping you’re channel clean of ugly language. Also I’m thankful to here you serve God. Keep up the great work guys!!

If only these vehicles could tell their stories like a time capsule

I watched this one a long time ago, but when it popped up today I watched it again. Really liked it.

Also, keep a couple snatch blocks handy. The snatch block can help pull the vehicle to one side as you pull vehicle onto the trailer.

Great video guys! Being a car lover, its great being a part of the entire process. Keep up the good work! 👍

Saw chain needs a good sharpening. Good to see this. Had a 53 when I was 18, traded it for a color tv and bow. Just bought a 51, drive it every chance I get.

That chevy P/U is either a 47-50, 51 they started using wing windows and 52 had wing windows and push button door handles . Turn down handles is definitely 50 or earlier unless someone swapped the doors back in the day.

You really showed what we go threw to get these old cars and trucks. It was like I was with you digging it out.

Brand new to the channel and subscriber. Looking forward to seeing the restoràtion. Thanks again for sharing your thoughts and videos Rodney

I finally got round to watching your vid thank you for saving these old car's . Have a look at an off road air bag Jack to lift buried find's good luck

Wyatt you nailed it. It's called age and it don't get any better!

Love the format of episodes. Very well put-together

Thanks for the videos! You can pump those WD40 cans back up with a tire valve stem and air hose.

"I prayed about, see if that helps", subscribed! Love hearing spiritual faith involved in work. Need more of that on You-tube!

I envy you guys working with the oldies thats when cars and trucks were simple

Great job guys! I kept thinking you would jack front and put a pipe wrench on steering joint and straighten tires - as I have done that a couple times and it works fine! Blessings! Tom

Already got the license plate for the W Ace. "L ACE 1" after the LS swap! Even the 70s gas pumps are getting hard to find.

I m watching you from Romania! Hello everybody!!!!

BEST EPISODE EVER....Thank You Guys for what you do....This Willys Car just Blows my Mind...Wow, May the Lord Bless You and your Family for keep this Guy entertained:)

Love the music! I know those licks cost money. It's a nice touch that really adds to production quality of the channel guys. Also, I'm glad I'm not the only one that lets his inspection sticker slide...

That's cool you got a good relationship with you pops that's cool 💯👍

man what a deal on that stuff. I'm in love with those trucks. I wish I could find one priced that reasonably.

Uk fan here.... i want to hear the story behind that classic mini out the front of your shop that i have noticed in a few of your videos!

i really like your video's thank you so much for sharing i know that your uncle Franky is very proud of what you have become thank you again and may God richly bless you and your family

Excellent video. I just found this and I love to watch old vehicles being rescued. The filming is seriously good quality, What do you use for the filming of this?

you really need a snatch block for your winch. it will make it so much easier to pull it over and stead of a ratchet strap.. Nashville Towing & Recovery NASHVILLE, TENNESSEE

Never seen you before but I really like your videos. These cars and trucks were around when I was young.

Good job i love ur work guys from greece i love ur channel..keep the good working.

Someone get these boys a chiansaw file and a handman jack.

"Always be looking at the woods" Always a good place to look back to.

Alot of haters in the comments but good honest days work fellas. Always a pleasure to watch and see the gems you folks find.

Love your show! Have watched some where do complete to paint, hoping someday to see a series of ones we only see get started, videos of what happened after. So many cool old vehicles. Looking forward to seeing what you did with what I call volksinstien after got running. (That 3 wheeled beast inventor built)

Y’all made an awesome deal on those! Love the good content! On a side not I believe your chain needs sharpening in the saw lol. Keep it up guys!

I fealt your pain on this one. Feels like my last few trips to the junkyard lol

Good to see you are saving these cars and trucks.

I'm in Hound of The Baskervilles Country "Dartmoor" which is near Plymouth Devon England, If we ever do find old vehicles they are rotted down to the axles due to the wet weather we get in winter. How good is your weather that you can find 70-year-old vehicles still in one piece? You wouldn't find anything more than axles if you lived where I do here in Plymouth, Devon, England. God Bless You All and Thank You for the videos.

Another great video 👍 Keep them coming...

Love the shows. Keep em coming. 👍👍👍👍

Can't wait to see how the old Chevy truck turns out! Awesome episode guys

what a beautiful find

I was just thinking that we hadn’t seen anything from you in a while. Love your content. Picked three trailer queens😄 and a gas pump. Nice drone work too by the way. Can’t wait for the next upload! 👍👍☮️

Love learning about stuff on this channel !

I absolutely love your videos....thanks for sharing....great trailer by the way

Carry a pipe wrench with ya, if you can open the hood you can get to the steering. Nice trailer for car hauling. Wood trim is usually on the inside of the vehicle, but you have started a new trend.

I would love to own that mirror that is a one-of-a-kind and that Willy's is pretty badass to

That Willy's Aero is really sweet.

Thanks for the recent videos fellas, always enjoy the content! However, I'm ready for another multi-part build series! How about a mad max tribute? 👍

beautiful recovery and peace of equipment i like this kind of pick up

that old Ford, looks like they cut the frame and bed to make a trailer out of it.

That Willys has the most potential, I could see a gasser for the strip, or a ratty-looking big motor street sleeper.

love to watch you guys do this, and you sure got a good deal, spend some of the money you saved on those new air jacks I have one and it saves a lot of effort and a good thick few pieces of ply to lay on and put the jacks on

I Watch your videos when I can. Love em all!!!

i like the "back and forth" handsaw action with the chainsaw..im sure that helps "wink"

Willys Aero, 1952, had a V8 once! Cool find!

I road around in a Willys Arrow when I was a teenager and rebuilt the the transmission. Motors ran like a two cycle.....had to get the oil and gas mixture just right. It would create an excellent smoke screen as you drove around town. Finally gave up in 1965. Sure wish I had it again.

Great job guys. This was a tough one for sure. Keep it up

I want to see them patch the oil pan and fill the engine will diesel and the cylinders with diesel and break the engine lose and get that old chevy running!!

The wire wheels in the back look like '35 Ford. If they're in good shape they're probably worth what you paid for the truck.

WOW watching these gets me excited. The only difference is I would try to work a deal out on all that scrap metal. I would torch the big stuff up. Love it

Cool to see some authentic finds