Tusk Motorcycle Crankcase Splitter Tool

No video

Tusk Motorcycle Crankcase Splitter Tool

Рет қаралды 96,942

Күн бұрын

Tusk Crankcase Splitter
www.rockymountainatvmc.com/p/...
The Tusk crankcase splitter / separator is an indispensable tool if you are performing a bottom-end engine rebuild on your motorcycle or ATV. It makes the process of splitting a case a breeze and will work like a charm for most 2-stroke and 4-stroke vertically split crankcases - especially since the tool's adjustable arms allow it to function properly on many different types of bolt patterns. The splitter also makes disassembling the crankcase simple by allowing you to safely push the crank assembly right out of the case halves. It used to be that splitting the case was only possible with expensive tools. The Tusk crankcase splitter / separator has changed everything with a quality, affordable case-splitting tool.
Click Here To Subscribe To Our Channel!
/ @rmatvmc
Follow Us On Social Media!
FACEBOOK: rmatvmc?utm_...
INSTAGRAM: rmatvmc?ut...
TWITTER: RMatvmc?...

Пікірлер: 44

@TheAefril 5 жыл бұрын

Awesome instruction and step by step commentary with cautions at critical moments. Great work, keep the videos coming!

@Tim2Wheels 5 жыл бұрын

This is a great tool. It makes the job so much easier. Thanks for making a quality product at a reasonable price.

@Changtent 5 жыл бұрын

Pure Gold. Thanks for a great video.

@jonsmith3723 Жыл бұрын

Thank You! That was just what I needed.

@rungassamydonovan47 7 жыл бұрын

love this channel.keep it up guys!

@pacerracer3964 5 жыл бұрын

Cool tool. I need to split my casing on a YZ250h just to clean it out. The previous owner had already removed the piston but I found a spec of metal probably from the piston on the crank. I do not think I need to pull out the Transmission but just be able to get in there and clean out and inspect the gears.

@superdave103harley 7 жыл бұрын

Great video as always guys

@rmatvmc 7 жыл бұрын

Thanks superdave103harley!

@evofreak1304 7 жыл бұрын

a great tool

@Georgia4Low 7 жыл бұрын

we have that same tool and it works great and priced nicely.

@rmatvmc 7 жыл бұрын

We appreciate your business *Dirt Hammer Dual Sport & Adventures*!

@billybobbubbawubba9457 4 жыл бұрын

I have the crank pusher tool. Have improvised homemade puller tool. Wish I'd just bought this one. Need to get over a lifetime of "stupid cheap". Time is more important.

@Shmack_ Жыл бұрын

Best tool ever. Do not mark up your crankcase trying to split it with a screwdriver or something else

@Temp354 3 жыл бұрын

Can’t get the crank out from the other side because there is a bolt on the crank gear. Won’t come off

@alanssnack1192 2 жыл бұрын

my case has not come apart evenly, the back part is stuck together ,

@chrisjones6946 Жыл бұрын

Hi can anybody help I got a 1998 rm125 gear box problem the problem I can shift the shift drum by hand from 4th gear into 5th and back down into 4th but when I try to turn the shift drum from 4th gear down into 3rd the whole shift drum locks up solid and won't move could this be a bent shift folk or the actual shift drum itself any help appreciated

@kennethwilliams5231 Жыл бұрын

Can i use this on a 1340 shovel head

@kklogins 5 жыл бұрын

Can you just use regular high heat silicone bond to mate the 2 halves again or would you need the "glue"you mentioned at: 3:48 ?

@jotacalvo 4 жыл бұрын

Danny M. Roque Permatex MotoSeal (same thing as Yamabond) $7 tube at auto parts store.

@jonnysnipes3123 3 жыл бұрын

You don’t really need the crank puller do you?

@BicycleMotorsports 6 жыл бұрын

Would you by any chance know if this tool would work in conjunction with a 66cc 2-stroke?

@andrewmcquaid8580 5 жыл бұрын

Yes

@earnestbrown2643 6 жыл бұрын

So could you explain on how to get the crank out from the other side?

@djgoldens1 5 жыл бұрын

Yes i need to do the same thing did you ever find out?

@Kit-qc8lt 5 жыл бұрын

Need to buy a crank puller

@g-man-8096 7 жыл бұрын

did the bike blow up because my piston looks a little bit like that one should I replaced it

@swiftey1659 6 жыл бұрын

I think this is the engine of the 2004 yz250 build, before they installed the wide ratio transmission and wrench rabbit kit

@sn1per328 15 күн бұрын

do you band the crankshaft with tool or its ready to go back in?

@rmatvmc 15 күн бұрын

Band? Bend? No. This is to prevent damage to the crank and to keep it from being knocked out of true. It also helps prevent damage to other parts from separating it any other way. -Charles.

@smoke05s 4 жыл бұрын

Ok I got the cases split. Now what tool do I need to get them back together?

@mikebianco2976 4 жыл бұрын

you shouldn't need a tool to get them back, just freeze your bearings and crank before disassembly and warm the cases.

@DrPep-gk8jz 10 ай бұрын

Do y’all sell the glue one can use when putting the cases back together since there is no gasket there?

@rmatvmc 10 ай бұрын

We sure do! There are plenty of options so you will need to see what will work best for your specific application. You can check out liquid gaskets here: www.rockymountainatvmc.com/parts/dirt-bike-liquid-gaskets

@DrPep-gk8jz 5 ай бұрын

Thanks! I just got the case splitter!@@rmatvmc

@speedyReedyEnterprise 2 ай бұрын

Can/will this splitter work on Harley crack cases?

@rmatvmc 2 ай бұрын

Yes, it will work on a Harley crankcase

@tommycocacocke 5 жыл бұрын

is this a universal tool? Will it fit a Husaberg 470 2002

@rmatvmc 5 жыл бұрын

Yes, this tool is universal and will work for any 2 or 4-stroke crankcase that's vertically split. If you want to check it out more you can check out the product page below. www.rockymountainatvmc.com/parts/tusk-crankcase-splitter-p Thanks for watching!