Splitting The Case / Removing Crank !

Splitting The Case / Removing Crank ! - Yamaha YZ250 2012

Рет қаралды 27,339

6 жыл бұрын

Support us by grabbing your parts and accessories from AOMC.MX!
aomc.idevaffiliate.com/100.html
Thanks for checking out my video! Please subscribe, like, or comment, and check out our gear below!
Also, check out our other channel / rtipowersports
My gear!
Action Cams
GoPro Hero 5 Black
Primary GoPro Action Cam : amzn.to/2ADAJ6M
Waterproof Housing : amzn.to/2B0Xt3n
Mount Kit : amzn.to/2kx6YAA
Battery / Charging Kit : amzn.to/2B6HY6x
Yi Lite Action Cam
Secondary Action Cam Yi Lite : amzn.to/2kvHjYW
Yi Cam WaterProof Case : amzn.to/2kvbn7a
Selfie Stick / Tripod : amzn.to/2AWnfpp
Handheld Gimbal Stabilizer : amzn.to/2BJbord
Drone
Primary Drone DJI Mavic Pro : amzn.to/2AXNXxB
Mavic Pro Battery Multi-Charger: amzn.to/2BDn3Jk
SD Cards : amzn.to/2DcU3Zn
Vlogging
Vlogging Cam : amzn.to/2Covk48
Vlogging Mic : amzn.to/2CmzRnH
Vlogging Camera Adaptor: amzn.to/2zN3N9L

Пікірлер: 20

@nickhardey2111 11 ай бұрын

Could I weld the drain plug threads on this type of yz? I have an 01 and a magnet sticks to the bottom end like it’s steel? I stripped my drain plug and have a slight drip now.

@AdrenalineRushMX 3 жыл бұрын

can i keep the clutch in i just need to reseal the crankcase

@Sanguine_Addiction 2 жыл бұрын

NICE! Don't have to remove the trans to do a crank R&R.

@dinnuwicaksono 3 жыл бұрын

I have Honda CB250 once and a guy pry the rotor case to split it from crankcase, it ruin the flat surface and leave deep marks. and I have to deal with oil leak forever until I decide to sell the bike. hope your cases flat surface join still good and doesn't faced problem like me 🍻

@mxgryan 3 жыл бұрын

I know the limits for sure. This bike is stilling running great. No leaks!

@whoisadam944 5 жыл бұрын

Nicely done

@mxgryan 5 жыл бұрын

Thanks Adam!

@Livinator-liv6 5 ай бұрын

What case splitter did you use?

@mxgryan 5 ай бұрын

That's a motion pro

@larrybasinskl2752 6 жыл бұрын

Are you using a JIS bit?

@mxgryan 6 жыл бұрын

Larry Basinskl what is a JIS bit?

@larrybasinskl2752 6 жыл бұрын

I can't put a link on here, but you should google JIS bits for working on japanese motorcycles. Look for the article on webbikeworld. You will be amazed at the difference!

@mxgryan 6 жыл бұрын

Ahhh! I did some googling on them. I could see where those could help alot, especially when working on other models that have more Phillips style heads like the TTRs...it can be tough to find a driver that fits well. I appreciate the tip Larry!

@2stplace 5 жыл бұрын

Thank you for taking the time to share this video!! I bought a yz250 and it blew up second ride. Fast forward a month, I bought all the fancy tools (Case splitter, flywheel puller, blah blah blah) now im jumping in head first. I’m very mechanical when it comes to cars. (Motor swaps, turbo systems, blah blah) however not much experience when it comes to splitting cases. I couldn’t bare the thought of paying someone to do it every time (I beat on my machines lol). Anyways thanks again for the video and I was wondering what’s the best way to contact you for some quick tips or things I should be mindful of as I embark on this journey. :)