Tutorial for DIY Line Print Table

Рет қаралды 153,944

Күн бұрын

Here's how I made my 6 platen line table for screenprinting. See my post for more details: www.shellycreatesit.com/blogs...
0:00 Intro
0:08 Where to find Platen plans
0:15 Cost & Supply list
0:38 Steps
0:55 B-Roll of Line Table
1:09 Platen sizes
1:30 Registration on Platens
1:48 Where to place brackets for support on platens
2:00 More B-Roll & Closeups
2:40 Screen alignment preview
2:45 Placing Negatives for burning
3:00 Timelapse for negative alignment
3:27 Ending
Table inspiration by OneTrickPony: www.t-shirtforums.com/screen-...
❓
WANT TO LEARN MORE?
- Join the creative club: t2m.io/zd51m1MX
- Skillshare(Get 2 months of premium free) www.skillshare.com/r/profile/...
My courses: Screenprint Supplies: skl.sh/2xQHaXb
Screenprint Setup: COMING SOON!
Screenprint Storage: COMING SOON!
- Udemy: COMING SOON!
🛒
SHOP MY PRODCUTS:
- Website: www.shellycreatesit.com
- Design Bundles: designbundles.net/shelly-crea...
🔠- Font Bundles: fontbundles.net/shelly-create...
⌨
MY PROGRAMS & TECH:
- Design Software from Adobe Creative Cloud: clk.tradedoubler.com/click?p=...
- Silhouette Cameo Supplies: kit.co/michellebkolo/silhouet...
🔠- Font Creating Software for Illustrator (10% off with this link) fontself.refr.cc/kolodziejczykk
🖨- HP INSTANT INK: (get 1 month free!) try.hpinstantink.com/jpR2z
Look at FAQ's to see if your printer is eligible: store.hp.com/us/en/cv/instant...
🤑- www.shopify.com
📷- Photo & Video Gear: kit.co/michellebkolo/photo-vi...
- Grammarly: I’m a horrible speller! www.tkqlhce.com/click-9118116...
👕
SCREENPRINTING INFO:
- DIY home screen print PDF for Supplies: bit.ly/2YKYDLG
- DIY Line table supplies: kit.co/michellebkolo/screen-p...
- DIY Screen Burning Supplies: kit.co/michellebkolo/screen-b...
- DIY Wood Silk Screen Supplies: kit.co/michellebkolo/supplies...
- DIY Filtration System Supplies: kit.co/michellebkolo/screen-p...
- My water based ink supplies: kit.co/michellebkolo/water-ba...
- Favorite Blanks to print on: kit.co/michellebkolo/screen-p... OR www.shirtsinbulk.com/?affilia...
♥️
WHERE I GET DIGITAL RESOURCES & INSPO:
- Design Cuts: www.designcuts.com/?ref=miche...
- Master Bundles: masterbundles.com/?affiliates...
- The Hungry JPEG: shareasale.com/r.cfm?b=707299...
- Craft Bundles: shareasale.com/r.cfm?b=124367...
💬
CONNECT WITH ME:
- Behance: www.behance.net/michellkolodzi1
- IG / shellycreatesit
- IG / shellycreatesit_digital
- FB: / shellycreatesit
- EMAIL: shellycreatesit@gmail.com
🎶 Music: Stay With Me
by Valesco
soundcloud.com/valesco1
*Please note that some of the links are affiliate links and I do receive a small commission from products and subscriptions purchased. Thank you for your support! 🤗

Пікірлер: 90

@peoplecallmepeechez 7 ай бұрын

Having done all my screen printing in tshirt shops, using a carousel press, its always so fun to see the plethora of ways people can print with the screens. I remeber the first time i saw a video of someone blew my mind how simple it can be

@ShellyCreatesIt 6 ай бұрын

Yes!! It really is amazing. It took me a while to wrap my mind around it too.

@alexa__bliss8040 5 жыл бұрын

Shelly I'm proud to say that you might have the best diy screen press table video on the tube!!! Thanks so much for the video and thanks for responding KIRK :)

@ShellyCreatesIt 5 жыл бұрын

Thank you for the comment! I'm glad it was helpful!

@mwredfern 13 күн бұрын

To add speed and accuracy, I would have 2 posts for the screen to hook to. 😊

@ShellyCreatesIt 12 күн бұрын

Love that idea! Leaves no space for errors too.

@yourunclesam6780 4 жыл бұрын

Wondeful desciption.thanks

@ShellyCreatesIt 4 жыл бұрын

Thanks and welcome

@kavijoe 5 жыл бұрын

Hi Shelley! Thank you for sharing your video. Very helpful!

@ShellyCreatesIt 5 жыл бұрын

Thank you!

@yosefsablon Жыл бұрын

Thank you for sharing your video. God bless

@ShellyCreatesIt 6 ай бұрын

Thanks for watching and commenting :)

@yemarican 2 ай бұрын

Thank you very much.

@ShellyCreatesIt 2 ай бұрын

You're welcome

@maschineneschi8834 Жыл бұрын

Ich suche schon lange nach so einen Tisch. 😊😊

@ShellyCreatesIt Жыл бұрын

Eindrucksvoll! Schön, dass Sie etwas Hilfreiches gefunden haben. Awesome! Glad you found something helpful.

@mac222 3 жыл бұрын

Thanks

@chobrima 4 жыл бұрын

Nice! keep sharing - spread the love - new friend here 🤗

@ShellyCreatesIt 4 жыл бұрын

Thanks for visiting

@New2RC86 9 ай бұрын

Amazing

@ShellyCreatesIt 6 ай бұрын

Thank you!

@joeystyles8128 2 жыл бұрын

Thank you

@ShellyCreatesIt 2 жыл бұрын

You're welcome!

@nightshifthoops 5 жыл бұрын

Thanks for this! How do you make the notches so percise in the wood? What did you use to cut it

@ShellyCreatesIt 4 жыл бұрын

My husband did it with a router. We measured each piece (because the sizes of the wood vary slightly) and cut out the same size notch for each location.

@BharathiBharathi-yr2ss 5 жыл бұрын

Good job

@ShellyCreatesIt 5 жыл бұрын

Thank you!

@t-giandgaspito3791 4 жыл бұрын

Very good

@ShellyCreatesIt 4 жыл бұрын

Thanks

@floomhoodertribez5030 3 жыл бұрын

Nice tutorial new friend here..stay safe..

@ShellyCreatesIt 3 жыл бұрын

Thanks for watching! Stay safe as well!

@rence822 5 жыл бұрын

great job, i see the top dowel, but how do you keep the screen from moving from side to side

@ShellyCreatesIt 4 жыл бұрын

The screen is flush against the middle bar, therefore does not move from side to side.

@mheetu3909 3 жыл бұрын

@@ShellyCreatesIt How well does it handle multi-color prints? I'd think the wood on each frame would be slightly different so that system would be off a bit without some sort of flexibility for micro registrations/adjustments. I think a 2-peg system with the screens calibrated to the exact same positioning using adjustable brackets would render better results.

@ShellyCreatesIt 3 жыл бұрын

I align the screens to the design and burn the transparencies, therefore the screen discrepancies don't effect the alignment. I can understand the difficulties.

@mightyquinn5135 4 жыл бұрын

Can you do a more detailed video on how to register multiple colors with this system. Im still confused

@ShellyCreatesIt 4 жыл бұрын

Sure! I'd be glad to. :D thanks for asking

@METALSKINMETAL 3 жыл бұрын

Curious, would you be able to use standard 24x20 aluminum frames with this system?

@ShellyCreatesIt 2 жыл бұрын

Great question! I should get an aluminum frame and try it! I would say, 'yes.' Make sure your platens and spacing between them fit the 24x20 frame size. For alignment, (if you don't want to drill into the metal frame) you can put all the alignment on the center bar. Maybe have 2 brackets or bolts that the screen fits between and sits flush against the middle bar. It doesn't allow for micro registration, but if every platen is square and the screens align the same way, and you burn the screens correctly - you won't need micro registration.

@aclassic5087 5 жыл бұрын

Hi Shelley, just wondering if the 2x2 holds up to the pressure of the putting the ink onto the shirt with the screen when pressing? Thank you.

@ShellyCreatesIt 5 жыл бұрын

The 2x2 seem to hold up well. There isn't a lot of pressure when I print because I don't want the ink to bleed through the tee. I also placed at least 3 to 4 l brackets under each platen to hold the 2x2 to the platen. So far it seems sturdy enough and I've been using for nearly 10 months.

@lukereeby8566 5 жыл бұрын

@@ShellyCreatesIt ARe you using mostly plastisol? love the design will give it a go if it can halde pressure using waterbased

@ShellyCreatesIt 5 жыл бұрын

@@lukereeby8566 I am mainly using water based. Not sure when... or if I'll move to plastisol inks.

@ShellyCreatesIt 5 жыл бұрын

I'm in the same situation. Love the waterbased inks, but I'm doing a jersey order now where I am having to try plastisol. Fingers crossed it works. It is definitely different than water based!

@Imperialprince1018 5 ай бұрын

Hey Shelly I have a question. On you diy line table did you add a micro registration for multi color and if so how do I do it as well?

@ShellyCreatesIt 5 ай бұрын

I attempted to with bolts in the middle bar. But it would typically work as long as my films were burned correctly, the screens would always line up. i just had to make sure my shirts were squared off. Here are some examples: kzfaq.info/get/bejne/bJxhhNqdptOvcqc.html and kzfaq.info/get/bejne/Zrx9asVi3p-dnHU.html kzfaq.info/get/bejne/hJaSdbBl2Z3VlmQ.html

@stevennoynay5698 5 жыл бұрын

Hi can you include in the description the layout i cant print the layout. thanks.

@ShellyCreatesIt 4 жыл бұрын

There is a link in the description to access the plans. Also another user has shared a google drive link here: drive.google.com/file/d/1svIjeXDLm8PO-IrFzdY8innI5jGaexWR/view?usp=drivesdk

@prodby7anaka 4 ай бұрын

hello thanks for the video, cant seem to see the plans could you kindly assist

@ShellyCreatesIt 3 ай бұрын

Here are the plans that I found on the t-shirt forum. drive.google.com/file/d/1svIjeXDLm8PO-IrFzdY8innI5jGaexWR/view?usp=drivesdk The full discussion is here: www.t-shirtforums.com/threads/d-i-y-line-table-and-screen-stretcher.359930/

@krunpurnell5829 5 жыл бұрын

Where did you get the center bolts from

@ShellyCreatesIt 5 жыл бұрын

You can view my screenprint table Kit here to find the dowel rod used for the center peg. kit.com/michellebkolo/line-table-supplies/3-16-dowel-rod-nail It's a 3/16 in dowel rod that we cut into 3 in sections and glued into the center 2x2 board. We also sanded/rounded the top to make the t-bracket easy to slide on and off.

@JanetteGailFrancis 4 жыл бұрын

Your link to the "discussion" forum with the alleged "plan" only has a very small thumbnail image, not the full jpg

@LuisCasstle 4 жыл бұрын

It's there, click on it. Or left-click and save as. That's the easy part, good luck with the build.

@ShellyCreatesIt 4 жыл бұрын

You can create an account and it will give you full access. Another user has also shared the link to google drive copy: drive.google.com/file/d/1svIjeXDLm8PO-IrFzdY8innI5jGaexWR/view?usp=drivesdk

@jmags03 3 жыл бұрын

May i ask what size of Screen Frame do you use? TIA...

@ShellyCreatesIt 3 жыл бұрын

I have three speedball screens that are 13.5" tall x 9.5" wide, and four homemade sizes: (H x W) 9.5" x 7.5" 11.5" x 9" 16" x 9"

@armanahmed3643 11 ай бұрын

Good

@ShellyCreatesIt 11 ай бұрын

Thanks!

@faustoramirez1884 2 жыл бұрын

Hey what type of ink do you use

@ShellyCreatesIt 2 жыл бұрын

I use Speedball water based ink. kit.co/michellebkolo/water-based-ink-for-screen-printing

@mightyquinn5135 4 жыл бұрын

So i guessyou attach a bracket to each.screen

@ShellyCreatesIt 4 жыл бұрын

Yes, I attached each T-Brace to each screen. The 'L' corner bracket is used in the middle of the table for alignment.

@kevoncarter750 Жыл бұрын

what did you use to cut the notches in the wood?

@ShellyCreatesIt Жыл бұрын

We used chisel and hammer to notch it out. You could probably use a saw or a router to get the bulk and clean it up with chisel and sandpaper.

@kevoncarter750 Жыл бұрын

@@ShellyCreatesIt I also was having a hard time trying to find the pdf on how to build it. I seen the link but I didnt where to download the file at

@ronaldsison4847 4 жыл бұрын

Do you have the link for the print out?

@ShellyCreatesIt 4 жыл бұрын

Yes, It is in the description. Also, another user shared this link: drive.google.com/file/d/1svIjeXDLm8PO-IrFzdY8innI5jGaexWR/view?usp=drivesdk

@gamesdropby6076 2 жыл бұрын

Hi shelly. This is so nice. Btw what is the size of you screen?

@ShellyCreatesIt Жыл бұрын

I somehow missed your question! Thanks for asking, I have three speedball screens that are 13.5" tall x 9.5" wide, and four homemade sizes: (H x W) 9.5" x 7.5" 11.5" x 9" 16" x 9"

@guetyjoseph1567 5 жыл бұрын

Thanks a lot a lot Shelly.. i wanna talk To you ? How can i join you.. i have a table like this. How do you manage off contact..???

@ShellyCreatesIt 5 жыл бұрын

You can comment back/forth here, or you can email at: shellycreatesit@gmail.com I have only used water-based ink up until this past week, and haven't needed to have off-contact. I am currently printing a jersey order with Wilflex Poly White and I'm finding that I need the off contact. There was another comment on my channel suggesting placing a washer on the dowel rod(registration) in the middle of the table, but I'm concerned about it affecting my alignment/registration. I think I might superglue some washers on the print side of my screen, but the only concern would be the next time I go to burn the screen, will the washers affect my off contact?

@zoomsday3999 4 жыл бұрын

They say u can use washers or tape quarters to the corners

@arnabdeb1541 5 жыл бұрын

Nice plan, but where to get the T thing (kzfaq.info/get/bejne/fLFdp8mhq7vRhoE.html), that you have attached on your frame, which goes down in a pin?

@ShellyCreatesIt 5 жыл бұрын

Thank you. I place a 3 in x 3 in Zinc-plated T-Plate by Everbilt on each of my screens to place over the pin. I purchased at Home Depot. www.homedepot.com/p/Everbilt-3-in-x-3-in-Zinc-Plated-T-Plate-2-Pack-15169/202033997

@ericsimbulan7248 3 жыл бұрын

Where is the link can i have the drawing plan and dimension pls! Thanks!

@ShellyCreatesIt 3 жыл бұрын

It is in the description. Also, another user commented and shared this link: drive.google.com/file/d/1svIjeXDLm8PO-IrFzdY8innI5jGaexWR/view?usp=drivesdk

@itsamgraphics 3 жыл бұрын

Hi! The website link does not work. Are you still in business?

@ShellyCreatesIt 3 жыл бұрын

Here's my temporary website: shopshellycreatesit.com/ I was playing domain & messed things up! Should have previous (shellycreatesit.com) up and running by August 20th, 2021! Thanks for understanding!

@itsamgraphics 3 жыл бұрын

@@ShellyCreatesIt thank you for the update