No video
TWIN TURBO FAB AND 4TH GEN 48RE TRANS SWAP
Рет қаралды 11,188
3 жыл бұрынWebsite: shop.firepunk....
Facebook: / firepunkdiesel
Instagram: / firepunkdiesel
@wetplanet268 3 жыл бұрын
the work you guys put in to these videos! my favorite tv show of 2020!
@austinkmullins 3 жыл бұрын
Please don’t ever stop making these vids, you guys are awesome!
@mattwood9981 3 жыл бұрын
Keep rolling Firepunk, you're knocking on the door of 30k subs!! Hell yeah!!
@klev2008 3 жыл бұрын
This channel is so under rated, love watching your videos
@Jon06IX 3 жыл бұрын
You need a JGS drive pressure filter after the coil.
@jaythacker5160 3 жыл бұрын
Hey Lavon, tell them young whipper snappers how it is! LOL I used a butt load of tubing for drive p guages too.
@cpoosch 3 жыл бұрын
Landon, get your confidence! You got this. Now where's Larson?!? 😁😁
@crohnsn2446 8 ай бұрын
Do all of the 6.7 cranks have a lip on the crank that have to be ground off before you’re able to bolt up the flex plate?
@isaiahlunsford6373 3 жыл бұрын
Good sound track
@mikestrucks 3 жыл бұрын
Nice video as usual 👍🏻
@foxxx5.941 3 жыл бұрын
I been thinking about the 1 piece drive shaft. What is the +s to it besides no more carrier bearing. Love the videos I could watch what u guys do all day
@foxxx5.941 3 жыл бұрын
I see u answered this question a lil further down.
@drake_24v_hawkins 3 жыл бұрын
What kind of gains have you guys experienced in an 06 5.9 with a stealth 64 drop in, on a stock manifold.. is it worth buying an aftermarket manifold?
@FirepunkDiesel 3 жыл бұрын
The aftermarket manifold ads about 5 Peak horsepower but it picks up about 70 foot pounds of torque around 2000 RPM. it's minimal gains but there are definitely gains
@drake_24v_hawkins 3 жыл бұрын
@@FirepunkDiesel thanks for the info, any budget friendly manifolds you guys like?
@FirepunkDiesel 3 жыл бұрын
Id buy steedspeed 3rd Gen and if it's not in your budget then run the stocker
@foxxx5.941 3 жыл бұрын
@@FirepunkDiesel doesn't it help with egts. I'm in the same boat I'm going to b doing a turbo over the winter probably a 369 and was planning a manifold but if there really no difference
@drake_24v_hawkins 3 жыл бұрын
@@FirepunkDiesel wanting to do studs a liftpump, and a sump first. Trying to prioritize mods! So I think I'll slap the turbo on and run the stocker for now!
@firstgeneralee2105 3 жыл бұрын
What’s the benefit to having the one piece aluminum driveshaft?
@FirepunkDiesel 3 жыл бұрын
No carrier bearing and one less ujoint to fail, when done correctly the one price aluminum shaft is smoother at highway speeds
@isaiahlunsford6373 3 жыл бұрын
Firepunk Diesel. Do you all make the one piece aluminum driveshafts in shop or do you order them
@FirepunkDiesel 3 жыл бұрын
We use Columbus Joint and clutch
@bagged1998 3 жыл бұрын
What yall think about the new aurora vgt turbos?
@FirepunkDiesel 3 жыл бұрын
I haven't used them yet, so I don't have an honest opinion.
@Cacciatore7267 3 жыл бұрын
What drive pressure sensors do you guys use?
@ryankovaly3927 3 жыл бұрын
Al Ferrante isspro in my opinion are your best option. Great customer service, and products are easy to install. I’m running 3 of their easy vision 2 gauges on my 4th gen and 5 of their easy vision 2 gauges on my 05. Have no complaints about them at all
@FirepunkDiesel 3 жыл бұрын
This was an AEM datalogger setup
@dodgedude66 3 жыл бұрын
Lavon! Where's the 5th Gen updates?!
@FirepunkDiesel 3 жыл бұрын
coming, waiting on latest oil analysis info
@bigdreamsonsmallacres 3 жыл бұрын
Cody, never admit you are wrong. Deflect and tell Lavon he’s mad because you have hair 🤷🏼♂️
Firepunk Diesel
Рет қаралды 49 М.
Fabiosa Best Lifehacks
Рет қаралды 17 МЛН
Firepunk Diesel
Рет қаралды 16 М.