Two Seat Crosskart Build #1
Рет қаралды 318,432
2 жыл бұрынYou've asked and here is the delivery. A two seat CrossKart that captures the compact big power of the single seaters, but still gives the room you want with a length that can be customized. New build methods make the chassis come together quickly and easily. Enjoy fabricating a fun machine in your garage and post your progress pictures on the Facebook group listed below.
Enjoy the build!
-Kyle
Plans available here:
kj-raycing.dpdcart.com
Facebook KJ Raycing
Once you have the plans come join the build discussion
Facebook Build Group (KJ Raycing VF-1 and VF-2 Kart Builders) / 905565813954510
Instagram @kjraycing
RogueFab
www.roguefab.com/
DISCLAIMER
Videos are for entertainment only, work performed in the video should only be accomplished by a professional technician. KJ Raycing will not be held liable for ANY personal injuries.
@jesse1136 2 жыл бұрын
I appreciate all the builders/fabricators/machinists/engineers who not only leave their mistakes in their videos, but especially those who highlight them. It doesn't matter if you've done something 100 times, mistakes happen and it's not motivating or inspiring to watch content where the goof-ups are edited out. I don't speak for anyone in your audience but myself, but I find it's easier to follow along and connect with people who aren't afraid of being imperfect. I'm dying to get started on my cross kart and my kids will be stoked for a 2 seater.
@KJRaycing 2 жыл бұрын
If we never make mistakes how can we learn from them. It was an easy fix anyway, I was just so excited to get that two seater frame together! This is going to be a fun one! I can’t wait to see everyone’s builds and I can’t wait to take my little girl for a squealing ride! Thank you for the compliment.
@Arie426 Ай бұрын
Pengalaman dan belajar dari kesalahan adalah guru yang sebenarnya,jangan takut salah karena dari kesalahan itu kita bisa menjadi lebih baik,tetaplah tersenyum 😊
@SoBoring136 Жыл бұрын
I appreciate your doing all you can to make this a option for people with no fabrication skills, nice job.
@KJRaycing Жыл бұрын
Thank you very much, that means a lot because it’s exactly what I’m trying to do.
@phoenixfab6853 Жыл бұрын
Nope
@kennyh5083 4 ай бұрын
Absolutely! a two seater is the ONLY way to go! Now install a 4-cylinder auto engine and transmission and then it will be right!
@vintagetweed 2 жыл бұрын
Really looking forward to this. Fantastic fab work. Love to see the preparation taken. Cross kart has been a dream build for years. Very cool.
@KJRaycing 2 жыл бұрын
Thank you so much. I’ve had crosskarts on the brain since 2004 when I first saw them. It is so cool that not only did I get to design and build one; I get to step into a new two seat form of crosskarting 🤓
@dougjohnson6265 2 жыл бұрын
Can't wait for the next video Kyle...as always your work is great...I enjoy every minute of your builds
@KJRaycing 2 жыл бұрын
Thank you very much. I get a ton of motivation from comments like this.
@seandye658 Жыл бұрын
This is incredible information. Thank you so much
@WillysRubicon 2 жыл бұрын
Exactly what I have been hoping to see soon! I will be buying these plans for sure. Thanks!
@KJRaycing 2 жыл бұрын
This is going to be a good one!
@WillysRubicon 2 жыл бұрын
@@KJRaycing what are you going to use for a donor engine on this one? I have been thinking a large selectable 4wd 4wheeler would be awesome. Like a Honda 520 electric shift. Not as fun but practical
@KJMcLaws 2 жыл бұрын
I'm so excited. I want to make one for me an my wife
@LuisDiaz-kg1fy 2 жыл бұрын
Hell yeah is going to come out dope bro!!!!!!!!!
@williamlanphar630 2 жыл бұрын
This looks great Kyle ! I cut up 2 of the 1 1/2 " tube sections today before the rains came. I have sent all 11 of my clamp blocks out to Rogue Fab to have the indexing marks engraved . So far everything is going smoothly.
@KJRaycing 2 жыл бұрын
I heard about Rogue doing some exchanges for the guys who just bought their setup. Man they are awesome guys! It is so fun to get started on a new build, right?
@williamlanphar630 2 жыл бұрын
Absolutely ! It is definitely quite exilerating !
@tjben49 2 жыл бұрын
So excited to see this one!
@vintagetintrader1062 2 жыл бұрын
Been waiting for this, I’ve been building a single seat buggy (Edge) but I keep holding off working on it as I really need a 2 seater to take the kids.
@KJRaycing 2 жыл бұрын
There are going to be a lot of happy kids when we get these built!
@movingkartcross9221 2 жыл бұрын
Top Parabéns...muito legal Bom processo de fabricação
@KJRaycing 2 жыл бұрын
Thank you very much.
@gonracn 2 жыл бұрын
Been waiting for this!
@JacobSherwood 2 жыл бұрын
Killin it my man!🔥
@KJRaycing 2 жыл бұрын
Thank you!
@stephenhall9620 2 жыл бұрын
cool build!
@KJRaycing 2 жыл бұрын
Thanks man!
@wogelkrafts 2 жыл бұрын
Damn Kyle! Very impressive work! Making it look super easy! :D Keep doing what you do! ;)
@KJRaycing 2 жыл бұрын
Thank you. So many of these are being built it has to be a little on the easy side and not just me 😁.
@kontrakgaming4107 Жыл бұрын
Subscribed!!
@cleilson6316 Жыл бұрын
Ganhou inscrito. Saudações aqui do Brasil.
@ghassanalniser3261 2 жыл бұрын
Perfect measurements
@KJRaycing 2 жыл бұрын
Can’t wait for this one to come together!
@thomascrowe3407 Жыл бұрын
Motorcycle or electric driven formula one karts would be a cool weekend toys as well.
@KJRaycing Жыл бұрын
Well I have a VF-1 and a VF-2, there are plenty more numbers to use and designs on the way 🤓
@ltsky311 Жыл бұрын
I have found using a chalk line can work well for marking centerline if you dont' have long straight metal.
@epicvids724 Жыл бұрын
I finished the go kart and its amazing, its super fast i have a yamaha 750 motor in it
@KJRaycing Жыл бұрын
Let’s see some vids, man! Congratulations. 👍
@kevkev5935 7 ай бұрын
This is amazing. I've been wanting to do a build like this as a project with my 9 year old for a while. Do you source your stock from places online or mostly locally?
@franciscowashington2155 Жыл бұрын
Beleza muito bom 👍👍👍😎
@matthewjackson9765 2 жыл бұрын
Be interested to see how the footbox area works out. Be nice to power that with a liter bike engine!
@KJRaycing 2 жыл бұрын
It’s all planned and measured. I double checked it before releasing the plans…
@dakotaford6401 2 жыл бұрын
Keep posting videos man!! This is the first channel I check when I log into KZfaq now! I’ve watched all your videos and now I’m about to spend a bunch of money building one of these. A question before I buy your plans I’m a tall person (6’3”) what pipes should I extend? And by how much? Or would the plans be fine for me?
@KJRaycing 2 жыл бұрын
Man that is really cool to hear and thank you. The details are in the plans of exactly which pieces to extend. I cover it in the two seater videos although I didn’t stretch this one. It is very similar to the single seat stretch process I did for the budget build if you want more of a walkthrough.
@epicvids724 Жыл бұрын
im gonna build this
@KJRaycing Жыл бұрын
Heck yeah man!
@stevenbeebe5419 3 ай бұрын
Want to see the two seater in the sand
@stevenpleasant5834 2 жыл бұрын
Hi Sir very nice I like both Crosskarts but this is better and real cool I will be watching as I do all of your videos keep the great build up just would like to ask being you are building this new two seat crosskart have you had thoughts on building one with 4x4 set up that would be really the coolest yet and guy in woods trails would like to have onein a 4x4 set up it would not be that hard to do just use 4x4 spindles and differentials for a Quad hope maybe you might build one some day.
@KJRaycing 2 жыл бұрын
Thank you! I left some room open in the front for a differential setup, but honestly 4wd is not really my thing. I really love the feel and challenge of 2wd. And I love how simple and inexpensive it is too. More moving parts means more stuff to fix. I look for busted up inexpensive utility quads that could handle the power of a 4 cylinder, but I haven’t found a cheap donor yet… thanks again!
@DarriusAnderson 2 жыл бұрын
We need to talk lol 🔥
@mailsonilson2649 Жыл бұрын
our very great top.. very good your work as do I get the measure or the porthow do I buy
@davessparetime83 2 жыл бұрын
A two seater single rear wheel autocycle (reverse Trike) would be a good option for a next build. Street driven, lower ride height.
@KJRaycing 2 жыл бұрын
Next build is already decided… it has four wheels but is not a kart. 😁
@100musicplaylists3 Жыл бұрын
Make a two person cycle version with fold down seats that turn into a camp bed!!!
@septa814 Жыл бұрын
Mantap bang 👍👍👍👍
@septa814 Жыл бұрын
👍👍👍👍
@reinhardkastner5488 Жыл бұрын
Hy Dude, I appreciate your work, but I have one question, wich designing programm are you using
@metalgt6828 2 жыл бұрын
This is awesome! I've been wanting a crosskart for so long, but I'd love one of my boy's to ride around with me too!! Too bad I don't know how to weld lol... you don't live in NC by any chance do ya? lol...
@KJRaycing 2 жыл бұрын
I don’t live near NC, sorry. I use a pretty simple welder and learning to weld this stuff isn’t too hard. It is the perfect thickness of metal to weld everything easily with a simple mig setup. I use a Lincoln 140HD that just uses a normal house outlet and my welds come out strong.
@patrickveal5435 2 жыл бұрын
Best thing you could do is grab some scrap, buy a welder and have at it. You'll notice changes in your ability with nearly every pass.
@alonsorivas7244 2 жыл бұрын
Heck yeah awesome finally the 2 seater 🙌🏼 when will the plans be available?
@KJRaycing 2 жыл бұрын
Thank you! I’ve been working on these plans for a while, so when the frame came off the jig I was super excited to say the least. Plans are available right now 👍
@mdd0204 2 ай бұрын
Do the plans come also in Metric system ? will be happy to have them in Meter/centimeters
@thethrillofitall Жыл бұрын
This, is exactly what I've been looking for. Thx so much! Awesome channel! New to your channel, not sure if you mentioned the brand or type, but what bender is that?
@KJRaycing Жыл бұрын
So glad you found it! This whole channel and the plans were started just for the fans of my hobby. It is a RogueFab bender, they have a KJ Raycing package on their site to make it easy for guys to get started. Thank you so much for tuning in!
@thethrillofitall Жыл бұрын
@@KJRaycing thx KJ!
@mailsonilson2649 Жыл бұрын
muito top... tem como mandar para mim as medida e a planta
@alexarujo898 10 ай бұрын
Vc vende o projeto desse mini buggy
@robertvicks9139 2 жыл бұрын
🔥💯
@barracudalife7720 5 ай бұрын
Hello I purchased your plans and I don’t understand the outer diameter of the pipe tell me please
@juanmachado3296 2 жыл бұрын
Good work!!! What brand and model is your tube bender?
@KJRaycing 2 жыл бұрын
It is a Rogue Fab M600. The updated version is the M601. Rogue is an awesome company for sure, definitely check em out!
@giuliano3963 2 жыл бұрын
Looks great! How much space is available for the engine? I'm thinking on using a 1.3 honda jazz engine
@KJRaycing 2 жыл бұрын
Well there is as much space as you need. But the space used for the motor will take away from room for the driver... You may want to consider stretching the chassis and using all .120 tubing if you are going to use a car engine. It will end up being heavier which means more expensive shocks, hubs and driveline. There is a reason these karts are so fast and fun and that is because they are EXTREMELY light and nimble. Good luck, I hope it works out for you.
@giuliano3963 2 жыл бұрын
@@KJRaycing thanks for the detailed answer! I'll try to find a motorcycle engine then!
@saintlouisstevenson5674 Жыл бұрын
🤩😀
@TravisAnderson-zw1pd Ай бұрын
Should have made made it like a fighter jet seating one behind the other
@Buildit4u 2 жыл бұрын
Such an awesome build, Also too poor to buy the plans😅
@KJRaycing Жыл бұрын
Thank you. The plans are the least expensive part of this build. I hope you can figure out a way 👍
@lamborghini9651 4 ай бұрын
qué programa usaste para el diseño??
@clesimparreira553 Жыл бұрын
Parabéns pelo seu projeto ,como consigo seu projeto ?
@KJRaycing Жыл бұрын
Check the description for details 👍
@rubemxavier3616 7 ай бұрын
Onde eu encontro o projeto com as medidas para a confecção da gaiola
@henryp1974 Жыл бұрын
Hey there I was wondering if there is a specific thickness on the square tubing for your jig
@KJRaycing Жыл бұрын
The square tubing is not structural, so I get the least expensive at the time. I’ve used .065 to .095 and maybe even .120. Get a price check on all of them.
@Alex-zd1jd 11 ай бұрын
What size tubing do you use?
@austinmurphy1111 2 ай бұрын
How much does one of these cost after it’s built ?
@robtomberg2393 9 ай бұрын
Thanks for you videos!! Are the plans also in metric? Gr from the Netherlands
@KJRaycing 9 ай бұрын
Plans are not metric but lots of guys have just converted the numbers for their builds. It doesn’t take too long and it’s totally worth it. Good luck 👍
@robtomberg2393 9 ай бұрын
@@KJRaycing thanks for the reply! I'm Just shy of 6 foot 6 inches.. how much do you think i have to ad to the measurements? Planning to do a aprilia rsv mille engine
@KJRaycing 9 ай бұрын
I would definitely get the VF-1 XL. I designed it just for you 👍. That rsv is going to be awesome!!!
@ApocGuy 3 ай бұрын
how hard it would be to modify VF2 so i could use car engine? i'd gladly take 600+ cc bike engine, but where i live even 20 years old are well above 1K €€...
@markojandric4888 Жыл бұрын
Where did you buy plan for making chassis and what differential do you use? Thanks
@KJRaycing Жыл бұрын
Check the description and continue watching the build series 👍
@humperdinckoglethorpe4180 Жыл бұрын
Is there a cheaper alternative you would recommend for a tube bender?
@KJRaycing Жыл бұрын
Sorry, I only know Rogue Fab. I wish this stuff could be less expensive but it’s not. This is the most inexpensive way to build a safe high performance machine.
@digger_jon2778 9 ай бұрын
I'm friends with the owner Joey from rogue fabrication how cool
@Watthead80 3 ай бұрын
Cool story..you should write a book.
@SpoiledBread24 Жыл бұрын
How many mph slower does this 2 seat version go compared to the 1 seater? and how much more does it weigh?
@KJRaycing Жыл бұрын
The chassis weighs about 50 pounds more. Added weight of passenger seat and passenger vary. Speed is however you gear it 👍
@sembiringsembiringmilala9050 2 жыл бұрын
Bacrit Mr Love
@shadetreerestorations9053 4 ай бұрын
does your plans you sell incude the Jig plans?
@KJRaycing 4 ай бұрын
Yes they do! It’s a very important part!
@sderrsdgfyiaedefg2683 Жыл бұрын
having that grinder with no shield on it is some risky business dude
@KJRaycing Жыл бұрын
I grind like there is no shield on it. Kind of like when you ride a dirt bike without a helmet…
@diyabbulukgiray6902 Жыл бұрын
hi, where can i find the dimensions of the car?
@garyadkins9494 6 ай бұрын
Could I adapt a 800 triumph motorcycle motor to a build like this
@KJRaycing 6 ай бұрын
Yes 👍
@kevinheiden6178 2 жыл бұрын
Where do you get the tubing for these builds?
@KJRaycing 2 жыл бұрын
I buy locally. Metal supermarkets is a great place with stores nationwide. It is always less expensive than buying online.
@safwan096 2 жыл бұрын
what type of pipe are you using for the body?
@KJRaycing 2 жыл бұрын
1.5” and 1.25” Dom tubing for the frame.
@josearmandojolianizgonzale1185 3 ай бұрын
Puedes compartir los planos estoy interesado gracias
@KJRaycing 3 ай бұрын
Kj-raycing.dpdcart.com
@cesarsalvatierrachuve3090 Жыл бұрын
Ok
@bryanflor9527 4 ай бұрын
Puedes compartir los planos
@KJRaycing 4 ай бұрын
Kj-raycing.dpdcart.com
@SpoiledBread24 Жыл бұрын
Do you have a parts list like the VF-1?
@KJRaycing Жыл бұрын
A lot of guys are using the VF-1 parts list. I used all the same stuff.
@jackferguson2491 4 ай бұрын
How much does the frame weigh for the xl
@KJRaycing 4 ай бұрын
About 120 pounds I’m guessing.
@dakillaklown715 3 ай бұрын
Got a build for square tubing?
@KJRaycing 3 ай бұрын
Obviously not 😁
@sinsinsss5216 Жыл бұрын
Seperti ini nek pinter wes metu iso dadi shae jumlahe melimpah.
@KJRaycing Жыл бұрын
Not doing it for the money; I already have a job. My intentions are to help like-minded home fabricators create something they’ve always dreamed of.
@lutherwhitmire3982 2 жыл бұрын
I HAVE Been Wanting To Build A 4WHEEL DRIVE Go- kart FOR A WHILE NOW. I JUST NEED Some FREE PLANS. I tHINK I HAVE ENOUGH STEEL. IvaM LOOKING AT TIRES AND ENGINES NOW.
@KJRaycing Жыл бұрын
I would give my plans away, but unfortunately they are not worthless. They are the least expensive part of building one of these though. Good luck!
@cesarsalvatierrachuve3090 Жыл бұрын
Hola soy de bolivia tendrías planos para enviarme
@KJRaycing Жыл бұрын
Check the description 👍
@user-qy8tx9sf1s 3 ай бұрын
Where can I get the plans
@KJRaycing 3 ай бұрын
Kj-raycing.dpdcart.com
@lanceburkhardt8265 Жыл бұрын
Music?
@jayramirez2463 Жыл бұрын
Link to plans?
@KJRaycing Жыл бұрын
Links to everything in the description 👍
@MrBigleo25 11 ай бұрын
Can u build me a frame for two seater not welded out I can finish it out
@KJRaycing 11 ай бұрын
Lots of guys building them, you can too 🦾
@MrBigleo25 11 ай бұрын
@@KJRaycing i bought the plan but i just dont have the room in my house i thought i could its going to be to much plz consider it and let me know
@user-oy4fv4wc1c 10 ай бұрын
would that fit in a truck?
@KJRaycing 10 ай бұрын
It could definitely be built to fit in a truck. Would need to have a long bed though.
@barracudalife7720 5 ай бұрын
please tell me the outer diameter of the pipe? Thank you )
@KJRaycing 5 ай бұрын
It’s in the plans 👍
@barracudalife7720 4 ай бұрын
@@KJRaycing can you give me a 3D model of your buggy? I already bought plans from you need a 3d model
@silvanoloureido7758 Жыл бұрын
where can i buy the plant
@KJRaycing Жыл бұрын
Check the video description for all the details 👍. Enjoy the build 🦾
@johnsilva3350 2 жыл бұрын
How much for a 2 seater frame?
@KJRaycing 2 жыл бұрын
Only $50 for the plans. You’re going to have to get your hands dirty if you want one. You can build this; enjoy the build and the drive 🦾
@jarvislarson6864 8 ай бұрын
I dont understand why you would build a jig in order to build a chassis......you can make mistakes building the jig just as easily on the chassis without it . So is it so you can build multiple chassis and speed up the production?
@KJRaycing 8 ай бұрын
It’s because I’ve built one without a jig. All of this comes from experience. The jig uses 90 degree angles and simple measurements, so it’s actually very hard to make mistakes. The proof is in the success of the guys building these. The hardest part is to start and guys always looking for problems rarely start on anything. I wish you the best 👍
@omerfarukakgun1350 Жыл бұрын
What are the pipe dimensions?
@KJRaycing Жыл бұрын
I don’t use pipe I use tubing. All of the material needed is in the plans. Link to the plans in the description 👍
@SatryoTeg89 9 ай бұрын
iam from indonesia..please send size
@KJRaycing 9 ай бұрын
Kj-raycing.dpdcart.com
@user-sy5ez8et8m 2 жыл бұрын
Hello blogger, I think your go kart is very good. Can you provide me with the drawings? I also want to try to make my own go kart. Thank you!
@KJRaycing 2 жыл бұрын
Thank you. kj-raycing.dpdcart.com
@LOgan-jp5oz 3 ай бұрын
We need instructions
@KJRaycing 3 ай бұрын
Kjraycing.com
@user-xe5jy6sq6j Жыл бұрын
You can buy it back, are you beautiful?🙏😢😔 Can you give it in Cambodia?😔🙏 Are you a Nazarene?😔🙏 You see so beautiful?😔🙏😭
@Watthead80 3 ай бұрын
1000 bucks for a "cheap" bender.😂 Unless you're building a shitload of frames there is no way to justify spending that much on a bender.
@KJRaycing 3 ай бұрын
You can be one of the smart ones that spends $20k on a sxs or $50k on a Sierra car Vs Under $10k with tools to build your own. You got me…
@michaelchristian8220 2 ай бұрын
Jd2 does just fine if you can find one for cheap. I made my own clone personally. The Rouge fab is just less effort and can be more accurate. Either way, comes down to the operator
Quantum Tech HD
Рет қаралды 5 МЛН
Ladi & Margaret
Рет қаралды 286 М.