Uberflex 1/4 Hose vs 3/8 Amazon Gray Hose | Reviewing & Testing

Uberflex 1/4 Hose vs 3/8 Amazon Gray Hose | Reviewing & Testing | Car Wash Tips

Рет қаралды 42,304

Жыл бұрын

I have overlooked the Uberflex 1/4 hose for too long and my viewers have pushed me to try it out and I am glad I did. Enjoy the video and Bloopers at the end.
Follow Me on Instagram - / carswithkeav
Uberflex 1/4 Hose - amzn.to/3IfDG1c
Gray Non Marking 3/8 Hose - amzn.to/3Bytihe
MTM SGS28 - amzn.to/3NJZNAF
McKillans Stainless Kit - amzn.to/3BsFznH
McKillans Nozzle Guard - amzn.to/3IfT5yG
M22 14mm to 3/8 NPT Brass (No O Ring) - amzn.to/3o5zyKu
M22 14mm to 3/8 NPT Stainless (No O ring)- www.pwmall.com/p-210527-04000...
DIY Detail - www.diydetail.com/?rfsn=79604...
Discount Code CARSWITHKEAV for 10% off
Active 2.0 from Active - shop.activeproducts.com/produ...
Active 2.0 from Amazon - Not Available yet
Active Affiliate Link - shop.activeproducts.com?sca_ref=2600661.YNbljSrmHt
Sliplo - HEIDI at or 15% off sliplo.shop/carswithkeav
Gtechniq - Heidi10 for 10% off at gtechniq.com
Blackvue - Heidi10 for 10% off at blackvue.com/ref/Heidi_the_335/
JDCars - KEAV5 5% off at jd-cars.com/?ref=KEAV
Check my Amazon store if you want to buy Gtechniq on Amazon.
Wall Setup:
CR Spotless DIW-20 - amzn.to/3NZk964
Active 2.0 - shop.activeproducts.com/produ...
General Pump hose Reel - amzn.to/3xr3bGM
SGS28 Swivel Spray Gun - amzn.to/3dTuKPh
Pressure Washer Hose - amzn.to/3O1HDYp
Jumper Hose- amzn.to/3I5sdke
3/8 female QD coupler - amzn.to/3xj224e
Flexzilla Hose - amzn.to/3E5eFDP
Gilmour Sprayer - Walmart
Garden Hose Reel - amzn.to/3E686Rt
Brass Garden Hose Angles - amzn.to/3YQ848y
Two way splitter - amzn.to/3xl8yHO
DigiFlow 6710 - amzn.to/3zFsrfa
Amp Meter - amzn.to/3zJtgU4
Greenworks 1700 - Lowes
Union Valve - amzn.to/3jSv2wI
Union Fitting- amzn.to/3E7ZMRs
Pressure Washer Valve - amzn.to/414Fdzc
All PVC piping and fittings - Home Depot
Shelving - Home Depot
Washing Machine - amzn.to/3K7rktU
M22 elbow items:
3/8 stainless elbow - amzn.to/3E55ljg
m22 to 3/8 female -amzn.to/3Xv22Jp
3/8 male plug - amzn.to/3YAirxy
Products I use
Active Short Gun - shop.activeproducts.com?sca_ref=2600661.YNbljSrmHt
MJJC S 3.0 (MJJC Site) - www.mjjc.com/products/mjjc-fo...
MJJC 3.0 (Amazon) - amzn.to/3pp7stK
Pivoting Coupler - amzn.to/3Mr6Om3
Cart - amzn.to/3jNalzz
Giraffe Tools Retractable Garden Hose Reel - amzn.to/3NuwQpz
Refill Resin 2 Liter - amzn.to/3JcUa8g
Solo Battery Powered Sprayer - amzn.to/3u6IxKe
Kingkast Waterproof Gloves - amzn.to/3oGitnZ
Syphlid Waterproof Garden Shoes - amzn.to/31Cdhc9
Awesome Multi Tool "Wonder Wrench" - amzn.to/3ghAOTM
Greenworks 2300 Amazon Version - amzn.to/3KgJqH9
Heavy Duty Hose shutoff Valve - amzn.to/3NPcPdQ
De-Ionization - amzn.to/3yNH8bZ
Griots Brilliant Finish Foam Cannon - amzn.to/3thb4MB
Griots The Boss Foam Cannon - amzn.to/3yLegkx
Magnetic Cup Holder - amzn.to/3BQvNtH
SGS28 Swivel Spray Gun - amzn.to/3s20y9z
SGS28 Swivel Spray Gun Fittings installed - amzn.to/3dTuKPh
VE52 Pressure Washer - amzn.to/3fWWqp9
VE52 Pressure Washer Alternative (Same unit different cosmetics) - amzn.to/2WrBNK6
MJJC Foam Cannon - amzn.to/3v00rO6
MJJC Site - www.mjjc.com/collections/foam...
Firehose Nozzle - amzn.to/3d9SKLv
Garden Hose Quick disconnect - amzn.to/2Ya7uG6
Brass Garden Hose Shutoff valve De-Ionization - amzn.to/3d39O93
Pressure Washer M22 to 3/8 Quick disconnect - amzn.to/3xB7DkZ
3/8 quick disconnect - amzn.to/37HzIeA
Drill Brush Rim Twister - amzn.to/3bGAIDj
EZ Detail Brush - amzn.to/2BmH9f6
Small EZ Detail Brush - amzn.to/3i72Qzu
Tire Brush - amzn.to/3ARRh9X
DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission on a purchase without additional cost to you. If you do purchase through my affiliate links, thank you so much for your support!
#pressurewashing #uberflex #hose

Пікірлер: 140

@archiepezek 5 ай бұрын

I really enjoy your in-depth and informative videos Keav. I have an Uberflex and it's all I could ever want. Thanks for your work.

@CarsWithKeav 5 ай бұрын

Appreciate that!

@AntLive29 Жыл бұрын

Always with the good information. Thanks!

@CarsWithKeav Жыл бұрын

You’re Welcome and thanks for watching.

@400080vikkash 10 ай бұрын

Great job explaining it, your very good at it!

@CarsWithKeav 10 ай бұрын

Thank You

@annagraham6204 Жыл бұрын

Excellent review again. The difference your channel provides is truly having solutions where others “solutions” actually cause more problems.

@paligis9777 Жыл бұрын

Hahahaha ditto

@CarsWithKeav Жыл бұрын

Thx

@CarsWithKeav Жыл бұрын

Thank you so much.

@micdev42 3 ай бұрын

Really helpful video even for me here in the UK. I love the way you demonstrate real world useability. In particular you've sold me on the idea of a 1/4" hose instead of 3/8", since like you I was leaning towards 3/8 for the same spurious reasons. I want to upgrade the (rubbish) stock hose / fittings on my DIY pressure washer so that it is Quick Connect for the full pipeline. Thanks for the info.

@CarsWithKeav 3 ай бұрын

Yeah, it all comes down to preference and when upgrading a DIY setup Uberflex is a great option. Now once you decide to go all out the 3/8 hose is what I would suggest if running and AR630 or a Kranzle. They seem to run better in a 3/8 vs a 1/4 from what I have witnessed.

@protechno5778 Жыл бұрын

Thank you for this video, it answered a few questions for me.

@CarsWithKeav Жыл бұрын

You’re Welcome

@MetronomeOne 9 ай бұрын

Great vid. Thanks for posting. I will probably get both hoses: 3/8" for down streaming chem and 1/4" Uberflex Hose for car washing.

@CarsWithKeav 9 ай бұрын

Best of both worlds!

@patdud1979 Жыл бұрын

Hey I just wanted to say thank for the information your putting out there and the effort your putting in your video 🤙 you may not get a lot of views but your video will help people make better buying decisions so thx 🤙

@CarsWithKeav Жыл бұрын

It’s a grind we will keep growing. Appreciate the positive feedback. Lots more to come.

@kirbyschneider4187 Жыл бұрын

Good review! Thank you!

@CarsWithKeav Жыл бұрын

You’re Welcome

@anthonyb8405 Жыл бұрын

Ive only used 1/4" single wire hoses. Even with my gas PW. I get mine custom made from Kleet-Rite... currently running their 75' continental hose with my 2.0 and love it!

@CarsWithKeav Жыл бұрын

Very nice, if you not putting out 5 gpm and 4K psi don’t really need a 3/8.

@bizmofunyuns6463 Жыл бұрын

The Uber flex is awesome. Life changing

@CarsWithKeav Жыл бұрын

Agreed, I was surprised how good it is.

@AGChomperz Жыл бұрын

My greenworks came with a 25ft uberflex, instead of buying a replacement 50ft, ordered an adapter and another 25 footer and linked the two. saved about 20 bucks that way. Always a fan of the blooper reel!

@CarsWithKeav Жыл бұрын

Must have been a Greenworks Pro model? I know Propulse makes Uberflex hoses for some Manufacturers as well.

@ChrisL-rh7io 11 ай бұрын

@@CarsWithKeav Yup, Greenworks Pro. I bought the same one and tested the Uberflex that came with it. I'll likely be switching brands from the MTM with how much more manageable the Uber is. Been fighting the MTM hose for years.

@chaslp 11 ай бұрын

Great video. Very informative, entertaining, and enjoyable to watch. I just subscribed. What is that on your garage floor? It looks great.

@CarsWithKeav 11 ай бұрын

Swisstrax flooring tiles. Did a video of it here kzfaq.info/get/bejne/frxoq6eosrvHpJ8.html

@mr.alanmurphy1169 Жыл бұрын

love it!

@CarsWithKeav Жыл бұрын

Thanks

@Kiki099 Жыл бұрын

It's funny you mention it because I personally run a 3/8 OG spec Kobra Jet but recently got a chance to try out my buddy's 1/4 Uberflex and I fell in love with it so much that I decided to buy one myself. Some may say it's a downgrade but in my opinion it's an upgrade I just love the feel and the weight.

@CarsWithKeav Жыл бұрын

I was surprised how good it is. I got caught up in the OG mindset when I first started out. The last year I have broke from that. Glad I did or I would still be struggling with that small neck on the pf22.2 foam cannon. OG has some good stuff though and at times good advice. Just doesn’t always have to be Matt’s way. I like a good mix.

@Graytree2002 5 ай бұрын

Love your videos, genuine and to the point, thanks a lot!

@CarsWithKeav 5 ай бұрын

Appreciate that!

@Enthusiast_detailing Жыл бұрын

I’ve used multiple 3/8 and 1/4 hoses. The uberflex is my top pick my only con to it is I wish it was a smooth jacket so when I reel it in I can clean it with a microfiber much easier

@CarsWithKeav Жыл бұрын

Smooth jacket is a nice feature, but it is costly.

@DerekGH 11 ай бұрын

Good, honest video. I'm about to purchase the uberflex 50' foot hose for my gas pressure washer, 2900 PSI and 2.3 GPM. I'll let you know how it goes.

@CarsWithKeav 11 ай бұрын

Be very careful with the Uberflex on the gas pressure washer its max is 3100 PSI so any spike could be a problem. they do make a another 1/4 hose that is red in color that holds 3700 PSI. They also have a 3/8 hose that has the same material. 3/8 I think is better for a gas pressure washer compared to an electric one.

@DerekGH 11 ай бұрын

@@CarsWithKeav thanks so much for the info.

@wilfredgomez2632 Жыл бұрын

Hi Keav. I’m really enjoying your videos. Thank you for that. Have you or anyone, tried/tested/heard about the Yamatic SuperFlex pressure washer hose? I bought it bc was 75’ no one has it. Before installing It id like to hear about it. Thanks.

@CarsWithKeav Жыл бұрын

Can you post a link to the exact hose. They have several. Many have down reviews on different types of their hoses and it’s usually decent to good.

@nu2comments 3 ай бұрын

Can you give more information on that cart in the video. My garage doesn’t have enough space for the wall mounted hose reel and PW shelf so that cart set up looks like a great idea.

@CarsWithKeav 3 ай бұрын

That cart was a once in a lifetime purchase I scored a lottery win there. It was listed on Amazon for $99 and only one in stock. 100’s have asked about it and I have only been able to find this Shuter brand on industrial supply sites for $600 or so. It is a crazy stout cart with 1/8 inch thick powder coated steel everywhere and no rattles just smooth. I stopped using it in my wash cart videos because I hated telling people they couldn’t get it. I do have several cart videos going over different versions over the years. Here is a link to the cart series playlist if you are interested. Several of them feature this cart. kzfaq.info/sun/PLviiGueuNn2XZHqSnVcaePgVg33uEMLB3&si=DZJIHWhkKuaLQ7Fl

@bevaninaustralia Ай бұрын

thank you 👍

@CarsWithKeav Ай бұрын

You’re welcome

@tc9148 16 күн бұрын

Got this from Active --. Active Products Inc. Tom C Yes, the 40' hose provided with the 2.3 is steel braided, and so is the 20' hose for the 2.0. We've seen some users having some surging issues with the 2.0 using the Uberflex, so we recommend using a steel-braided hose like the Kobrajet for this unit.

@CarsWithKeav 16 күн бұрын

Later after this video I started getting the surging issues with the Uberflex. I switched to my Kevlar braided hose and have not looked back. There is for sure issues with the 2.0 and the flexible hoses which expand under pressure causing the pressure switch to not act right. The wire braiding helps keep that expansion from happening.

@tc9148 16 күн бұрын

@@CarsWithKeav Could you post a link to the Kevlar braided hose you use? Good to get his issue our there.

@CarsWithKeav 16 күн бұрын

@@tc9148 Right now I can only find 35ft and 75ft hoses both are on this listing. 50ft have been sold out for awhile. amzn.to/3RGCsAZ

@DallanXp Жыл бұрын

Thank you for video, I’m building a similar setup to yours and I was really confused weather to go 1/4 or 3/8. I think 1/4 should be me plentiful for me.

@CarsWithKeav Жыл бұрын

Only time you really need to go 3/8 is if you go over 100ft. The pressure drop on 1/4 is significant at longer lengths. The drop is more at 50ft, but not enough to be noticeable.

@DallanXp Жыл бұрын

@@CarsWithKeavOh I see, I purchased 100ft 1/4, I’ll really only be using it to my clean cars but my thought process was I’d like to reach every corner of my house. For some cleaning here and there. Do you think I would see a huge drop in pressure?

@CarsWithKeav Жыл бұрын

@@DallanXp I wouldn’t think so. Might be 100 psi, 3/8 has pressure drop too just not as much. You could easily make up for it with a different orifice nozzle.

@adamlolley1836 Жыл бұрын

Great video. My question is how is the Uber Flex after it has been on the reel for days. My current hose retains the reel memory and is a pain in the butt. I am fighting all the coils for a good part of the wash. Thank you

@CarsWithKeav Жыл бұрын

I have had it on the reel since making that video a week ago and it still lays flat. My Flexzilla garden hose which is the same type of hose has been laying flat even after being on the reel for a month. I know of several that have had them on reels for years without any problems.

@adamlolley1836 Жыл бұрын

@@CarsWithKeav Thank you

@johnryan1386 3 ай бұрын

Just wish companies would move away from M22 fittings on 1/4 hoses. Only reason I went with a 3/8 as it came with quick connect fittings.

@CarsWithKeav 3 ай бұрын

Me too, but got to remember we are 2% of the market when it comes to pressure washer accessory sales. Most of the world doesn’t care about the fittings. M22 itself is a great connection when it comes to being a hand tight no leak connection that easy for a consumer. You can connect quick connects to m22 pretty easily and even if you have 3/8 pre-installed you still need an m22 to QD adapter.

@bigskytraveller289 Жыл бұрын

Hose diameter, and length, affect flow rate much more than they do pressure. It would be interesting to compare the GPM produced by both hoses.

@CarsWithKeav Жыл бұрын

Might have to try. I know after 50 feet the pressure and flow drop is significant. Main reason why Uberflex doesn’t make anything longer than 50ft in 1/4 inch.

@edgbandzz9435 Жыл бұрын

this has already been tested it does not affect PSI or GPM do ur research lol

@cebasmb8250 11 ай бұрын

Yes true I order that uberflex for my electric pressure washer, my pressure washer is 2000PSI the uberflex keep surging my pressure washer, attached my 3/8 and works fine those smaller hose are for cheapie pressure washer

@KenyonPayne Жыл бұрын

I'm curious how the 3/8 uberflex or flexzilla Compares to the Amazon. I put together a 100' 3/8 reel with a "non-marking" hose and it feels like lugging around big steel cable once it's full of water

@CarsWithKeav Жыл бұрын

After trying the uberflex I don’t understand why I lugged around the 3/8. I didn’t realize how heavy it was until I tried this. 3/8 uberflex would still be lighter and more flexible, but if I go 3/8 it’s because of durability and the 3/8 Uber still has a max PsI of 3200 and is still cold water only.

@KenyonPayne Жыл бұрын

@@CarsWithKeav I might have to do a test where I see how much pressure/flow drop is done on my 3gpm machine comparing my 3/8 and 1/4, sucks cause there aren't many options for 100' 1/4 hoses, which would be handy in a shop application

@CyberSkunk90 Жыл бұрын

Any hose is going to be fine if you have a fancy reel like that. I have that uberflex and it still trys to link up and what not.. Why? Because it isn't being stretched to lay perfect on the reel. I wind mine up on a handheld extension cord reel so for the most part it works, but yeah. Having a reel like that is a total game changer

@CarsWithKeav Жыл бұрын

Funny thing this is the cheapest hose reel designed for pressure washer hoses you can find really. I could see any hose having issues with a reel not designed for them. If when using these reels I still have to straighten the hose before doing it or it will loop on me a good bit.

@russelbalugo2071 6 ай бұрын

Does the uberflex have a break-in period. I brought one, not from Amazon, but a reputable detailing website here in Australia and arrived yesterday. But mine coils over itself easily and does not uncoil as easily as yours. Not as bad as the cheapie hose that I got but it still coils pretty bad compared to what you demonstrated in your vid.

@CarsWithKeav 6 ай бұрын

I do tend to work the hose from end to end to try and pull out the memory from the packaging. Pulling on it and massaging it with my hands. Another thing is you can fill a big bowl with hot water from the tap and soak it in it then work the hose with your hands will be much easier then. Just don’t use boiling water as the hose is not rate for more than 140 degrees.

@jtekz_ Жыл бұрын

can you link the 14mm to 3/8 npt with the o ring

@CarsWithKeav Жыл бұрын

As long as the 3/8 you are connecting to is female. If it is male like most hoses would be you would need an m22 14mm male end and a 3/8 female npt on the other side.

@pierrelabbe3173 10 ай бұрын

Love Canada M.T.L Merci Québec 😮

@user-mp6ep9bw6c 3 ай бұрын

Do you think the blue kobrajet hose coil like the gray one?

@CarsWithKeav 3 ай бұрын

They coil similar. Here is a video where I compare several hoses one being basically a full copy of the blue Kobrajet. kzfaq.info/get/bejne/mduna9Oklc7DiHk.htmlsi=XhWHJRkAT-seVFEY

@Workrelatedstufff 7 ай бұрын

I’m trying to find a really light and compacted garden hose for my pressure washer that’s easy to carry around on my trunk. Any recommendations???

@CarsWithKeav 6 ай бұрын

Good light hose I like is Flexzilla 5/8. I have not tried any of the stretchable kind yet to give an opinion, but I want to try some just to see some day.

@Workrelatedstufff 6 ай бұрын

@@CarsWithKeav I just got a 50 foot aquastrech hose for 20$ from Walmart the hose is so light I’m hoping it works out I can’t find anything saying it dose or doesn’t work online

@mainsource8030 6 ай бұрын

zero g 5/8 or 3/4 in hose from lowes

@CommunityThriftStore-sn4hh 2 ай бұрын

Can you use a 3000PSI hose on a 2600 pressure washer?

@CarsWithKeav 2 ай бұрын

I don’t see why not the rating of the hose is higher than the machine, but me personally I would use a 4k PSI hose on a 2600 just to make sure I’m not wearing out the hose quick and just for safety.

@PerryShriver 10 ай бұрын

👍👍👍👍👍

@CarsWithKeav 10 ай бұрын

Thx

@user-lr6ie4wx4q 2 ай бұрын

Maybe the best option would be a 5/16 hose which several of the manufacturers make

@CarsWithKeav 2 ай бұрын

Possible never looked into them.

@user-lr6ie4wx4q 2 ай бұрын

@@CarsWithKeav if you buy the full kit with the Active 2.0 you actually get a 5/16 hose so that seems to be their choice for size

@superado2k Жыл бұрын

Great content, as always! FYI...link for McKillans Nozzle Guard is not the correct link...it takes you to a Selkie brand gun with foam cannon and accessories.

@CarsWithKeav Жыл бұрын

Thank You for letting me know, looks like whoever is posting these changed up the listings for some reason.

@DZX5000 Ай бұрын

if i go from a 25ft hose to this blue 50 ft hose, would i see a noticeable pressure loss, not sure if that was covered in the video… cheers

@CarsWithKeav Ай бұрын

No pressure loss at 50ft on a 1/4 hose. As you get to over a 100ft is when real pressure loss starts being noticeable.

@DZX5000 Ай бұрын

@@CarsWithKeav thank you for the information, cheers 🍻

@DMCnME 4 ай бұрын

No GPM difference? I'm due for a pressure washer upgrade and was considering a Kobrajet "upgrade" over the Uberflex. Still using the Uberflex?

@CarsWithKeav 4 ай бұрын

No GPM difference at this hose length. You can get pressure drop using a 1/4 inch hose when you get 100ft+. I did go back to 3/8 because of the Kevlar hose I am using is much lighter and less diameter than a Kobrajet.

@DMCnME 4 ай бұрын

@@CarsWithKeav Is that the Blue Shield Kevlar you reviewed?

@CarsWithKeav 4 ай бұрын

@@DMCnME yes

@chamuko999ify 9 ай бұрын

You say this hose doesn't tangle, but have you already put pressure washer on it?

@CarsWithKeav 9 ай бұрын

It doesn’t tangle with pressure either. With pressure you lose some flexibility as expected and the loops just pull right out and no kinks. Used it for a good bit before replacing recently to use the Uberflex for another cart project.

@TheGjkddk Жыл бұрын

What’s the best cheapest reel I can get?

@CarsWithKeav Жыл бұрын

This is the best I have seen for the money. The same one I use in the video. 50 ft hose reel for $89. amzn.to/3BB3iSL Have to be careful what is out there many are for air hoses. Also, remember there is added cost to buy a jumper hose to connect to your pressure washer. If using a 1/4 hose you can get 100 foot on there as well.

@chelo3510 5 ай бұрын

I bought the Uberflex and reel but don’t understand how you connect everything. If I connect uberflex to reel how do I connect reel to power washer? I got Active 2.0

@CarsWithKeav 5 ай бұрын

You need a jumper hose to go from the pressure washer to the hose reel. Depending on the hose reel you bought the input from the pressure washer could be in different spots. On mine I show in the video it is at the base where it is mounted to the wall. I explain in this video around the 20 minute mark kzfaq.info/get/bejne/jZmlo9F7tbqVpHk.html

@chelo3510 5 ай бұрын

I see the disconnect. I have a different reel, I purchased the Coxreel. So I have to buy the adapter you mentioned in your video and do it that way. So I have the jumper hose and that will hook up to the reel on the outside connection, while the uberflex will be plugged in inside the reel via the adapter connector. I appreciate the help!

@CarsWithKeav 5 ай бұрын

@@chelo3510 Thats a really good reel. Hope you enjoy it! Any other questions feel free to ask. DM me on Instagram is the best way so we can exchange pics and videos of what we are trying to remedy.

@vectorr6651 11 ай бұрын

I picked up 100 feet of yamatic. I need to find a hose reel for basic home use I saw a video to Adapt a 40 dollar hose reel. I can’t imagine spending hundreds of dollars for basic home use. Also hundreds for a vacuum hose.

@CarsWithKeav 11 ай бұрын

The one I have is 50ft, but there is a 100ft version that I had on my wash cart. Just a little over $100. I’ve heard many do the $40 air hose reel conversion. I myself probably won’t do that as it’s not designed for that type of pressure. I know some mobile guys using it all day with no problems so I guess it works. I just saw this one it’s $90 and comes with the jumper hose which usually cost $25. Same design as the one I have. amzn.to/3OaZttl

@vectorr6651 11 ай бұрын

@@CarsWithKeav thanks!!!! For something like this can we use 25 feet and still leave some on reel vs on the air hose one we can’t use while on reel because of pressure and hurting hose and reel? Thanks again!!!!

@CarsWithKeav 11 ай бұрын

@@vectorr6651 Absolutely, you can use it with only reeling a foot and leaving 99 feet on the reel. It’s designed for pressure that a pressure washer gives. You may have been watching Imjoshv video and he is right to a point on taking the whole hose off as the hose expands when pressurized. This won’t be an issue if you roll the hose up on the reel while it still has pressure then when done relieve the pressure and the hose will have room to expand the next time.

@anthonyocarroll5630 9 ай бұрын

Can this ublex hose a ryobi pressure washer wb140

@CarsWithKeav 9 ай бұрын

I tried looking up wb140 and got no results, but the Uberflex should connect to any Ryobi. They all use the same connections.

@anthonyocarroll5630 9 ай бұрын

@CarsWithKeav thanks mate it's Ryobi 1800watts 2000psi

@CarsWithKeav 9 ай бұрын

@@anthonyocarroll5630 That should work.

@roin1564 Жыл бұрын

how does it compare to MTM 3/8" Kobrajet?

@CarsWithKeav Жыл бұрын

Have not tried a Kobrajet yet to know. One day I will, but they are expensive.

@mdoyal111 Жыл бұрын

I’ve used both the 3/8 Kobrajet and the Uberflex. I’ve enjoyed both. The 3/8 is just a little bit heavier duty and I feel confident about it’s durability while dragging it on the driveway. The weight really isn’t much of an issue at all when using them, you really only notice it when holding it all coiled up. The jacket of the Kobrajet is easier to wipe off while winding it back on the hose.

@annagraham6204 Жыл бұрын

@@mdoyal111 Thanks for the feedback! Was wondering about the Kobrajet.

@justaddafan 7 ай бұрын

It would be good to see the hose behavior on the floor with water pressure in it.

@CarsWithKeav 7 ай бұрын

I should have, but I did it in my newest video that includes these hoses with some others. kzfaq.info/get/bejne/mduna9Oklc7DiHk.htmlsi=-iY_2YaWyZLkc9Wo

@peterocchiogrosso7597 Жыл бұрын

I’ve been using the Uber flex for years it shows nowhere great hoes. Love your video keeping calm.

@CarsWithKeav Жыл бұрын

It is a great product for sure.

@mattlukie 13 күн бұрын

Never apologize for saying manly!

@CarsWithKeav 13 күн бұрын

Thx 🙏

@leester9487 Жыл бұрын

Doesn't a pressure washer damage a car?

@CarsWithKeav Жыл бұрын

Not if you use the right nozzles to keep the pressure at 1100 PSI or less.

@leester9487 Жыл бұрын

@@CarsWithKeav Well, I guess I'll be following you to find that info out. Thanks. Car washes are expensive and meh. where I live.

@ThePotandVineCo. Жыл бұрын

Looks like Uberflex doesn’t come in 100’

@CarsWithKeav Жыл бұрын

They do not make it in over 50 feet as they believe the pressure drop is too much over 50 feet and you should move to a 3/8 if running 100 foot.

@tigerrider6711 2 ай бұрын

What’s the point of dragging the hose around with no pressure on it? Both those hoses will be terrible under working conditions. Uber flex is just a waste of money.

@CarsWithKeav 2 ай бұрын

You’re right on the testing I have gotten better over time. We all make mistakes. The Uberflex is a good beginner hose, but saying the gray one is terrible under working conditions I don’t believe that been using for years.

@rubenharris9241 Жыл бұрын

Myth debunked 👍👍

@CarsWithKeav Жыл бұрын

Everyday I get out of the OG spec mindset I find some myth that wasn’t true.

@jezza6575 Жыл бұрын

OG wastes a lot of money IMO!

@annagraham6204 Жыл бұрын

You’re right. You need a steady supply of disposable income to shop their on the reg. From what I understand mosmatic isn’t as quality as they’re perceived. I’ve never tried them.

@CarsWithKeav Жыл бұрын

Just costs too much. The mosmatic fittings and swivel are unmatched in the industry, but just not worth the money to me. Matt has a great niche there with the disposable income people, but he still sells Active and MTM because he need the sales volume. I hate to admit I was stuck in an OG mindset for some time. I was brain washed. 🤣

@CarsWithKeav Жыл бұрын

For sure, his niche is disposable income and the best of the best. Problem is a lot of the time best of the best means most expensive and what products he can get an exclusive on. I heard that’s why he went mosmatic after helping design the MTM SGS28 they would not do an exclusive OG spec for him.

@zachmulharan9507 Жыл бұрын

I have the Uberflex with the 2.0 and love it so far.

@DMCnME Жыл бұрын

I’m new to the hobby. Having a blast with it. The OG stuff definitely looks sweet, but I’m rocking a Ryobi 1800, Uberflex, MTM reel, McKillans swivel gun and MJJC v3 cannon. I can’t imagine that OG gear would make a difference to me. Subbed. Great stuff man!!