Yeah, buddy. I’m with you there ..love tinkering! Have a lot of boats to go through and tinker with, over 30 including bare hulls 😄👍

Thanks! I try my best (never thought I’d make a KZfaq video), but always seem to remember a thing or two I forgot to include after posting these videos 😆👍

Aww we

Thanks! Hope to have it back on the water soon - it’s ready to go 😁👍

We are waiting for it !!!!!

Overkill? A sub 26" mono that goes 60mph is a thrill to me, especially one that self-rights. I like them all 😃👍

Yes, flex shaft bent to match angle of motor shaft 👍👍👍

Thanks, buddy! 👍👍👍

Thanks! I got rid of the thru-hull water pickup and used the pickup on the rudder ..used 4x6mm tubing here and a 6mm metal grommet to slide tubing through where it goes into the hull so it looks nice - you can just pull the tubing through the drilled hole without a grommet if you want. You can also use 4x7 diameter cooling tube which doesn’t kink as easily. Can find cooling tubes on Amazon, AliExpress, Offshore Electrics etc. 👍👍👍

www.offshoreelectrics.com/proddetail.php?prod=tfl-alu-gro

Need to remove nut that hold the prop onto the shaft, remove prop, replace with new prop, put nut back on. Maybe some videos on youtube of someone changing props if you search.

I like the look of the white version better - they are the exact same boat, tho. I'm not familiar with the other boat you mentioned. Sorry!

Thanks for suggesting. It means a lot​@@OTWRC

Woo, that's a super long runtime to shoot for! I would try a larger 3s battery, lower kv motor, and a smaller prop for max runtime, but it won't be anywhere near as fast or fun ..and I'm not even sure how much closer to a 45 min runtime that would get you 👍👍👍

-Battery tray from Oxidean Marine -Motor mount, turn fins, and trim tabs from offshore electrics -4mm strut from eBay or aliexpress -Rudder from Amazon or eBay -4mm flex shaft, stuffing tube, and liner from aliexpress

Thanks. Did get the 4mm kit for the boat. $60 eBay

@@jamesstuarttolford1978 Awesome! Makes it a little easier than sourcing those parts separately from a bunch of different sellers lol

Cool, yeah, I've seen it and you're right - no real vids of it yet. It looks good - metal hardware, upgraded esc, etc. 👍👍👍

@@OTWRC i have a feeling it will be a seller.

I would do a 90a flycolor esc, offshore electrics .130 flex cable with 4mm prop shaft, and a CNC prop same size or a mm or two larger than stock and run it on 4s. I ran mine all stock with exception of switching out the stock esc for a 90a flycolor and changing the prop to a CNC type over stock plastic and it was fun, but eventually the plastic motor mount broke, probably from self-righting it so many times - other have done just these upgrades before and have eventually broken the stock flex shaft. Upgrade esc, flex shaft, as prop 👍👍👍

Thanks! Parts are from offshore electrics, eBay, AliExpress, etc. More details of where they came from in video. Good luck! 👍👍👍

Would like to keep the original mount on the motor. Limited ability and tools to do a mod like yours. BTW, again, awesome clean job. Kudos Sir.

@@jamesstuarttolford1978 I’m not sure about installing your motor on the stock motor mount. If I remember correctly, the stock motor was attached to the cooling block that screwed into the mounts on hull, but it looks like this guy was able to separate motor from cooling block and mount a 28 or 29mm motor to it and reuse stock hull mounts kzfaq.info/get/bejne/btyIfNGastjGcXk.html ..you will lose self-righting feature switching from stock outrunner type motor to inrunner, tho 👍👍👍

Got the Rocket 2958 installed in it with stock mount. Found me an Journeyman builder and he mounted the motor on the stock mount perfectly. Kudos to Mr. Dan. The shafts aligned perfectly. Waiting for the new collet to go running.

The cooling setup is gone, but, the mother has an cooling jacket to cool the motor. Once running I be able to check temps. Will update with photos. Is there a will, there’s a way.

I can't remember what the stock size is, but I'm pretty sure it had a 4mm prop shaft so maybe the flex shaft part was 4mm as well ..I may have mentioned what size stock flex shaft is in this video.

Caulk it, in case you ever need to separate again ..and be sure to not tighten screws down too much when putting back together. That plastic is brittle. I snapped a post like that without noticing which allowed water to flood in. Took me a minute to figure out where it was coming from lol

@@OTWRC thanks brother,im doing the maiden today,its going to be 70 here today in chi town.i think my motor is going to be to big,lol but we will see

@@elvispresley2328 👍👍👍 good luck!

Nice. That's fast! I have an inrunner I'd like to try at some point, but want to get 65mph with the out runner first lol

Probably so, 5s with 38-42mm prop, something like that would prob be good (and faster than blue 1600kv on 6s). You can order a 4mm flex shaft with the stuffing tube and liner all together from AliExpress. Offshore electrics also sells shafts/tubes/liners - you could get a .150” flex shaft with 3/16” prop shaft on it and that would be fine ..zipkits sells these pre-made ad well for $19.99 (something like that), just remember you’re strut bore diameter needs to match whatever diameter shaft you’re going to use ..4mm 1 piece shaft needs a 4mm strut … .150” flex shaft with 3/16” prop shaft on the end will need a 3/16” strut 👍👍👍 ..I cut the shaft and tube to whatever length needed with a dremel.

This might help if your arrow is still stock - battery upgrade video kzfaq.info/get/bejne/opafnalhtNbWeok.html

Savox sw-0250mg direct fit

Sorry, no list, but go to the places I mention in the video (AliExpress, offshore electrics, eBay) and type in/search for the parts you need, like ‘motor mount’ ‘rc boat motor mount’ ‘turn fins’ ‘rudder’ etc. and you should find what you need 👍👍👍

Hardware package - dimensions shown in pictures 👍 www.ebay.com/itm/184965539546?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=KNJjriMKTZi&sssrc=2349624&ssuid=5g4BlKugTo2&var=&widget_ver=artemis&media=COPY

I have probably run 30+ 4s packs through the STOCK Esc! No problems. (Regular shaft maintenance.)

4mm flex shaft 👍

I'm pretty sure you'd need a new stuffing tube, especially if you're going to use the 4.76mm shaft with a liner, and the hole in transom where stuffing tube comes out would need to be made larger to accommodate the larger stuffing tube.

Yes, it will correct just fine 👍 ..will try to include a clip of it in the next Arrow video. Thanks!

@@OTWRC EE then you have a full package speedboat We also bought that speedboat and often ride it with the kids on the lake .. But Dad would like to modify it ;-)

lol yah maybe! It works fine in another boat I have, but with inrunner motor (not outrunner).

@@OTWRC probably a crappy batch from China

May have to use smaller prop and check tightness of your coupler after every run 👍👍👍

Going bigger. But tightness is my focus

Thanks! I'm sure you can, just have to make sure to get all the saltwater out and off of everything in the boat. I'm sure there's some vids and info out there for rc boating in saltwater 👍