UDIRC 1/16 / Brushed or Brushless? Full Review!!! 2 Months of Testing. Brushed Winner!
Рет қаралды 21,971
2 жыл бұрынThis Drift Truck can be found on Banggood for between $65-$100 depending on what model you buy. The standard brushed motor version is cheaper, The Brushless Pro version is more expensive but more expensive does not always mean better.
Get your own!!!
Click the link below and search SG 1603
Code:OuterzoneRC save 5% OFF for all rc cars
shop.makerfire.com/products/s...
2s lipo 1500 Mah ZEE battery link:
www.amazon.com/Zeee-1500mAh-Q...
JST 18g wire connector link:
www.amainhobbies.com/align-js...
SG 1603 RTR 1/16 2.4G 4WD 30km/h RC Car LED Light Drift On-Road Proportional Control Vehicles Model
SG 1603 1604 Brushless 60km/h Upgraded RTR 1/16 2.4G 4WD RC Car Drift Vehicles Model Toys SG-1604
#traxxas #traxxasslash #traxxasrally #RCdrift #RCdriftcar #adamlz #taylorray #RCcar
@DMarko22 2 жыл бұрын
Finally a video that confirmed my thoughts about the different motors, thanks mate
@LukeTheExplorer 2 жыл бұрын
Very informative! Great vid brother!
@Texasbroski512 Жыл бұрын
Just got an Hpi micro rs4 and I’m loving this small class of RC I’ve got a slash ultimate Losi tenacity tt pro and a 2wd I went overboard with a castle copperhead system carbon shock towers gtr shocks tsm radio receiver and lcg and these small RCs are refreshing
@notone4540 2 жыл бұрын
Thx for helping me choose the brushed. I thought it would be the better drifter but was gonna buy both to find out. But now I can just buy the brushed because of your review, thanks.
@outerzonerc777 2 жыл бұрын
Yeah the brushless is terrible. If you want to add brushless later your better off going with another kit
@ShirleyAerial Жыл бұрын
Nice drift sesh at the beginning!
@maxwellduff4958 Жыл бұрын
Answered all my questions thanks!
@outerzonerc777 Жыл бұрын
Heck ya. Check this video out if your more into drifting. This is a huge upgrade for down the road. kzfaq.info/get/bejne/f56diZqf3prYhX0.html
@slo-rc4990 2 жыл бұрын
Wished I saw this before I bought my brushless :( Great vid! Keep it up!
@outerzonerc777 2 жыл бұрын
It's really fun having both!
@joseCalderon1976 2 жыл бұрын
Just get the brushed one now 🤣👍
@outerzonerc777 2 жыл бұрын
@@joseCalderon1976 Haha that's exactly what I did.
@drumlover121 8 ай бұрын
DUUUUDE !!! Nice video ! Thanks alot
@ianjohnhorwood2605 Ай бұрын
that's funny when i had the fiesta version , i didn't have a single problem with the throttle speed control on any of the 3 speeds with the pro brushless version , but I did have a problem with steering control . I even fitted two Li-on batteries together in the one tray for , as well as fitting oil shocks , as well as the toe out plastic bars .
@FREEDOMADE 2 жыл бұрын
Sweet, I’ve saw your post on the Traxxas community. I really want to buy this soon.
@outerzonerc777 2 жыл бұрын
Dude get one, they are super fun! You will be happy.
@TheSerbianG 11 ай бұрын
I like the Porsche version a lot and debating between that one or the new Pinecone rally with updated shocks. In terms of looks the Porsche wins hands down. Or spending double and buying the H14MK but that one seems crazy fast.
@matred3538 2 жыл бұрын
Thanks. Just got a Lancia version, and I'm going to keep it on its brushed set up strictly for drifting! I don't need any extra speed, and have cars that can do 70+kmh.
@outerzonerc777 2 жыл бұрын
The Traxxas 380 motor is a really nice upgrade for drifting but on both cars I did it on when you get like 50 feet away the stock transmitter starts acting up and throttle sticks. But if you keep it close it's definitely a upgrade from stock and let's you do much faster drifts. The best setup if you want to upgrade for drifting is going to be a Traxxas 380 18t mixed with the hobbywing 1625 esc and then a dumborc transmitter and receiver. I skipped the Gyro on the receiver. I put that set up on this car and it's 100% flawless!!! My aliexpress Hoonicorn below: kzfaq.info/get/bejne/r8t5qZt1yMyYhGw.html
@matred3538 2 жыл бұрын
@@outerzonerc777 thanks loads for the extra info. I run Dumbo rc on a bunch of stuff, and nice one on the ESC heads up! ☺
@outerzonerc777 2 жыл бұрын
@@matred3538 ya brother no problem, then your almost there if you already have the dumbrc stuff. You will really like the extra smooth power. If your wanting to keep your lights I figured this out in link below, For the rear you will need a strong bulb, the rear bulb will just burn up if you plug it in. kzfaq.infozQZ507UyUJg?feature=share
@timwegman5776 11 ай бұрын
Ive got the same brushless and i just thoaght i had a bad esc or motor but mine does exactly what you said and it is a pain to drift you need a huge area and still bad.
@sb-ez2ss 2 жыл бұрын
Great video. Could you possibly do a 4 wheel drive to rear wheel drive conversion. I'd love to see a tutorial as I don't know what I'm doing. But the result has to be a more purebred drifting experience
@outerzonerc777 2 жыл бұрын
I could make a video and I may, I have about 4 videos I need to edit at the moment but will take a mental note and try to put a link here if I can catch up and post. We are working on a back yard clay track at the moment. : )
@maxwellduff4958 Жыл бұрын
@@outerzonerc777 I know its been a while but id love to see this
@outerzonerc777 Жыл бұрын
Yea the truck does not work well as a 2wd drifter. I tried it but it has bad weight distribution and not enough steering angle to do well. Better off enjoying it for what it is.
@chrisf5475 2 жыл бұрын
Wonder if you can recalibrate the brushless esc. Never done it with cara but do it with all my planes. Usually have to turn the model on with throttle at full then wait for some beeps. I guess these RTR cars don’t have that feature though?
@outerzonerc777 2 жыл бұрын
I believe the brushless model is geared to high for the high kv of the motor. The brushless model needs a smaller pinion gear to give it more torque. It is cogging at take off. I believe a better brushless system would help but it would be harder to incorporate the cool lights. I'm going to try a smaller pinion and maybe larger spur gear. I think it will help.
@faiqcreates 2 жыл бұрын
Great video thanks! The brushed motor, if i use it for drifting, constant speed shifts and breaks, how long do you think the motor will last before it blow up/burns or something? Also how frequent do you clean the brushed motor.
@outerzonerc777 2 жыл бұрын
I'm not sure how long it will last, electronics are tricky. A new brushed motor this size is very cheap. Honestly I know more about brushless stuff and have never cleaned a brushed motor. I do understand that people just drop the brushed motors in water and turn them on to break them in and make them faster for racing. I won't be messing with that. I will probably just blow out the brushed with compressed air every once in a while.
@suit4mei11eat4u 2 жыл бұрын
Cool music
@outerzonerc777 2 жыл бұрын
Thanks brother
@MickeyLimon-zm2fx Жыл бұрын
What lipo battery you use im looking for one to fit i need help
@user-kb1lo1se5c 2 жыл бұрын
へいらっしゃい おまちどうさま 喧騒まみれ この街の演奏 黙ったまま一度ついておいで 世界中魅了するほどに豪華な
@snehamarykuriakose1707 2 жыл бұрын
Hi, its a nice video. I just bought an ud1604 with 2 batteries. Is there any way to store my one battery for a long time because in my area there are rc batteries available so the only way is to import it from other countries. I'm planning to use one battery any keep the other without using .
@outerzonerc777 2 жыл бұрын
It's better for the battery to rotate and use them then to let sit.
@StingrayOfficial Жыл бұрын
I wanna buy a couple of these, will I have a problem with radio frequency? Or is that a thing of the past? Been out of RC for decades. thx
@outerzonerc777 Жыл бұрын
Hey, get a couple, frequency issues is a thing of the past. Definaly go with the brushed version then upgrade down the road. Brushless pro set up is garbage. Hit me with any other questions, glad to help.
@pigeonqc4318 Жыл бұрын
6:05 No, it's 50% to 75% to 100% power. I have a brushed version and it's working like that with the channel 4. For some people the channel 4 change the lights settings.
@fitchyyboi 2 жыл бұрын
19:08 for speed test
@outerzonerc777 2 жыл бұрын
Haha, since then I have upgraded the electronics so I would not be able to test the stock brushless setup unfortunately.
@dustyfarm5r577 Жыл бұрын
They both drift dude i can get these with drift tyres an normal tyres
@DJIDroneUser 5 ай бұрын
Brushless is more coggie than brushed unless if u use a sensor lead
@SHESAMAN 2 жыл бұрын
How do you wire the male connector wire to the battery ? Do I just by the wire ?
@outerzonerc777 2 жыл бұрын
The best way is to solder, but if you don't have experience in soldering you have 2 options. #1 take to hobby shop and pay a few bucks to have it soldered on which is the best option, Or you can buy heat shrink solder to connect the wires. Here is the link to the wires I used. It is the thickest gauge with male jst I could find. www.amainhobbies.com/align-jst-male-connector-agne11169a/p235242?gclid=Cj0KCQjw6J-SBhCrARIsAH0yMZiro50m3rD02-okP4IZShYen6j_Vr-ZYSuTiNeI4JamLSsaICZ9rNIaAtCFEALw_wcB
@rickybell2.056 2 жыл бұрын
I'm gonna get some for drifting,and thought the brush less would be better , now I'm rethinking my choice????
@outerzonerc777 2 жыл бұрын
Yea definitely go brushed for drifting. The brushless is only fun going fast, it's way to inconsistent for controlled drifting. You will really like the brushed one and you can put a traxxas brushed 18turn 380 motor and it's pretty damn powerful. I have been through 3 of the crappy brushless esc too, things from no throttle, to built in receiver braking, to steering servo changing directions. The brushed version is just better. Larger scale cars do pretty good when brushless but it seems to be a issue with a lot of sale scale cars.
@rickybell2.056 2 жыл бұрын
@@outerzonerc777 thank you very much for your reply, I'm going brushed :) thanks for the great videos also
@quad_jake904 Жыл бұрын
I just got my brushed one and upgraded the shocks to the red ones; the thing is amazingly fun and controllable. I'm thinking of trying a 3s lipo to make it really fast, but it's so fun as-is I don't want risk burning up anything but tires. Have you tried 2s liPo high voltage?
@agusmahendra8106 2 жыл бұрын
I think i don't like the plastic drift tire , it's too loud noise on the floor and sound like cheapy feeling....any suggestion for same size rubber drift tire?
@outerzonerc777 2 жыл бұрын
The car won't make enough power to drift with rubber. The plastic is slick so it allows it to drift. I would suggest finding another surface like a garage floor or driveway to drift on.
@tmar352 2 жыл бұрын
Get softer drift tires
@grattzz6325 Жыл бұрын
does the brushless one do better if I buy an actuall wheels for drifting ?
@outerzonerc777 Жыл бұрын
No sir.
@drothebarbercruz1464 2 жыл бұрын
How did u swap connectors on battery bro
@outerzonerc777 2 жыл бұрын
I cut old one off and soldered this one on in link below. Any hobby shop can do it for you for a few $. Here is the link to the one I used,it's the thickest gauge wire I could find which is important. You also could use wire connectors but so solder is stronger and better for the electronics. www.amainhobbies.com/align-jst-male-connector-agne11169a/p-quqct2rqbbzxactz?gclid=Cj0KCQiAk4aOBhCTARIsAFWFP9HPgNfARhZiTTOPyDUPHuWhjCQJpvmf3helwKU42IpOS_YbfEcABq0aAsUeEALw_wcB
@appleslider999 Жыл бұрын
Good 👍
@triv7252 2 жыл бұрын
I find the drivetrain of the brushless to be much more noisy than the brushed, I've checked the alignment of everything but it's all good - have you noticed that the brushless is noisier?
@outerzonerc777 2 жыл бұрын
I have not noticed it to be louder but it's very possible. I have not had my diffs apart on these trucks yet, I wondered if they put the metal diffs in the brushless but I haven't seen anyone say it was a factory upgrade so it's probably not. I have heard people say the metal diffs are noisy.
@seirahefn1100 Жыл бұрын
Im buying an RC as a gift to my boyfriend. He never owned one but he really likes drifting. I was thinking of getting a UDIRC 1607, but im torn between brushless and brushed because brushless is faster .. so that would be satisfying since he will only have this one RC But then now the brushed is better for drifting. Should i just get the brushed and let go of the extra power and speed ? If u’re having only one RC .. which would u choose?
@outerzonerc777 Жыл бұрын
Get the brushed one. The brushless one sucks. If he gets into it he can always put new electronics down the road. The brushed is 100% better then the brushless for drifting. It's still pretty fast brushed.
@seirahefn1100 Жыл бұрын
@@outerzonerc777 perfect! Brushed it is!!! Thank uu 💯👏🏽🫀
@outerzonerc777 Жыл бұрын
@@seirahefn1100 brushed is 100% better truck. If you want to make it a fast RC car down the road, it's better just to put a whole new system in it.
@seirahefn1100 Жыл бұрын
@@outerzonerc777 looking forward to it :D thank u for counseling on this :D Totally subscribed for future reference dude !
@bakeralex201 2 жыл бұрын
Did you try adding a capacitor to the brushless?
@outerzonerc777 2 жыл бұрын
Yes I did, I put a big fat racers edge cap on and it did very little. I believe the issue is the kv is to high for the gearing. I can not find a lower gearing to match the .06 pinion gear mesh so I have a 3200kv motor on the way to see if that fixes the issue. The stock motor is 3900kv and it seems like the esc has a shut off when it senses cogging. Yes I know I can get a new transmitter and receiver and more powerful esc but I'm trying to solve the issue for the community that wanted a plug and play set up and desires to keep the original lighting set up without a lot of modification.
@bakeralex201 2 жыл бұрын
@@outerzonerc777 just got mine threw a cap in and the lights don't dim anymore its also smoother!
@outerzonerc777 2 жыл бұрын
Where exactly did you install the cap?
@bakeralex201 2 жыл бұрын
@@outerzonerc777 the open Jr Port (same style port the steering servo goes in) I put a 4700uf 10v in.
@outerzonerc777 2 жыл бұрын
Ok I tried putting the cap pack where you did. I didn't notice much benefit. The same day this new motor I ordered came in and it fixed the issue 100%. Here's the video! kzfaq.info/get/bejne/h5d8Z7xeuJ3Ye4k.html
@rctuner832 2 жыл бұрын
Good drift skills! Brushed motor is mor comfortable for using and driving. Brushless is too fast!
@outerzonerc777 2 жыл бұрын
Yes I agree, I made a video where I put a smaller brushless motor on, gets rid of cogging and slows it down just enough. With the smoother throttle control and a little less power it feels really nice. I will be converting it into a rally soon. Here is a link to that video: kzfaq.info/get/bejne/h5d8Z7xeuJ3Ye4k.html
@agusmahendra8106 2 жыл бұрын
Is that zee battery 3s battery??
@outerzonerc777 2 жыл бұрын
Hey, it's a Zee 2s 1500 mah battery. But it feels stronger then stock for sure.
@germanyproductreviews4136 2 жыл бұрын
Can it carry a GoPro the brushless one
@outerzonerc777 2 жыл бұрын
Probably not it struggles with low end power and is not too smooth. You would be better with the cheap brushed version. The cheap brushed version will have better control and better throttle response if your trying to use to film stuff. The cheap one is plenty fast enough.
PERTH WEST OZ RC
Рет қаралды 9 М.
RC Expats Hong Kong
Рет қаралды 11 М.
Outer zone RC
Рет қаралды 14 М.