1971 we had a VW bus. I built a camp cook box that was almost as wide & tall as the rear opening. We used it for many years & donated it to our friends when we moved. They continued to use it for decades. It was super to tent camp & have a kitchen wherever we went. We now have used a class A motorhome for the past decade or so, but hard to beat the setup we had then.

When I was a teenager 40 something years ago, my dad made a box similar to yours and called it a "grub box." I did a search for that term because I want to build one and your video came up. I guess "chuck box" is the modern term now and I'm glad I got your site. That is a beautiful build and I hope to make one soon. Thanks for the thorough video.

I really like your setup! Thanks so much for sharing your build! I'm preparing to build my first box. Would you be willing to share your plans? And I'd like to see how you mounted the pvc shelf to the box.

I like the 'dado' cuts on the side walls for shelves. Smart way to do it without screws all over the place. Your visuals and audio is very clear, makes a difference. It was very instructive to see how you did the joinery. Much appreciated! Please consider no music at all. There is a Zen to silence and natural sounds which are soothing. and relaxing. Music, even low background music, is a buzzing continuous sound that interferes with hearing your voice and irritates like sandpaper on the ear drums. Music is not for DIY, demos, tours, and wildlife videos. 1:30 - I would have sanded off the glossy finish on edges of the bottom board. The wood glue won't stick well to that finished board. Love the lantern stand and towel rack, genius! The finished box looks so functional and roomy, really well done, Justin. Bravo! The matching table stand is a work of art too. Beautiful CNC work on front too. What an artist you are! My sealer of choice is Varathane Oil-based Clear Interior Satin Polyurethane. I usually either stain, or use Boiled Linseed Oil on bare wood, let dry for 1-2 days. I dilute Poly 40:60 with Mineral Spirits or even 50:50. Then I do one coat, applying Poly liberally, wait for 10-15 mins, then wipe off excess, smearing it evenly but thinly all over. No drips, no gobs, no heavy coating. Let dry to touch about 2-3 hours. Repeat twice. The diluted poly soaks into wood well and hardens wood further. Wiping it off or smearing with paper towels, allows finish to look natural like a hand rubbed piece, where the wood shows through and not artificial. You will need 3 coats ideally if Poly is thinned out. You can sand lightly if dust sticks to finished coat. Not necessary to sand if you use Satin not Glossy. End result is a hand rubbed look with the durability of Polyurethane which is a robust coating. I am not fond of water based Poly as this never dries as hard and is more prone to dents and scratches.

Really creative and skilled.

Would love to find one of these to buy. I'm currently using a Stanley expanding and rolling toolbox

You should build a backpacking version. Ive allways wanted a backpacking chuck box

What a great idea!

Great job.

Nice craftsmanship!

you never did an update on this! Would love to see what you put in it and how it works.

Bill Dixon from Pungo Prarie has a really nice setup as well.

Great build!

Nice quality build…you are a craftsman!

That’s nicer than something you’d find in a store

Did a very similar build. Only thing I’d suggest is throwing some thin stainless down on top of your work surface. Really helps with clean up and you can actually cut on it in a pinch. Great job!

Real nice Justin.👍🏼☮️

very nice we all beg for plans 😁😁

Looks great.

Top Vid Mate. Great design.

Nice build! I took a different approach with my chuck box, but what matters is we’re camping and cooking delicious food in the outdoors. Can’t wait to see the “tour” video to see what got yours up to 100 lbs.

Awesome work!

Very nice I like it a lot, however I would have put the draws on the bottom for better access and the stove up the top because you will less likely to be putting the stove in and out all the time.

Well done, Sir! Try putting a Weber gasgrill Q1000 on the camp kitchen. That Chuck box of Your would make it look VERY expensive 🙂

I love this! Any chance you’ll have plans available?

Thank you

Nice job, this looks amazing!

Just found this video. Excellent!! Any plans for this? Cut list?

Looking good! Any chance we can get the plans?

Very nice

Nice!!

Do you happen to have a cut list for this chick box? It’s absolutely perfect.

1 in 25 Americans suffers from hearing loss resulting from loud staining. Always wear your hearing protection.

very nice build! do u have plans for it?

I like it. Including contents, how heavy is it? To make it lighter, what would you sacrifice? In other words, would has the least weight to usefulness ratio?

i love it

Great video. Draw up some plans and sell them! I would pay some money for that.

Do you have written plans for purchase?

Do you have plans?

How is the pvc pipe attached to the cabinet at the bottom? Pressure fitted?

Could you provide the project drawing

Do you have plans for this build? I’d love to use with my Boy Scout troop if you’re willing to share!

How did the piano hinges work out for the doors? Were there any issues with the screws going into the edge of the plywood on the box? That came out great!

I love your videos! How come you don’t put out very many anymore? It seems like when you first went on KZfaq you put them out quite regularly. But now it may be 2,3,4,5 months between videos. Why??

Very complete and well done but how much does it weigh?

I love your build compared to the some of the other chuck boxes. How did you mount the pvc pipe in the back? Drilled holes or mounted a bracket? Wheels do seem like a good idea. I’ve watched hundreds of these videos and probably watch yours about 30 times. I’m looking forward to your review of your box (part 2) Thank you for using inches and feet.

Do you have plans for this

What are hidden doors called?

Valor de uma cozinha dessa como eu faço para comprar uma

Are there plans for this anywhere?

How tall should desk legs be?

The pocket screws should be on the outside not the inside. Otherwise looks good.

Gee just need 4000 dollars in shop tools then I too can build a chuck box!

How much will you charge to make me a Chuck box?

like that, but please go to the metric system, it is annoying for the rest of the world