Ultimate Drill Press Table with 3 Types of Dust Collection and Storage (with build plans)

Рет қаралды 127,021

4 жыл бұрын

Support What We Do at The Katz-Moses Store lddy.no/stih
In this week’s woodworking build we make the Ultimate Drill Press table with 3 ways to collect dust. I use a unique sliding table design to keep the dust collection working no matter where the fence is. There’s a dust collection wand, dust collection in the fence and the table. The table hole works as a vacuum hold down as well. There is a-track in the fence for the Katz-Moses Stop Block and a t-track in the table for hold downs. I really can’t wait to see what you create! Let me know what you’d like to see next. Thanks for watching! Please like, comment and subscribe. Cheers!
----
Tools Used, Discount Codes and Links
Step by Step Build Plans kmtools.com/collections/plans...
Dust Collection Hose Kit: amzn.to/2QiJhJh
Dust Collection T Fitting: amzn.to/2U7f6G5
Universal Dust Hose Mount: amzn.to/2QgqH4k
Red T-Track: amzn.to/2QAiw3l
The Katz-Moses Store (Suizan Saws, Stop Block, Dovetail Jig and more): lddy.no/stih
Bits and Bits: bit.ly/BitsBits USE CODE JKATZMOSES15 for 15% off
Astra Coated Mega Flush Trim (my favorite bit ever): Part#: W-UDC9112
¼ Spiral Flush Trim: Part#: W-RFTD2100
¼ Astra Coated Spiral Straight Bit: Part#: W-RU2100
Astra Coated Dovetail Bit: Part#: WD14-55
½” Astra Coated Compression Bit: Part#: 530-CM500
Total Boat Epoxy: bit.ly/2I3Q8m4 10% Discount code JKATZMO
----
Buy the Katz-Moses Magnetic Dovetail Jig: lddy.no/stiz
The Katz-Moses Woodworking Apron: lddy.no/stir
I have Walnut Slabs for sale: lddy.no/stj0
Buy the Katz-Moses Stop Block: lddy.no/stiz
BitsBits is the BEST place to buy router bits: bit.ly/BitsBits USE CODE JKATZMOSES15 for 15% off
Total Boat Epoxy: bit.ly/2I3Q8m4 10% Discount code JKATZMO
----
Essential Woodworking Skills Playlist: • Essential Woodworking ...
----
Woodworking Routers Video Playlist: • DIY Router Table Build...
----
Woodworking Joint of the Week Playlist: • Woodworking Joint of t...
----
Tool Tune Up Thursday Playlist: • Tool Tune Up Thursday
----
Check me out on social media:
jkatzmoses
www.Facebook.com/katzmoseswoodworking
patreon.com/katzmoseswoodworking
/ katzmoseswoodworkingshop
----
Tools I love:
The Katz-Moses Woodworking Apron: lddy.no/stir
My Favorite Dozuki Saw: lddy.no/stit
My Favorite Ryoba Saw: lddy.no/stiv
Marking Gauge: amzn.to/2nlXLuQ
Marking Knife: amzn.to/2nm39Ok
NEW Suizan Flush Trim Saw: lddy.no/stix
Stanley Sweetheart Chisels: amzn.to/2mVMTkF
Knew Concepts Fret Saw: amzn.to/2FUDbYZ
Dewalt Planer Package: amzn.to/2thEf6O
Forrest 10” Combo Blade: amzn.to/2Fdaee3
Festool Tape Measure: amzn.to/2oS3cjD
Starrett 6” Combination Square: amzn.to/2oP3dVw
Woodstock 3 in 1 Shoulder Plane: amzn.to/2FgAS1A
Stanley Low Angle Jack Plane: amzn.to/2oV4I4O
Dewaxed Shellac Flakes: amzn.to/2FeqqYh
Abalone Inlay :amzn.to/2rjMTxe
Abalone Inlay Alternate: goo.gl/DHonFy
5 Minute Epoxy: amzn.to/2FijsSa
Triton 3 ¼ hp Router (with built in lift and edge guide incl): amzn.to/2LBw3Go
Kreg Router Plate: amzn.to/2A7oVNC
Triton Bushing Set: amzn.to/2A7pSpa
Bosch 1 HP Colt Router Set With Fixed and Plunge Base: amzn.to/2mHP1wY
Bosch Edge Guide: amzn.to/2uRRKs2
Bosch Bushings Set: amzn.to/2JUNRYb
Centering Cone: amzn.to/2OjgOAf
MY CNC MACHINES (I highly recommend both)
Bescutter Laser’s Website: bit.ly/bescutter
Avid CNCs of all shapes and sizes: bit.ly/3cdKdqA
----
Camera Gear:
Lumix GH5-s and main lens: amzn.to/2J49F7m
30mm Macro Lens: amzn.to/2GJXtTT
15mm Lens: amzn.to/2NafUox
50mm Lens I use for product shots: amzn.to/2mehs5y
Microphone: amzn.to/2IGjKIa
Lav Microphone: amzn.to/2Nb8SzY
Gimbal: amzn.to/2s9ZV0F
2nd CAMERA Canon 70d: amzn.to/2FiCEDq
Tripod: amzn.to/2HasNvK
Slider: amzn.to/2oNucSd
24MM Wide Angle/Macro Lens: amzn.to/2oSzzjh
50MM f/1.8 for those tight shots: amzn.to/2tpAoVm
10-18mm Lens for the wide shots: amzn.to/2FZrhNM
Musicbed SyncID:
MB01DSRHVEV6ZPR

Пікірлер: 174

@katzmosestools 4 жыл бұрын

*Tools Used, Discount Codes and Links* *Step by Step Build Plans* kmtools.com/collections/plans/products/drill-press-table-build-plans *Dust Collection Hose Kit:* amzn.to/2QiJhJh *Dust Collection T Fitting:* amzn.to/2U7f6G5 *Universal Dust Hose Mount:* amzn.to/2QgqH4k *The Katz-Moses Store (Suizan Saws, Stop Block, Dovetail Jig and more):* bit.ly/KMWstore20 *Bits and Bits:* bit.ly/BitsBits USE CODE JKATZMOSES15 for 15% off Astra Coated Mega Flush Trim (my favorite bit ever): Part#: W-UDC9112 ¼ Spiral Flush Trim: Part#: W-RFTD2100 ¼ Astra Coated Spiral Straight Bit: Part#: W-RU2100 Astra Coated Dovetail Bit: Part#: WD14-55 ½” Astra Coated Compression Bit: Part#: 530-CM500 *Total Boat Epoxy:* bit.ly/2I3Q8m4 15% Discount code KATZMOSES

@camfarrell7508 4 жыл бұрын

Jonathan Katz-Moses do you have a file for sale for your cnc’d plywood corner jigs?

@rockbandgamer 4 жыл бұрын

That michael scott reference was seamlessly perfect lol.

@katzmosestools 4 жыл бұрын

Hahahaha so good

@JorgeSantosMoment 4 жыл бұрын

It was most certainly a thing of beauty.

@TheFPSCENTRAL 4 жыл бұрын

Jonathan Katz-Moses: top of the line tools everywhere and a very professionally built shop Also Jonathan Katz-Moses: black and decker jigsaw

@janitor6669 4 жыл бұрын

Next on the project list: dust collection for your plunge router ;)

@storylineamerica4108 4 жыл бұрын

Building it as we speak, or as I type, whatever, you know what I'm saying...Simplistic and fun build , can't wait to use it!

@kenerson_cc8144 4 жыл бұрын

You get my thumbs up for the “that’s what she said reference!” Just ordered two of your stop blocks and a dovetail guide earlier this week. They should arrive tomorrow, so stoked! Keep making sawdust, love what you’re doing!

@tmhirsch65 4 жыл бұрын

7:37 - It's snowing in Cali! Best design I've seen, it may even convince me to build a drill press table! Keep 'em coming.

@pat_link_ 4 жыл бұрын

Great video Jonathan a must make when I get around to building my new shop after the house renovation

@sebmstudio1697 4 жыл бұрын

Now I want a drill press even more... Well done sir, well done!

@danielallen2000 4 жыл бұрын

got the thumbs up for the LOL with Michael saying "that's what she said"! great job.

@learnchen3579 4 жыл бұрын

Very beautiful, learned, we do it by traditional techniques

@denisbeaudoinsr4979 4 жыл бұрын

Thanks for the great video! I've been wanting to do this with my drill press! Thanks , man!

@ganeshtn2098 4 жыл бұрын

Brilliant idea & multipurpose

@rhuynh 4 жыл бұрын

Another fantastic video and build. Thanks for sharing. I think grooving or putting a bunk of holes or grids into that middle replaceable plate will improve dust collection like a mini down draft table but with bigger holes for the curls. Love your videos!

@BeerCityWoodworking 4 жыл бұрын

Dust collection for the win!

@jeremypetix4493 3 жыл бұрын

Moses is using all these high quality tools then pull out the Black & Decker jigsaw. One of these things is not like the other!

@jamesmosley7794 4 жыл бұрын

I just came across this video of your drill press adjustable top. Now I am rethinking my project and installing drawers. I found two Craftsman work benches that need some work and a better top. I have a heavy desk top that is going across both benches at a 90 degrees. I was going to put in a simple 5 foot box for storage and built in lights. After seeing your drawers you built I going to change my plan around.

@freshpootube Жыл бұрын

"Did you make a start on those cupboards dear?" "No, but I have ANOTHER table, jig, bench, etc..."

@Fredrik3626 4 жыл бұрын

Thank You!

@scottmartin7717 4 жыл бұрын

God damn that thing is nice looking! Love the features too

@user-qg6fy4yp8t 4 жыл бұрын

Very beautiful project!!

@1jacksonryan 4 жыл бұрын

Love Danny D in the background!!!

@neilf4128 4 жыл бұрын

Now if you just build extendable side wings that slide out on square tubing, you will have the Ultimate Drill Press Table. Great job.

@mattbourne9671 4 жыл бұрын

Just the inspiration I needed! Lovely job

@katzmosestools 4 жыл бұрын

Thank you!

@benrudman3917 4 жыл бұрын

Nicely done man! Love it!

@murphymmc 4 жыл бұрын

Yep, one of the best shop builds I've seen. Excellent design Johnathan.

@katzmosestools 4 жыл бұрын

Thanks bud!

@MasterEjay 4 жыл бұрын

Love the b-roll

@bobtompkins825 4 жыл бұрын

Awesome build!

@FredMcIntyre 4 жыл бұрын

Turned out awesome Jonathan, great job! 😃👍🏻👊🏻 ..... Thanks for the info too, you really made baffling less baffling! 😉

@katzmosestools 4 жыл бұрын

Thanks Freddy!

@clydebalcom8252 4 жыл бұрын

Awesome build.

@patriotperspective9321 4 жыл бұрын

Another excellent video! You've been a huge help to me as a beginner!

@katzmosestools 4 жыл бұрын

I really appreciate it my friend!

@kenluning909 4 жыл бұрын

Very Nice Build. Really like it.

@SpencleyDesignCo 4 жыл бұрын

Just waiting for the day Danny becomes a real boy!

@dagragg 4 жыл бұрын

Very nice!

@LosBestauradores 4 жыл бұрын

Ey dude!! I really enjoy your explanations, and we have the same kind of footages too.. is amazing how we can enjoy the same work (woodworking) with cool camera shots, it turns the video very enjoyable.

@katzmosestools 4 жыл бұрын

Muchos gracias mi amigo. Me gusto tu canal. Mi espanol es malo jajaja

@LosBestauradores 4 жыл бұрын

@@katzmosestools hahahaha, as bad as My English??? It doesn't matter buddy, we speak with our hands the universal maker language 🤟😎... I'll be looking forward for more content

@kevinbetts6254 4 жыл бұрын

Great video and great music!

@hallowed45 4 жыл бұрын

i have that same track saw. a hose and some tape over hole on side and dust collection is Incredible

@katzmosestools 4 жыл бұрын

I love that thing

@ACR4008 4 жыл бұрын

Turning shavings into TP tutorial would really be your best shop project yet.

@indiegomontoya6496 4 жыл бұрын

Rob Cosman just did haha

@retiredrookie7146 4 жыл бұрын

Just checking in. Nice set up.

@ChrisHornberger Жыл бұрын

Beautifully done. I mean, that's no surprise to anyone, though, right? :)

@jeremypetix4493 3 жыл бұрын

Moses pulling out all these high priced tools then wipes out the B&D jigsaw! One of these things is not like the other! 😂

@SteveC38 4 жыл бұрын

Great Video Bud👍

@ronmichaelsen3983 4 жыл бұрын

Cool stuff!

@katzmosestools 4 жыл бұрын

Thanks Ron!

@mmcl1312 4 жыл бұрын

Looks sweet! I would love to see some working examples, particularly of how that sliding top is used.

@tonym2328 4 жыл бұрын

Same here, I am wondering what the benefit of that could be...

@BradsWorkbench 4 жыл бұрын

Nice build bud

@stelioskotsifos2227 3 жыл бұрын

8:51 are you saying that it's going to be the cherry on top???? Ba Dum Tsssssss!

@kevinshannon83 4 жыл бұрын

😂😂😂2.10, love it. Even if the project was bad (which it of course isn't! 😉) It's totally worth watching the video for that clip! Great work as always.

@katzmosestools 4 жыл бұрын

Lol

@solidsnake9332 4 жыл бұрын

Love your vibes man. Instant sub

@katzmosestools 4 жыл бұрын

Welcome my friend!

@Laz_Arus 2 жыл бұрын

09:23 As someone who is interested in horology in addition to woodworking, you have made a good choice with your SEIKO 5 SNK805 watch. 👍⌚

@kyleschmidt233 3 жыл бұрын

Hey Jonathan this table is great. Do you intend on putting a set of plans out for this at some point?

@petarjovicic3311 2 жыл бұрын

Wow

@shednut2666 4 жыл бұрын

Would have liked to see your plumbing for vacuum hoses Thanks for sharing

@katzmosestools 4 жыл бұрын

It did show it. It's just a 2.5" hole in the back left side and a tee fitting. The center cavity is where the air passes.

@tfwoodcraft Жыл бұрын

Looks awesome. I think I'll do a much slimmed down version for my bench top drill press. I need a wider table with a fence for that anyway. I just have a regular shopvac for dust collection, would I need to modify the air channel a whole lot since I probably have significantly less CFM?

@matthewford7840 4 жыл бұрын

I just came over here after seeing you on Farrington's channel. Your video is great. I really appreciate the editing and quality of work. Thanks!

@katzmosestools 4 жыл бұрын

Welcome my friend

@timothywhite6532 3 жыл бұрын

Newbie question here ... what is the purpose of the lower t-track that allows the upper table to slide foward & back?

@Wood_Slice 4 жыл бұрын

very nice looking saw dust hair gel @7:45 lol

@katzmosestools 4 жыл бұрын

hahahaha

@pfwoodworks Жыл бұрын

Great build. I’m just not clear of the advantage of the sliding top compared to having just the fence slide.

@AZ-Patriot 4 жыл бұрын

Look up 'Bernoulli's Law of Fluid Dynamics'. The Venturi effect. That's the principle you were trying to describe about the airflow at the beginning.

@katzmosestools 4 жыл бұрын

I will. Thank you

@jeffforbes3772 4 жыл бұрын

Very cool and timely. I've been wanting to make one but never found a design I liked. Thanks for posting. Wanted to tell you that if you give Danny a chance the next time he may be flipping the bird instead of the peace sign. Just sayin'...

@katzmosestools 4 жыл бұрын

Hahaha I want the one where he starts blasting

@jmmcotter1 3 жыл бұрын

Have you looked at a dust shroud typically used for hammer drills or angle grinders for silica dust collection? Might work better than your directed hose.

@TheLastPharm Жыл бұрын

Actually, your idea of a dust shroud is most likely THE best, most practical dust collection idea I've seen yet. I have the Festool OF1400 router and the dust shroud that comes with that would be perfect for a drill table application. You'd just need to fasten it to a piece of flat mdf or plywood or Plexiglas with an adequate hole cut out of it and go. I think it would work substantially better and in most if not all cases than anything I 've seen on KZfaq.

@TrevorDennis100 4 жыл бұрын

I love that table, and I also love that drill press. I have a drill press table on my to-do list, but mine is tiny compared to yours, and I won't have room for draws which means I probably won't be able to have an extract system beneath the table. That drill is crying out for a new chuck btw. I'm guessing it uses a #3 Morse taper, and a 16mm (5/8") keyless chuck is about US$50 on Amazon.

@katzmosestools 4 жыл бұрын

Watch my auction video. I got that drill press for $150

@SmallWorkshopGuy 4 жыл бұрын

Using that. Matchfit Dovetail Clamps to secure from the bottom was a genius idea - I might have seen that somewhere before - maybe, but can't remember where (hahaha). Now in the routing scene that was taking the "sawdust is man glitter" thing to the extreme! Great build. Just a couple of questions: I think my drill press table handle for raising and lowering might be hampered by the unit your built - how did that work out for the design of your drill press - okay, apparently? Having the large drawers on there, does that limit your ability to lower the drilling surface so you can put taller items under the bit? Maybe that is only a problem for the benchtop drill presses that most of us have.

@kenluning909 4 жыл бұрын

Howdy Danny !!!!!!

@timothywynne7025 4 жыл бұрын

Very nice. I know you are a pro but as a novice it would be helpful if I knew how long it took you to make a project. It would give me a baseline, something to shoot for after the quality is up to par. I enjoy all your videos. Thanks and keep 'em coming.

@katzmosestools 4 жыл бұрын

about 12 hours

@freddiedoyle472 3 жыл бұрын

Great project , I am disappointed the classics craftsman drill press is being replace . Threat thing wa cool !

@springjesse 4 жыл бұрын

Great build! Do you have a link to the hold down clamps you are using? I bought the t track you linked for my cross cut sled, but the power Tec hold down clamps I bought don't fit the t track. Most of what I'm finding is 5/16" 18 thread and I don't think any of them will work.

@davidglidewell1155 4 жыл бұрын

What is the squaring jig (5:08 in the video) made from? Cool design - are the holes just to lighten it up or are they for clamps? Seems like they would be great for square casework with clamps

@billmcallister7335 4 жыл бұрын

Just received your stop block for my crosscut sled. Game changer! Great stuff, keep up the good work.

@pbalcommissioner3879 4 жыл бұрын

With the zero clearance insert, could / would a “peg board” style insert work with dust collection like for sanding boxes, OR would the extra holes decrease collection??

@katzmosestools 4 жыл бұрын

It would cost nothing to test it. Could work

@Katmanish 4 жыл бұрын

Steve Carel, Danny DeVito, and Jonathan Katz-Moses in one video!

@katzmosestools 4 жыл бұрын

Another project that sucks

@SSBailey77845 Жыл бұрын

Hey JKM, I’m about to build your dust collecting drill press table. I know it’s been two years since you built yours, do you have any changes you would make after using for a while?

@Not_TVs_Frank 4 жыл бұрын

I'm making a _much_ smaller table and was thinking about a sliding insert routed with a dovetail bit. That would let it slide but not lift out. Any thoughts on that design? Thanks for the great video!

@katzmosestools 4 жыл бұрын

Sounds like you wouldn't be able to remove it. Not sure why you'd want that

@21area21 4 жыл бұрын

What is that production quality? Holy hell. And I'm loving the 4K.

@katzmosestools 4 жыл бұрын

Right!?! Marc crushes it!

@carmandr24 4 жыл бұрын

I really like this design, are there plans for sale in the works

@davearonow65 4 жыл бұрын

Lol. "Happy Little Accident". Shout out to Bob Ross. R.I.P.

@kevinmorley8119 4 жыл бұрын

Oh hi Danny.

@jimspring7434 4 жыл бұрын

Great looking table. Good job with the build video. Where did you get that thick block of cherry.

@katzmosestools 4 жыл бұрын

Thanks. Mayan Hardwood in Oxnard

@steveiv9250 3 жыл бұрын

Nice job, was that a Jess em router lift ?

@ssmorgan1978 4 жыл бұрын

Have you done a video on those corner blocks you use? Did you cut them on the CNC or by hand using the table saw?

@katzmosestools 4 жыл бұрын

I haven't. It's a design by fireball tools.

@1960fusion 2 жыл бұрын

i have the same drill press and it is a work horse, the only problem is that since the machine is moreo f a machinist drill press, the table doesn't have through holes to mount anything and there aren't many options other than clamping the new table to it.

@joejackson3490 3 жыл бұрын

Interesting design but could you add some demonstration of how to use it. Specifically, explain how to use the sliding/reversible insert.

@Fredrik3626 4 жыл бұрын

Hello there, I really like your drill press box. Could you please let me know where you get your red T-track? Thanks very much. Fredrik Thomas

@katzmosestools 4 жыл бұрын

Its linked in the pinned comment

@neilkaiser8492 4 жыл бұрын

Can you do a video over nails and nail guns? I noticed you used two different guns and nails. Since I just started in woodworking I Would love to find out proper use and application.

@katzmosestools 4 жыл бұрын

Good idea

@alyssa2242 Жыл бұрын

Did I just see you cut Aluminium T Track with a Ryoba?

@alejm8a 4 жыл бұрын

Quick question: I just bought my first drill press and wanted to make a table for it. It's a 12" bench top one. Doesn't making a table take up a bunch of the clearance on a drill press? Am I missing something? Maybe my drill press is so small that making a table for it doesn't make much sense.

@katzmosestools 4 жыл бұрын

It does. Mine has almost 5 feet of up and down travel though.

@laurenmichele94 Жыл бұрын

Is Pine Good for countertops?

@TheTranq 4 жыл бұрын

Hey Jonathan. What video editing software do you use? I'm interested in the ability where you add the text labels with lines to show what different items are

@katzmosestools 4 жыл бұрын

That's either done in premiere or after effects.

@TheTranq 4 жыл бұрын

@@katzmosestools Gotcha, thanks. Man premier is expensive!

@TheTranq 4 жыл бұрын

@@katzmosestools Lol, well I can get a free student license for 2 months before I graduate!

@goldendogwoodworks6675 4 жыл бұрын

How do you rate the Mikita track saw? I have been looking it vs the dewalt. Thanks

@katzmosestools 4 жыл бұрын

love it

@goldendogwoodworks6675 4 жыл бұрын

Jonathan Katz-Moses thank you, going to buy one now.

@EwokyBalboa 4 жыл бұрын

My drill press table doesn't have through holes/slots either and I was wondering how I'd attach a table that was still easily removable

@Not_TVs_Frank 4 жыл бұрын

I am making a small removable table for my tiny bench-top drill. Mine is basically a top, pieces to guide the steel table below, and caul-like clamps to grab the table. I loosen the knobs below and my table slides off. I've also got a simple fence that clamps on the top. It's nowhere near Jonathan's table, but my little drill would tip over with his beautiful beast of a table.

@katzmosestools 4 жыл бұрын

Those match fit clamps work great

@MichaeltheCrank 4 жыл бұрын

Aaaaaand, how do you adjust the table hight without dismounting the table?

@katzmosestools 4 жыл бұрын

There's a crank on the back. Very easy

@KolbWorkshop 4 жыл бұрын

i know the T-track is Al so it's fine, but it still hurts my soul to see you cut it with a japanese saw.

@katzmosestools 4 жыл бұрын

It's an old used blade I keep around for doing those kind of things

@NavinBetamax 4 жыл бұрын

All the blades in my shop are USED ones...and.....I don't abuse them !!!

@bryanmurrell7737 4 жыл бұрын

You would happen to have plans would ya?

@RandomViewer362 4 жыл бұрын

Why is the dust collection slot in the fence offset by 1/4 inch to the right? Am I missing something, it seems the insert would be easier to remove if the slot was centered with it.

@katzmosestools 4 жыл бұрын

We can't always be perfect

@RandomViewer362 4 жыл бұрын

@@katzmosestools Thanks for the reply, it's a great looking project anyway.

@andyjame1971 Жыл бұрын

This press has worked like a charm for my projects kzfaq.infoUgkxajoEbapTfqWaadnqb04h6U576yxXp-FE . I didn't even secure it to my table top, mainly due to the fact that I was using a 15 lbs drill vise. It's not flimsy at all as to what others have claimed it to be. Make sure the locking nuts and levers are secured and there won't be any issues with light pressure and patience. I was able to drill through aluminum, plastic, and steel (steel took a while) with no problems at all. Yeah it took a little longer than a regular drill press, but I don't have the space OR the money for one.The instruction manual was worthless, but luckily assembling the press was intuitive. However, the manual would be good for ordering replacement parts if needed. There is a nice breakdown of the parts that are included in the kit. Before ordering, make sure it is compatible with your unit, it is clearly stated what models the press is compatible with.This was an excellent purchase for $40!!

@WoodenItBeNice 4 жыл бұрын

Hi Jonathan, I really appreciate the workmanship and design in this project but for people with a benchtop drill press, it is not of any use. If you come up with one for a benchtop I would buy the plans if it would fit my small workshop. Cheers, Huw

@Norm7264 4 жыл бұрын

noting that, curiously, you don't seem to trust the fence scale on your SawStop TS... you are using a ruler to measure distance from the fence to the blade. Wondering why the fence scale isn't sufficient? Mine seems to be dead accurate, always.

@katzmosestools 4 жыл бұрын

It is a brand new saw so I hadn't even checked it yet BUT, I never trust anything but the thing I used to measure what I need. I.E. If I used my tape to measure the distance I need then I use my tape to measure on the tool I'm using to cut that. I (personally) can't stand being off by more than a 1/128. Drives me nuts.