Unbelievable Deal: The Most Affordable Twin-Engine Plane in the US!

Рет қаралды 309,728

Жыл бұрын

The Cheapest twin engine airplane has been sold and is gone :(
Awesome T-shirts here: www.SaveThe310.com
Facebook: / jimmys-world-104845438...
Instagram: / therealjimmysworld
View the Entire 310 Series: • I just Bought 3 Abando...
Other Abandoned Airplanes:
Abandoned for 20 years, Will it RUN? 1947 Bonanza V-Tail • Abandoned Airplane Wil...
Abandoned 7 Years, Can I get it running? 1968 Piper Aztec • Abandoned Airplane Wil...
10 Fastest Cheap Airplanes You Can Buy For Your Family • 10 Fastest Cheap Airpl...
10 Fighter Jets You Can Buy! • 10 Private Fighter Jet...
For Business/Media: therealjimmysworld@gmail.com

Пікірлер: 477

@DennisDay58 Жыл бұрын

I like it how you get the factory to show their processes. Thank you!

@AvStevieStevenJamesDrums Жыл бұрын

And I didn’t think I’d hear “Can I get a Clear Prop” but you didn’t fail Jimmy.

@TomPauls007 Жыл бұрын

That mag rebuild was riveting! Super detailed work. Plane may break down, but the mags will live on!!

@RealRickCox Жыл бұрын

I thought the riveting was what you did when you worked on the skin of an airplane...

@UncleKennysPlace Жыл бұрын

Mags are shaky relics of the past. None "live on" for long, even new ones.

@TomPauls007 Жыл бұрын

@@UncleKennysPlace I doubt very much my humorous comment had technical relevancy. (riveting... etc.)

@adriaba790 Жыл бұрын

🤣

@alexdarcydestsimon3767 Жыл бұрын

@@UncleKennysPlace especially not new ones. ;-)

@Conn653 Жыл бұрын

LOVE the Apache! It's like a DC-3, if the cargo can get in the door, the plane will fly! Period! Guess that's why the big brother Aztec was built 🙂

@ConvairDart106 Жыл бұрын

Go ahead and load it to gross. Lose an engine, and the remaining 150 horses will take you to the crash site!

@buckmurdock2500 Жыл бұрын

I thought the Aztec was built because the Apache was so slow it couldn't get out of it's own way.

@johnregan3732 Жыл бұрын

Aztruck!

@bernardc2553 Жыл бұрын

There a Great Plane

@frostyfrost4094 Жыл бұрын

Geronimo's are rare in Europe they need to be appreciated

@tomandpeg4818 Жыл бұрын

Jimmy, this could be the best episode to date. (seen them all).Nice to see where all the money goes. Keep up the good work

@johnnunn8688 Жыл бұрын

Never wear a finger ring, while working. Almost lost my ring finger, plus it’s a conductor.

@oneninerniner3427 Жыл бұрын

True that, I also found out the hard way!

@dennisowen3717 Жыл бұрын

As a Retired Aircraft Mechanic I can tell you the significant attention do detail and perfection was unbeleivable. We knew that people's lives were in our hands. Screw ups and screw off's were not tolerated. I hated those Nylon gears that were used on the Mags. So why did you have to sell it Jimmy. The Dude that got it was one lucky Buck. Anyway, I really do miss working on them. But now I just work on old Cars and Trucks.

@thomas7770 Жыл бұрын

Good thing there is absolutely no screwing off on Jimmy’s channel. Only seriousness.

@johnnunn8688 Жыл бұрын

What is your problem, with the nylon gears?

@dustoff1472 Жыл бұрын

Aircraft mechanic’s are very special people. I’m a retired Army pilot and always always appreciated their hard work and dedication. Respect. Thank you for your service.

@johndenton5555 Жыл бұрын

@@johnnunn8688 they blow under loads that metal gears just wear a bit more on, that's kinda handy up in the air.

@johnnunn8688 Жыл бұрын

@@johndenton5555 are nylon gears still fitted to new/recon mags? (I’m a gas turbine Eng, so little mag experience)

@Michagan_outdoorsman_James Жыл бұрын

holly camshaft in the caprice batman !!! sounds mean 😊😊

@straybullitt Жыл бұрын

Jimmy has a 4 door Corvette!

@dougpartington1843 Жыл бұрын

The Apache was the first twin engine plane I flew. I'm glad you found a buyer for it.

@davedennis6042 Жыл бұрын

Jimmy, this was one of your best videos. Watching those guys build those mags was amazing. They make it look so easy. But I love your channel. Always interesting content.

@jayoneill1533 Жыл бұрын

It was absolutely fascinating to watch the mag rebuild. If I was the new buyer I would be very impressed, great selling tool.

@omarjohnson3411 Жыл бұрын

Loved the mag rebuild. Never get to see that side, always write a check, write a check and repeat till installed. Then it's whip out the ole credit card for go-go juice, cause bank account is now empty! Keep up the great work!

@michaeljohn8905 Жыл бұрын

The mag test part was the coolest and best part for an apprentice A&P like myself.

@jemmrich Жыл бұрын

I love these rebuild videos.. i could watch them in real time all day long.. so satisfying!

@deanhayes2977 Жыл бұрын

having worked in the automobile industry as a powder coater/ wetspayer. the parts had to be sandblasted before being coated so that the paint adheres to the parts so that the paint does not peel off the parts

@johnnunn8688 Жыл бұрын

Trust me, sand isn’t used.

@spammerscammer Жыл бұрын

Just say media. Sand is a blanket term when it comes to media blasting but using any silicate on aluminum is a bad idea. Hazelnut shell or EpiX if your feeling fancy or if it's not your money. 😂😂 Definitely not sand.

@jochentreitel7397 Жыл бұрын

These work tables are greatly organized and clean throughout the process. That builds confidence. Great detailed video.

@retiche Жыл бұрын

That's insanely beautiful what those guys did! Love their work!

@Oldman5261 Жыл бұрын

Great video. Your attention to detail is amazing. Keep up the good work!

@scene24man Жыл бұрын

*$600 a set for plug wires?!?!* I need to get into the aviation parts supply business.

@desotosky1372 Жыл бұрын

Medical is worse....$600 for a broken plastic shield from Siemens. $50 from local plastics company.

@eddierichardson4205 Жыл бұрын

Keep them coming man. Love your channel! From London Kentucky.😀

@petergregorypottery5476 Жыл бұрын

Really enjoyed this episode, it was fascinating o see the rebuilding of the magneto, and good to be back with fixing, flying and rebuilding aircraft!

@gcarlson622 Жыл бұрын

I have to admit, I liked the Apache a whole lot more than I will ever like the Elvis airplane.

@pahoskins Жыл бұрын

Since it was airplane stuff, I thought I'd watch a few minutes but I was riveted until the end! Now I know why my mag repairs those years ago cost so much. Great video. Camera work in the factory was awesome too! Thanks for posting .

@Slushers1 Жыл бұрын

Jimmy sent you a KZfaq link to the Elvis plane you bought. Interesting history. 👍😁

@zachrowan3635 Жыл бұрын

The “black stuff” that your referencing at 4:48 is just lacquer thinner that I pour in a cap so I’m not constantly using the bottle and so I can clean with the q-tips faster.

@jvmalta081 Жыл бұрын

its been a while ! glad to see you back :)

@ericdouglas9804 Жыл бұрын

I guess you never read the comments but there is a really nice’66 Bonanza for sale at M91. Part 35 compliant , always hangered; great flying plane and spent a few hours in it when I was flying. There is also a great “ bone yard” at M91 but I’m not sure of the name. Back when I was flying M91 statically had the cheapest fuel in the area. If you are interested in the Bonanza just let me know.

@darincampbell8851 5 ай бұрын

Fantastic video only half way through and I am amazed at just how professional these people are. Great job....and yeah explains why parts are so dear!

@davidpoll220 Жыл бұрын

That mag rebuild was pretty cool. Love that. The new owners will have a sweet little ride

@chrish5590 Жыл бұрын

Love the work Jimmy

@gobfranklin6759 Жыл бұрын

Great job on the rebuilding of the parts! Thanks!

@larrysouthern5098 Жыл бұрын

At 20:15... Happy trails to you 🎶 Until we meet again 🎶 .....so long my old and trusted friend....

@diosanto2022nuevomundo. Жыл бұрын

Muy lindo hermoso trabajo .. Un aeroplano estupendo .. Saludos desde Uruguay

@johnfitzpatrick2469 Жыл бұрын

G,day Jimmy's world from Sydney Australia. Thank you for the great episode and amazing technology content: such as the visit to specialist Magneto shop and repairer. Must say: a little nervous about the short grass RWY for the first maintenance test flight. Especially major stuff like cylinders, mags, control surfaces. Tally-ho 🌏🛩️

@shaunwalker2055 Жыл бұрын

That Caprice was talkin back! Nice

@tisAndyyy Жыл бұрын

Jimmy! I love videos like this - more please if possible!

@wstlndiesel Жыл бұрын

Love your channel Jimmy! Appreciate all you do.

@mariemccann5895 Жыл бұрын

Strangely awesome video. Thanks for posting.

@scotabot7826 Жыл бұрын

Jimbo livin the Pilots dream!!! I admire you man, and if I'm honest with myself, a little jealous! Can't wait for more!!

@savethehumans7460 Жыл бұрын

That car in the beginning sounded very healthy! Thanks for the share.

@1425race Жыл бұрын

Great to see you back doing what you do best fixing and flying old planes. Hope your finances recover after that disaster red thing. What happened to that Mig you were looking at?

@danielwirth8388 Жыл бұрын

very interesting love this video wish there was more about the process . Thanks Jimmy

@ForTheLoveOfRightRudder Жыл бұрын

Love that Apache. Great video Jimmy 😊

@blessOTMA Жыл бұрын

Really enjoy your vids! Rock on, Jimmy!👍

@gawebm Жыл бұрын

The Apaches are such cool looking aircraft! Cool vid of the mag rebuild!

@ronaldbrantley6795 Жыл бұрын

More videos cant seem to get enough Jimmys World activities.

@donniev8181 Жыл бұрын

Really liked the rebuild and sell type video, look forward to watching you sell another.

@johnwebber3943 Ай бұрын

Hey Jimmy, after watching every one of your videos, and knowing how meticulous you are about every aspect of making sure an airplane is air worthy, I would buy any rebuilt aircraft from you. When I'm ready to buy my plane, I'm coming to see you first! Keep the videos coming, they have taught me a lot about the mechanics of an airplane. Thanks!

@tony66au Жыл бұрын

Awesome to see Jesse onboard! Silver Bullet time :-)

@allanlugo8095 Жыл бұрын

Very good..I didn't hear " can we get a clear prop?" I do enjoy your videos

@GSteel-rh9iu Жыл бұрын

That was an amazing rebuild video!

@lefullhouse 11 ай бұрын

ComieFornia! I love it. How many people heard that?

@lancewilliams5726 Жыл бұрын

That cam sounds awesome

@landrelarose745 Жыл бұрын

Jimmy, that black substance seals the less perfect surface of those parts. When they didn't put it on those surfaces, any liquid that touches those two parts will go into the cavity and destroy that magneto. This would mean you'll need to buy another one of them. That black layer is called a sealant. I believe it aviation grade, specifically formulated aircraft components, such as that magneto.

@JohnWilliamCornett 11 ай бұрын

Nice! Thanks James.

@caraanderson4411 Жыл бұрын

I’m terrified of flying but I love your videos!!

@doug440 7 ай бұрын

I really enjoyed watching that magneto overhaul. As a mechanic, it brought back fond memories of doing that in A&P school. Specifically when I used safety wire and hooked up the mag output from the tester to my classmates chairs and let the sparks fly. I know, you might be thinking “Don’t Be Cruel” but I sure enjoyed watching them “All Shook Up“.

@jasonpatterson947 Жыл бұрын

Dang Jimmy....... Seen you on MSN cover story on the Elvis jet... Great job brother !!!!!!

@wildcoyote34 Жыл бұрын

yet another great video ,,the Apache is a pretty sweet bird ,, i just went through my annual with my seneca and i think i did just about everything you just did ,,i don't have the fancy electronic mags but i just had mine rebuilt about 50 hours ago ,,both of my engines have about 500 hours since their last major overhaul ,,most of what i did was repair glitchy crap like that wire you fixed on the apache ,,i replaced all the wiring to everything in the wings ,found too many corroded wires of course it's a 45 year old bird in iowa

@SammyTheDitchDoctor Жыл бұрын

It’s amazing how many companies are using those vapor hone machines. They really are cool!!

@mydronelife9871 Жыл бұрын

Absolutely love this video

@FeltonZackery-gm8yl Жыл бұрын

The magneto rebuild AWESOME!

@lyfandeth Жыл бұрын

Nice CLEAN SHOP that did those rebuilds. Even to the red flooring paper he had down instead of a workplace mat, so it could alwags be replaced after grimy use.

@IslandBoy958 11 ай бұрын

Fantastic looking aircraft

@daniletsplay1 Жыл бұрын

Hello Jimmy! Love ur Videos❤ 😊

@ferebeefamily Жыл бұрын

Thank you Jimmy.

@AlteredCarbons Жыл бұрын

i love single engine planes.. but NOTHING will beat the beauty of a twin engine plane.

@Watson1 Жыл бұрын

That video is a replacement for my morphine patch. I need one every week, so I can say to my doctor, no thank you, I just saw Jimmy’s latest video. You’re a breath of fresh air old son. If I could subscribe more than once, I would. Till next time, cheers Wiz

@ClearedAsFiled Жыл бұрын

LMAO......

@billness1417 Жыл бұрын

That car sounds awesome. Cool plane too.

@Jjengering Жыл бұрын

It's an absolute dream of mine to own a light twin, but here in the UK, general aviation is just so expensive compared to the US it's just not feasible. Thanks for sharing with us. I love seeing the care that goes in to servicing these beautiful aircraft, they know how critical Thier work is.

@tylerhall66 Жыл бұрын

Why would it be any different than the USA and many people fly jets twins and everything in between because it is feasible for them. They didn’t get born into money, they made it happen themselves. Anyone can do it

@allanweseman5433 3 ай бұрын

I am just an old retired auto mechanic. It is understandable that ignition in a aircraft is a big deal, and the FAA insists on a rather short service interval on magnetos for a rebuild. I want to know if you have ever heard of a magneto ignition failure in flight. I realize the aircraft is double sparked but you would still be able to tell if one magneto was inoperative.

@ryanhell921 Жыл бұрын

Cool video bro! Old army dog here, road in the UH 60's a bit🤗 keep em' coming Wing Nut😁

@x1can0 Ай бұрын

Jimmy. Great channel. Good Job.

@davidkolman5591 Жыл бұрын

Great work!

@caraanderson4411 Жыл бұрын

Can’t wait to hear more about the Elvis plane!!! Jeff

@VenturiLife Жыл бұрын

I once fitted silicon spark plug racing wires to a 4-cyl car. I think they cost me $200-300. Got to remind them about the "Clear Prop! " shout, it's just good airmanship too.

@jonathanmorgan611 Жыл бұрын

I love that you have the overhaul video. The ghost of Ben Franklin would be so proud

@tracynichols7206 Жыл бұрын

Cool fire test

@josephcatano4705 Жыл бұрын

Haha that intro with the car exhaust/music choice has me wanting to watch Blues Brothers.

@davidmangold1838 Жыл бұрын

Great showing how QAA rebuild! What a process-that I’ll never do myself🥴

@floridaripper817 7 ай бұрын

Geeze 600 for ignition wires. Thats crazy. I grew up in a mechanic and towing shop. Enjoy working on everything. I like the crucialness 😂 of detail on aircraft. You cant be told you were to carefull or going to far. You need all the datails. Good job jimmy 👏

@ronsykes4078 9 ай бұрын

Love watching your channel but I'd surely like to know more about that cammed out caprice. OMG!! It sounds amazing

@byronholt4912 Жыл бұрын

That Caprice was CHOPPING!

@jeff_d1 Жыл бұрын

Seems like a fun place to work, tons of excitement and lots of chitchat going on 😂

@CapnBubbaa Жыл бұрын

Jim & Jesse, the "A Team"!!

@hanxstiff5760 Жыл бұрын

Jesse seems like a fun Dude.

@gunhunters Жыл бұрын

Hi Jimmy, Great Videos!!!!

@clarencehopkins7832 Жыл бұрын

Excellent stuff bro

@billpennymcnally226 6 ай бұрын

I really enjoy the video's jimmy regards from the Apple isle in Tasmania

@perryjohnson8213 Жыл бұрын

They don’t build them like they used to. Super pilot friendly aircraft to fly, love the Apache!!

@squishy312 Жыл бұрын

Glad they could make those mags great again.

@michaelinorlando8507 Жыл бұрын

Great plane. Gonna miss it. Moving on.

@brucemabley9808 Жыл бұрын

Hello nice job on Delta Papa kudos

@boobalew Жыл бұрын

Awesome, Jimmy!!!

@boostbeast8731 8 ай бұрын

Once i saw the cammed ppv i knew you were a man of elegant taste.

@bonza6451 Жыл бұрын

I see you like your aussie cars!

@TerryLawrence001 Жыл бұрын

I heard Hamiltonville Farm say "Can I get a clear prop!" as they started a big diesel 🙂

@Take20DnD Жыл бұрын

Jimmy , could you put a back up cam under a plane to ensure gear up/down. Was watching the great under belly camera footage from the Oshkosh video. Good stuff 🙂👍