UNBELIEVABLY RESTORE! PANASONIC TELEVISION 1990s - RESTORATION ANTIQUE ANCIENT PANASONIC COLOR TV

Рет қаралды 41,265

Viral Life Fisher

4 жыл бұрын

Пікірлер: 38

@fmbroadcast Жыл бұрын

Wooow beautiful 😍

@brendmobile3049 2 жыл бұрын

You are great

@ilkerbal2882 2 жыл бұрын

Süper lo

@telepathy90 4 жыл бұрын

Absolutely fascinating

@notmasterdelectronics 3 жыл бұрын

It's not antique since it's not that old but it's vintage. Cool vid!

@maravilhasdaeletronica6673 2 жыл бұрын

Hello friends, take a look at my old fan rescue and restoration video. Subscribe to my channel, hugs.

@brendmobile3049 2 жыл бұрын

Thank you. Viral you are great

@jvargas6034 2 жыл бұрын

Why Do People Throw Their Old TVs Around And Abandon Them

@phamngocvinh1339 3 жыл бұрын

Tuyệt vời CRT

@user-ov2bg9uo3t 3 жыл бұрын

Класс!!!

@maravilhasdaeletronica6673 2 жыл бұрын

Hello friends, take a look at my old fan rescue and restoration video. Subscribe to my channel, hugs.

@maurofort4044 3 жыл бұрын

Bien hay capo saludos desde Argentina

@ViralLifeFisher 3 жыл бұрын

gracias!

@jailsonfragoso6684 3 жыл бұрын

👍

@Drizzle589 2 жыл бұрын

WHY DIDNT YOU PUT ON THE BACK EARLIER

@petslover-r3w 4 жыл бұрын

Cool

@ViralLifeFisher 3 жыл бұрын

Thanks!

@alfredoneriayala4457 3 жыл бұрын

Estupendo, saludos desde México.

@maravilhasdaeletronica6673 2 жыл бұрын

Hello friends, take a look at my old fan rescue and restoration video. Subscribe to my channel, hugs.

@bevee8776 3 жыл бұрын

How electronic works after several washing from water it's unbelievable 💤💤💤

@ViralLifeFisher 3 жыл бұрын

It's possible, this video is not fake

@estebanmartinez4410 3 жыл бұрын

electronics can work...but the life of each part its like 80% less.... but it can work if you let them dry few days or using something to dry it

@xthechar 3 жыл бұрын

@@estebanmartinez4410 Water shouldn't damage computer parts at all as long as they're not powered on or charged when they're wet (and as long as you don't blast it so hard with the water to damage it with force)! The key is to make 100% sure it's dry before turning it back on in any way. Some people wash arcade machine boards in the dishwasher and then bake it in the oven at very low temperature to make sure it's dry!

@lozo2364 Жыл бұрын

สนอม เตอ

@slavaslava4820 3 жыл бұрын

Мыть кинескоп не снимая отклоняющую систему и

@EriceRocky1 3 жыл бұрын

Last year, your region still didn't have a digital signal?

@fairussukarno1400 2 жыл бұрын

Maybe, but crt able to receive digital signal

@stevesje71 3 жыл бұрын

This is not the way it should be done. Also the cabinets will be damaged washing it on the concrete floor!

@GothKid1996 3 жыл бұрын

I wonder what country still is using the analog ntsc broadcasting and why?????????????

@mlcadentakpodeh Жыл бұрын

Thailand

@lulkLogan 3 жыл бұрын

Aren't you supposed to put some type of non-conductive grease under the anode cap?

@notmasterdelectronics 3 жыл бұрын

No, why?

@stevesje71 3 жыл бұрын

Yes you are to stop tracking

@tsd550 3 жыл бұрын

@@stevesje71 Silicone grease was only necessary on models where the EHT ‘flower’ was made of a less flexible plastic such as PVC, which often was not flexible enough to provide a good seal against damp in general and condensation in particular. Japanese models almost always had ‘flowers ‘ made from a far softer and more flexible material, possibly silicone rubber . This made for a far better seal that did not need silicone grease to moisture proof the EHT connector. Not sure any manufacturer ever applied silicone grease as a moisture proof measure during production. It was usually a last resort to try to stop the arcing that could easily be mistaken for gun fire!

@stevesje71 3 жыл бұрын

@@tsd550 the hundreds of Sony’s I’ve repaired that have flexible rubber caps but still with silicon grease. I’ve seen it on all types of cap