Ur lucky m8 Wish Canada wasn't as bad as Australia in terms of airsoft

do they ship to the us? I’m looking into buying this from their website

@@masemick yes they do

Run in there with the usp.45 modern warfare 2 memories

@@paperbackwriter... UMP 45🙏!! UMP NOT USP!! USP is a Pistol 🤣

IamNotLegend IK that

@@iamnotlegend_8879 Looks like you never played MW2..

I am literally in the exact same predicament now, curious which one you went for?

@@woodcutterj7 I actually did not end up with this platform in the end but its newer brother so to say. The UTR 45, which is amazing and I would really recommend.

Glad I could help! Pheas

@@PheasAirsoft woah, and u even answer. Amazing Quick respons. Thanks.. have a great night! Much love mikey

@@Mikkellol160 well I wouldn't be where I am without people viewing and commenting. So it's nice to speak to the people that take their time to watch my videos and comment on them! I'll go back to my beer and umbrella academy S2 now! Pheas

@@PheasAirsoft You are absolutely right. and I appreciate a guy, who appreciates his viewers.. - and haha, enjoy your beer, never seen umbrella academy -should maybe giv'it a go? :D -Mikey

Thank you for the feedback. It's still a work in progress. I'm trying to get a bit of land to set up a bit of a range with targets every 5 or 10 meters out to about 80meters. That's the next big thing I want to do with the channel... So if you happen to be in Yorkshire and have some land... Ha ha. Thanks! Pheas

@@PheasAirsoft HAHA love the joke mate I would love to live there.I only have a smaller range but only in Hungary so thats maybe out of the question. :D . So keep up the good work. I love it when you take apart rare guns because well they are rare so not many disassembly videos you can find here. :D

Thanks man! I really appreciate that!! Pheas

I do love running a set of mids for any gun, it should take the g&g mid caps quite happily if that helps? Not sure if they are still available or not though. Pheas

The only reason I don't own either this, FAL or Galil is lack of midcaps for these, or lack of avliability of those... Technically there midcaps for Cyma Galil, but those need work to make them fit (no, unlike ICS it DOESN'T take AK mags) "dedicated RIF" - it being kinda dated doesn't help either (TM/potmetal construction)...

you can buy classic army 100rd mid caps for 21 each

@@MatthewDoesStuffRC Not avliable in Poland - and abroad shipping would be too much of a stretch...

@@MatthewDoesStuffRC are they the same fitting? I thought only the g&g ones were compatible? Would love for the classic army ones to fit too. Pheas

Hello, I don't think there is a 14mm adapter from what I can remember, G&G used to do a specific supressor for it (QD I think) as this is based on the G&G model. But not idea if its still available. Pheas

Hello! I have had thousands of pounds worth of stuff from them over the years with no issues. At the moment they don't ship to the UK due to issues with UPS and not handling impoting post brexit properly, so if you are in the UK its a case of sit and wait, if you are in the US or most of the rest of the EU then its game on for you! Pheas

Hiya. If you can find them it will take / use the G&G UMP magazines as well. You can also get the Double Eagle mags still from some retailers. Pheas

Hello! It should in theory take any M4/ AR mags. I would guess CYMA are a safe bet as would The TM ones but they will be expensive. Hope that helps. Pheas

The one in the video isn't that tbh worth the price

Hello, it is a clone of the G&G one, so should / will take the G&G umg mags as well as double eagles own mags. Pheas

It's one of those ones that it is similar in colour to the actual real steel one, but it's not the best of guns. For the price it's ok but defo needs a little bit of work! Nice to hear from you though! It's the M16 next week! Pheas

12pm (UK time) Friday and the disassembly goes live for you to have a look at ! Pheas

@@PheasAirsoft please do as G&G have discontinued everything to do with their version from what the chinenglish said

G&again combat machine m16 raider. Best gun for the price

Noa Geer thanks it’s a bit over my budget though I have £100 around there. I know the cyma. 506 is good for its price because pheas done an unboxing of it but I just kinda wanna know if there are any better guns around the £100 and less mark

@@paperbackwriter... Most cyma m4s/aks should be good. I have the 513 i got pre-two toned for £95, it's pretty damn good. www.bespokeairsoft.co.uk/airsoft-gun/two-tone-airsoft-guns/cyma-m4-aeg-inbuilt-silencer-black-cm513-blue Pheas also did a deconstruction of it and remarked the Blue plastic in the 513s gearbox may be stronger than the clear stuff used in others, though i honestly don't know. The only thing I'd advise outright against for around £100 would be the DE M4 with the grenade launcher. Although it seems pretty damn cool, it has a plastic gearbox, so it won't last as long as the other rifles you could buy. As for your age, most sites I've seen allow 12 year olds or up to play, though you need extra protection usually (Full face, which you should wear anyway)

@@B_-.- thanks for the info it’s nice to see someone going on depth explaining stuff like what you’ve just done. It’s why I enjoy pheas’s content a lot to.

Hiya, It will need to be the stick type batteries or nothing, unless you rewire (and modify the body to allow it) to the front and fit a battery box. Pheas

Hiya. Putting an 11.1v in any gearbox will increase the wear it takes and reduce the time before it needs a repair job, that said I have had brand new guns from all sorts of brands that have broken very very quickly out of the box on a 7.4v. As they are mechanical they will need repairing at some point anyways. The 11.1v will just bring it about a little quicker, but its anyones guess on how much quicker. Someone I play with has a cm.513 and has been running it on nothing but an 11.1v and it is still going strong aft 15k bbs, my sons 506 has needed a piston in the same amount of time but only running 7.4v. Pheas

@@PheasAirsoft how about the trigger contacts??

@@casinodelonge They will certainly get "burnt" quicker than with a 7.4v but will certainly run happily for a considerable amount of time until that becomes an issue. If you installed a mosfet it completely stops any trigger arching (burn) altogether. Pheas

@@PheasAirsoft cool, you hear so many horror stories that AEG's only have to look at an 11.1 to burst into flames.

Hello! I don't actually know if anyone makes one. But it is a clone of the G&G one so if you can find a drum for that, then you can use it. Pheas

Hiya, the full disassembly goes live on Friday, but unfortunately no, there isn't a thread under the muzzle break... Real shame to be honest! Pheas

plastic

The real gun is plastic as well so it’s realistic

Hello! Is this with midcaps or the included high cap? Do any bbs come out at all? Pheas

@Pheas Airsoft I have figured out the problem and fixed it. Thanks for responding though love the videos keep up the great work

@@MontagesAndParkour what was the problem in the end? Pheas

@@PheasAirsoft I forgot to winde the magazine 😅

@@MontagesAndParkour Outstanding! At least it was something really simple and easy..

Brand new from the factory between 330 and 380 fps., Pheas

Hello! I dont think the umarex ones are, but the G&G ones certainly do fit as its a clone of that one. Pheas

@@PheasAirsoft thanks mate, keep up the good work!

Hiya. It is the dedicate3d UMP magazine. This gun and mag is a clone of the G&G UMP so would use the same mags, but they are not compatible with the MP5. In real life they would be .45 ACP calibre mags. However Cyma are releasing MP5 mags that look like this,Taiwan gun will have them by the end of the month, if not already in stock. Pheas

Hiya at the moment on taiwan gun they £83 to buy. Hope that helps. Pheas

I'm not at home this evening (but someone is at home) if you can hold on, I'll get someone to measure it and come back to you! Pheas

Thanks for letting me know. I'll tone the volume down a tad in future. Pheas

@@PheasAirsoft Thanks for taking us viewers in consideration, as always keep up the great content!

Hiya! I would consider it, but like any gun it will put it under more duress so likely to break sooner rather than later. BUT that gives you an excuse to upgrade the hell out of it! Pheas

@@PheasAirsoft thank you for the response i will probably buy the battery then

@@PheasAirsoft what would you up grade to get the beat out of the gun

@@harrisonscott4899 Hiya. For the range.. I would get a tight bore barrel and a maple leaf MR hop rubber (had outstanding results from these, they can be a little picky about feeding in some set ups, but worth it if it does work) then if you play a lot in single shot then a high torque motor would make it snappy on single shot, if you want more rate of fire instead then j would look for a high speed motor. The gears are decent enough, maybe just have someone check the shimming to see if there is improvement could be made, but that's not essential. Hope that helps. Pheas

@@PheasAirsoft thank you