to and extent, but still very sad to see this, ig this is what happens when you cant keep up with production that you back logged so farbehind
@teh_realdeadpoole90362 жыл бұрын
Keep us posted on the customer service response! Love the KZfaq vids, btw
@tuttah2 жыл бұрын
Merlin was getting berated in the KC discord after this stream. Specifically about the fact that their QC standard states these "unseen blemishes" are considered acceptable. This was after he made the comparison that he hasn't seen something like this from KBDfans boards lol. IMHO thats a rough look for such a "premium" board, you wouldn't expect them to fall back on their QC standards so hard. Just cause those areas aren't seen when in use doesn't mean they should look that brutal
@tuttah2 жыл бұрын
@Dexter yea thats what really stood out to me, of all the streams/ vids I've seen on keeb builds I've never seen something in that state
@AbyssalDepth12 жыл бұрын
that's because the keycult discord is potentially one of the most toxic, always-online meatrider servers in the keeb community. I am a huge fan of keycult overall (this is actually quite a surprising and a little disheartening video) but that server is legitimately one of the worst online interactions I've ever had in my life
@nicquintana10922 жыл бұрын
@@AbyssalDepth1 ok
@dennishamilton80092 жыл бұрын
@@nicquintana1092 it is true though
@chunkymilk1288 Жыл бұрын
@@AbyssalDepth1 I think most maker discords are just toxic environments full of meatriders begging for preferential treatment through extreme shilling
@dannythomas7784Ай бұрын
that brass is worse than my diy brass weight 😂😂😂
@qscorner2 жыл бұрын
Hey Merlin - I see GMK Hammerhead on that keyboard on your desk (the Angle Vertex I think) - did you get the Dark set? If so might we see how that looks on that board? 😬
@SweatyHanes2 жыл бұрын
Bar keepers friend will certainly clean that brass up and not leave a residue or streaks.
@okand37582 жыл бұрын
Ah... You got the co-vid stock.... which is basically B-stock....... my condolences...
@abelwoo Жыл бұрын
Omg 😱 the brass
@lovemormus Жыл бұрын
recent reddit post brought me here!
@MechMerlin Жыл бұрын
Oooh which one?
@dylanc6171 Жыл бұрын
There’s a thread called “keycult’s commission scam” and I also saw a comment to come see your unboxing….
@neogem2002 жыл бұрын
Oh wow, Merlin was excited to see you finally get a Keycult but the brass weight is outright horrible I would expect that quality for B or C stock boards, but when you pay 600 and wait almost a year and a half that is not a product that should have been sent out.
@Donbros2 жыл бұрын
"If its not visible its fine" not expected this moto from keycult. Love their boards and want to grab one but hope they won't do another qc mistake like this. I mean tbh its fine built but again 600 usd could let make better board. Also I think its their chinese board not new USA in house made. Though it had quality regardless very strange. All in all om outside it looks nice but that qc sadge
@jridgii2 жыл бұрын
@@Donbros For some additional background, the TKL no1 rev 2 was the first (and likely last) wide release of a Keycult board offering an uncoated mirror-polished brass finish. One of the KC discord keepers (i.e., paid mods) mentioned that Jorge was unhappy with the factory delivered finish of the polished brass mid sections and was touching up the visible portions of those by hand. Some amount of inner blemishing is the trade off for the uncoated mirror finish, and at least some of it is leftover residue from the polishing compound - as using a cleaner to clear up the non-visible portions of the mid would risk tarnishing the visible mirror finish. I don't want to just give KC a pass for things like the streaking/vertical line on the top of the mid, but from what I understand, the non-visible portions of the bottom and sides of the mid in particular are going to be compromised by the nature of the finish on the visible portion. That all said, I assume Keycult will offer MechMerlin a replacement or exchange as he is clearly unhappy with the board (and yeah, I get it, even being familiar with their quality disclosure there is a fair chance I'd have a similar reaction).
@nonnegaard2 жыл бұрын
Bro have they swapped our boards xd. I have a silver and brass No.1/TKL that is supposed to be B-stock due to "blemishes on brass", but I genuinely do not see it. Mine is sandblasted on the outside, but honestly though.
@Kiyoboard2 жыл бұрын
I tried commenting few times before, but they never showed up for some reason, potentially because I shared links. I also have an issue with my KC No 1 Rev 2. There is a very noticeable gap between the weight and the top case on the sides. Doesn't change the functionality, but doesn't look "high-end" either. I emailed them twice and it's been couple of weeks since my last mail but haven't gotten any reply back. For full disclosure, my unit was aftermarket so they are not obligated to do anything(which I mentioned in my email), but the fact that I got no reply means that they either don't check the email or backlogged a lot. I am curious if they are going to help you with your situation which hopefully they do.
@Jano24802 жыл бұрын
I have question about the C3 daughterboard, does it also protect the boards from overclocking them to 1ms and 1000hz pull rate?
@MechMerlin2 жыл бұрын
I don't think there's a specific protection chip for that.
@dennishamilton80092 жыл бұрын
17:49, is that guy trolling? Who cares if you'll never see the brass weight it's still terrible QC
@Donbros2 жыл бұрын
Keycult cool. Took an l on extras XD Merlin! I remembered keycult didn't make polished brass on extras! They said they had issues with weight indeed. I think it is something with polishing maybe those are bits of polisher
@gvstleon2 жыл бұрын
I would be livid if I was the one who purchased this.
@zeminem352 жыл бұрын
@mechmerlin Is there a video of you building the board? I would like to see what were your final thoughts.
@MechMerlin2 жыл бұрын
I haven't built it yet tbh. I've lost a lot of interest in it.
@zeminem352 жыл бұрын
@@MechMerlin Would you care to sell this one? I just took an L on a B stock sale today, after watching your video a few days ago :D. I came back to it today, because your dissapointment is comforting me, but at the end of the day i really wanted one...
@jelmerkuperus40562 жыл бұрын
yikes... thanks for that. I'll think twice before getting a keycult
@MechMerlin2 жыл бұрын
I think the non polished ones will be a whole lot better
@espgodson2 жыл бұрын
did they replace the brass for you?
@TakedaKenshi2 жыл бұрын
So glad I held off on this... what a disgrace.
@_r_mck2 жыл бұрын
Kinda glad I took a L on this
@Donbros2 жыл бұрын
I think they didn't sell polished brass in extras as they all were like this :/
@forgiivn2 жыл бұрын
Dang unlucky...
@jeryjj39432 жыл бұрын
Yeah this was not acceptable...
@bodythetan2 жыл бұрын
Shame on KC
@goldiluckx2 жыл бұрын
Yeah mode finish on brass is way better than this Keycult
@nikopic2 жыл бұрын
Sus qc? just get safa.
@MechMerlin2 жыл бұрын
Safa doesn't look as nice to me
@DrewDevs Жыл бұрын
Nahhh Keycult fell off hard. Sorry about your negative experience dealing with KC weirdos
@MechMerlin Жыл бұрын
Yeah Im over it, I traded it for something much better
@dislikebutton17182 жыл бұрын
drop has Artifact Bloom series of keycaps that i prefer over GMK. they feel softer and the thoc is better. try them trust me. RIP Keycult, flip it for less than you paid for.