Great review, Charlie & John! It's good to see complete honesty in reviews of products so that we consumers are informed and prepared. Hate getting a non Aussie plug! Thanks!
@Monocure3DProTips3 жыл бұрын
You keep up those comments and we will keep making the videos!!
@vfxforge3 жыл бұрын
the videos you guys produce are always top notch, 10/10
@vfxforge3 жыл бұрын
nice tip with the talc powder too ;)
@Monocure3DProTips3 жыл бұрын
Thanks for the encouragement! We will keep making them with comments like that...
@dans_stuff3 жыл бұрын
Nice honest commentary on the new machine, Charlie. Helps to judge the pros and cons of these new units👍
@Monocure3DProTips3 жыл бұрын
Final review of all our XL printers coming out soon in one video
@obusventer47982 жыл бұрын
Thanks guys
@Monocure3DProTips Жыл бұрын
No worries!
@Rick.1233 жыл бұрын
Amazin review thanks but I think the right print volume are 20x12.5x22cm
@dmaikibujin3 жыл бұрын
Yeah. The website has the specs you've listed.
@Monocure3DProTips2 жыл бұрын
Ok thanks for letting us know.
@stevesloan67753 жыл бұрын
Top stuff... ! 🇦🇺🤜🏼🤛🏼🍀😎
@Monocure3DProTips3 жыл бұрын
Thanks Steve!!
@DrZoock3 жыл бұрын
the calibration part on the download section seem to be an old one without the "arrows"
Good review. I'll probably be ready to pull the trigger on a larger printer in a few months. Still doing a bunch of research, but for my price range it'll kinda be a choice between the Elegoo Saturn (easier to get an interview with Bigfoot), the Photon Mono X and the Mighty 4k. Since you guys have checked out both, may I ask what your preference between the Phrozen Sonic Mighty 4k and the Anycubic Photon Mono X is?
@Monocure3DProTips3 жыл бұрын
Thanks Jeff. They are both good printers, but I think the Mono X has a slight advantage as you can turn down the UV light intensity. Also we like that the Mono X has the auto-resume after a power outage.
@adre2389013 жыл бұрын
Would you say the epax e10 is better than the sonic mighty?
@paulabstruse9436 Жыл бұрын
Hey guys, I'm using a Phrozen Mega 8k and i'm using your 3d Rapid white. I use Lychee slicer. I'm printing large format pieces of cars and the such. What resin setting would you recommend?
@Monocure3DProTips Жыл бұрын
Start with 2.5 second normal layers and 25 second base layers if printing at 50micron (0.05mm)
@paulabstruse9436 Жыл бұрын
@@Monocure3DProTips thank you. I’ll give it a go. So that would be for fairly heavy and large prints right? 1/6th scale cars.
@3daddict2223 жыл бұрын
Thank you very much for this video we were waiting for it do you think you can make a video with the chrystal clear on mighty 4k and also the chrystal clear with the Sonic Mini 4K or maybe share the settings on social networks thank you for your answer
@Monocure3DProTips3 жыл бұрын
No problem. You can get the settings on our website by following the Tuff guidelines. The most important thing is the post process with Crystal Clear.
@Warbeaver3 жыл бұрын
Best thing, it's from Taiwan. Not China. 🇹🇼
@Monocure3DProTips3 жыл бұрын
Yes! Good point
@Kreated_by_khaos2 жыл бұрын
nice review , so i have a tub of bigvat 5k and a few bottles of rapid which is it best ? im guessing the rapid but the big vat a close second ?to use with this printer and do you supply the specs so i can add it to chitbox ? once again thanks :)
@Monocure3DProTips2 жыл бұрын
Thanks for your positive comments. The BiGvat Resin should be superior to the Rapid resin, but both a very good!
@Kreated_by_khaos2 жыл бұрын
@@Monocure3DProTips and your right the big vat is stunning now i have it tuned in omg stunning
@natsariat4303 жыл бұрын
Esta Hermosa
@Monocure3DProTips Жыл бұрын
👌
@brcjackson3 жыл бұрын
That power supply does not look to be approved for Australia?
@Monocure3DProTips2 жыл бұрын
It came from an Australian supplier?
@kaisfullerton13482 жыл бұрын
Would you say this is the best bang for buck?
@Monocure3DProTips2 жыл бұрын
Printer you mean?
@kaisfullerton13482 жыл бұрын
@@Monocure3DProTips yeah mate
@tomebritton3 жыл бұрын
Are you guys getting Mega when it comes out?
@Monocure3DProTips3 жыл бұрын
I hope so!
@ianchristian87453 жыл бұрын
Wow, nit pick much? Build plate is fine! Plastic bottom is fine. USB could be moved to the front and off to the right, That's all... And you put the fucking Vat screws in UPSIDE DOWN! A Handle on the Lid? Seriously?? The Layer Hight can print .05 normal. Did you do ANY research about this Printer at all??
@Monocure3DProTips3 жыл бұрын
Thanks Ian. We use these printers everyday and do weeks of testing before “nit picking”, our opinions can be listened to or ignored.