The bracelets from Larry at Uncle Seiko are made by a Seiko nut for the Seiko nuts. We finally have a Seiko fanboy making the products we want and need at the prices we can afford. www.uncleseiko.com
Пікірлер: 82
@larrybouligny43526 жыл бұрын
Great review! Thanks for sharing, Rob. Incidentally, one of my nephews (not really) told me that if you flip the bracelet over and put the underside on top, you can turn it into a brushed metal bracelet! I hadn't realized this when I had them made, but it is a kind of cool alternative if you want a less blingy look. Keep it up, Rob. Great videos! -- Uncle Seiko
@RandomRobReviews6 жыл бұрын
That makes sense, maybe will try that and show that option.
@jasonJones-ks5co6 жыл бұрын
Thanks for doing a video on Uncle Seiko I couldn’t happier with mine. He ships fast and he’s easy to communicate with.
@larrybouligny43526 жыл бұрын
Someone below mentioned that the rattling of the z199 makes it sound like a piece of junk. As I shared with him, the rattle is from the excess bracelet being tucked under the clasp. If you don't want it to rattle, take off another link or two and don't store the extra under the clasp. It has nothing to do with the materials used.
@stuartcole48453 жыл бұрын
Here’s some information for the misinformed here: 1. If a particular bracelet Uncle Seiko makes has a stamped clasp, it’s because the original version had a stamped clasp. It’s a specific design decision to replicate the original, not a cost cutting measure. 2. If a particular bracelet Uncle Seiko makes has hollow end links, it is to get the end link to actually fit. There is a reason why Seiko, in 2020 uses hollow end links on almost all of their sub $500 watches and it isn’t just cost. It’s because there is just enough variance in the tolerances of their case manufacturing that they could never get solid end links to reliably fit at the scale they produce watches. So Seiko, like Uncle Seiko, uses hollow end links which can remedy this issue and get a tight fit. A solid end link that doesn’t fit correctly cannot be bent and manipulated to fit. 3. To anyone mentioning the fact that Strapcode uses solid end links for these lower end Seiko straps, they recognise this issue to such a degree that they have multiple disclaimers about fitment issues. Their solution? They will send you really thin spring bars, which allow the solid end link to fit by creating a looser fit. This looser fit results in your endlinks moving and wiggling to quite a degree. Whilst we are on the topic of Strapcode, some if their bracelets are almost twice the cost of Uncle Seiko but with much worse finishing. Some of the edges are so sharp you can cut yourself on them. 4. Larry (Uncle Seiko) is a member of the community and hobbyist, designing and making from scratch bracelets which are intended to be “drop in” replacements for ageing, vintage Seiko originals. He could easily charge significantly more and still sell a ton of straps and bracelets but he wants to keep his products accessible to everyone, which in my book buys him a ton of goodwill in the watch community and I’ll support him at every chance I get. Strapcode are at best rebadged Aliexpress generic pieces cobbled together (yes, really).
@rigellyerly27032 жыл бұрын
Not to mention also that Stapcode super jubilee bracelet sucks because it's doesn't have female enlinks..
@mariog72132 жыл бұрын
@@stuartcole4845 well, four years later uncle seiko offers solid end links and a milled clasp 😁
@drwindsurf6 жыл бұрын
Cool bracelets. Thanks for sharing Rob :)
@lucacadianalbert6 жыл бұрын
I LOVE his bracelet - I own one of his oyster and it's super nice. Plus you get kick ass customer service. I'm tempted by the z199
@chrisauge68026 жыл бұрын
Thanks for the review...I've heard his rubber straps are great too
@Tim09096 жыл бұрын
Thanks for the review Rob, the skx mod also looks very clean
@22Phanatic6 жыл бұрын
Cool stuff from Uncle Seiko , I like his rubber straps too like the tropic Strap it’s perfect for my 051
@seikorebel79676 жыл бұрын
Larry should make straight end links for his BOR. Nice guy and solid products
@1968jpy5 жыл бұрын
Awesome video Rob 👍🏻
@nickg29546 жыл бұрын
Nice review!!love tapered bracelets
@tunokies6 жыл бұрын
Yes. Definitely grab some more for review. I've got all 3 sizes of his tropic. One on my SLA and one on my wrist on a 7002.
@noahwofford24336 жыл бұрын
That beads of rice bracelet's clasp looks extremely similar to the Miltat ones. Especially the foldover and push-buttons. Loving the vids Rob.
@RandomRobReviews6 жыл бұрын
I am sure it’s from the same parts bin. Many use them, very good clasp and keeps them affordable if everyone uses them.
@JesseMrozowski6 жыл бұрын
What's that second watch? It looks like an SKX but the face is a very bright blue which I like.
@benec58166 жыл бұрын
Oh don't they look great wonder which would look best on my SNE391 THANKS FOR ANOTHER GREAT VIDEO STAY SAFE
@kierenmoore32366 жыл бұрын
Thanks for the review! Does he do a solid end-links bracelet for the Alpinist (SARB017)?
@ramonalbertotamayoisla25926 жыл бұрын
Thank you for your vids.
@DenisHauser6 жыл бұрын
3:20 The second volume is a dreamlike beauty! :-)
@Miamis4me3056 жыл бұрын
Yup. Push pins three seconds screws three minutes. Good looking bracelets.
@RandomRobReviews6 жыл бұрын
Miamis4me Push pin for the win. Just no collars please. Haha
@jayrichards13156 жыл бұрын
Hi Rob, what model skx is that with the blue sunburst dial, I love it. Or have u modded it? If so could you post the link to the dial please
@treblarefils6 жыл бұрын
The rubber straps are great also !!!
@kinshilp6 жыл бұрын
Hi Rob, have u tried swapping the clasp/buckle with an original seiko clasp/buckle? pls let me know. Thanks!
@waktosha73786 жыл бұрын
I have the beads of rice bracelet for my 009. It is super comfortable and looks amazing, until you look close. The outside of the links are not machined evenly and a couple of them jut our on the edge. It could've been an awesome bracelet if it weren't for the poor machining!
@JP-cv8wz4 жыл бұрын
They're both look great with stainless steel watch
@natjes60175 жыл бұрын
Great Review! I´m really interested in a Z199 for my 7C43 as I normally use a nato, and I don´t like the strap it came with, DAL1BP. So this kinda pushed me in the correct direction :)
@vosedon4 жыл бұрын
You like the super jubilee or Z199 better? Great video
@joexg506 жыл бұрын
Thnx for sharing Rob, I tend to agree with you on all counts.. swell video
@JohnnyParanoid6 жыл бұрын
Think I'm going to have to get a Super Oyster from good 'ol Unkle Seiko.
@SmurfPerfect6 жыл бұрын
Gorgeous stuff. Now, please make a jubilee bracelet for the SARB033 - then I can die happy.
@Tonyip836 жыл бұрын
Yes!!!! Z199!
@williamthomas57806 жыл бұрын
I hope he sends you a Razor to review. Good videos by the way.
@saddiqbeck43064 жыл бұрын
Can anyone share how the size (length) of the clasp of the BOR and Z199 bracelets compare to the one on the original bracelet. Thanks!
@herug3281 Жыл бұрын
Do you have to resize it for smaller wrist sizes
@jasonwb68846 жыл бұрын
Hate hollow end links unless there rolex style. If solid end links are machined right, they always fit perfectly with no movement.
@nelxonmiranda5 жыл бұрын
I bought two of those from the guy The skx007 bracelet was fine. The srp777 clasp didn’t close very well. Too bad end links are hollow. The srp endlinks had corners sticking up above the pad. Too bad.
@stuartcole48453 жыл бұрын
Here’s some information for the misinformed here: 1. If a particular bracelet Uncle Seiko makes has a stamped clasp, it’s because the original version had a stamped clasp. It’s a specific design decision to replicate the original, not a cost cutting measure. 2. If a particular bracelet Uncle Seiko makes has hollow end links, it is to get the end link to actually fit. There is a reason why Seiko, in 2020 uses hollow end links on almost all of their sub $500 watches and it isn’t just cost. It’s because there is just enough variance in the tolerances of their case manufacturing that they could never get solid end links to reliably fit at the scale they produce watches. So Seiko, like Uncle Seiko, uses hollow end links which can remedy this issue and get a tight fit. A solid end link that doesn’t fit correctly cannot be bent and manipulated to fit. 3. To anyone mentioning the fact that Strapcode uses solid end links for these lower end Seiko straps, they recognise this issue to such a degree that they have multiple disclaimers about fitment issues. Their solution? They will send you really thin spring bars, which allow the solid end link to fit by creating a looser fit. This looser fit results in your endlinks moving and wiggling to quite a degree. Whilst we are on the topic of Strapcode, some if their bracelets are almost twice the cost of Uncle Seiko but with much worse finishing. Some of the edges are so sharp you can cut yourself on them. 4. Larry (Uncle Seiko) is a member of the community and hobbyist, designing and making from scratch bracelets which are intended to be “drop in” replacements for ageing, vintage Seiko originals. He could easily charge significantly more and still sell a ton of straps and bracelets but he wants to keep his products accessible to everyone, which in my book buys him a ton of goodwill in the watch community and I’ll support him at every chance I get. Strapcode are at best rebadged Aliexpress generic pieces cobbled together (yes, really)
@SHENTONRG6 жыл бұрын
Hmm.. The price is better than Starpcode but I would say the strapcode seem a bit more solid. I have a Hexad from strapcode and its great but it was expensive tbh
@MrBacchus1810 ай бұрын
I bought a z199 from uncle seiko and it is fantastic. I had a BOR uncle seiko bracelet that I didn't like though.
@gomtv53836 жыл бұрын
I'm getting a z199, that taper looks so good! Does anyone know if there is a third party oyster style bracelet for the SKX that tapers to 16mm?
@mariog72132 жыл бұрын
I know it’s three years later but strapcode does
@gomtv53832 жыл бұрын
@@mariog7213 well thank you :D
@timemachineeddie11466 жыл бұрын
Great review. Great watch Bands. What I would like to see from Strapcode or Uncle Seiko or Miltat is a better quality Seiko Monster Bracelet with the links at least 5-6 mm thick.. If You check out Aragon watches their bracelets make the Angus Jubilee look anemic. They are amazing.Just a thought.
@benjamin88993 жыл бұрын
I'm very tempted to pick up a z199, plus 1035 for my SMPc, but I had one of their Oysters a while back and I really wasn't that impressed.
@shipmate35776 жыл бұрын
The rice beads bracelet looks amazing. Wish they were NOT hallowed end links; that's one of the whole reasons to change bracelets for me.
@RandomRobReviews6 жыл бұрын
The stock Seiko jubilee is one of my all time favorites and it’s all kinds of hollow.
@vegandinner17316 жыл бұрын
Have a look at Strap Code.
@SlipKid19753 жыл бұрын
Vegan Dinner Strapcode doesn’t carry the beads of rice bracelet. I have the bracelet and it’s a really comfortable bracelet. I’m wearing mine on a Samurai.
@TennesseeMike5 жыл бұрын
If I wanted to have some extra push pins on hand for Beads of Rice what do I need to order? I'm in process of putting order together on Esslinger to have some spare parts. Thanks in advance for help.
@RandomRobReviews5 жыл бұрын
Email Larry at Uncle Seiko, I am sure he can help. www.uncleseiko.com/contact.html
@jonathanvasquez96046 жыл бұрын
Hi Sir! May I know where u bought ur blue SKX & those bracelets? Ty
@RandomRobReviews6 жыл бұрын
Bracelets are from Uncle Seiko on the web. The bright blue skx is modded and not something you can buy.
@caomhan844 жыл бұрын
Ordinarily I'm not a fan of polished center links. They scratch like hell. But that Beads of Rice bracelet....ooooo boy. That's a sexy bracelet. I'm sitting here with an Uncle Seiko waffle strap v2 on my Turtle and I'm very impressed. It's only slightly less-comfortable than the Seiko OEM silicone, but it wears much better on my small wrist. Looks cool, too. But if Larry perchance reads this...go back to 2 keepers on the 22mm! It'd be perfect if that was the case.
@ramzey1896 жыл бұрын
Uncle Seiko just came out with the all new RAZOR-WIRE for the Turtle. It looks insane. Please review!
@RandomRobReviews6 жыл бұрын
I noticed that. They look very cool to me. I need to buy a normal turtle though to review it. Only have the black one and the gold one.
@kh378595 күн бұрын
Show the other Bracelets please
@situation_zero6 жыл бұрын
Another thought just occurred to me: does Uncle Seiko have any plans to make bracelets for the new mini turtles?
@RandomRobReviews6 жыл бұрын
See what end links fit. They are 20mm lugs, most of what he has is 22mm.
@jamesshives56796 жыл бұрын
I wish he would make these for the skx 013.... I especially want a solid endlink president for my 013, but I know thats alot to ask since it probably wouldnt be as popular a seller. Also, I'm on the same boat in the push pin vs screw thing
@larrybouligny43526 жыл бұрын
Me too! Less chance of problems, i.e. the screw being stripped or falling out.
@situation_zero6 жыл бұрын
I'm very interested in the Uncle Seiko President for an SKX mod I'm building. Cheers.
@jasonJones-ks5co6 жыл бұрын
GEARY I just got the president for my 007 it’s very nice fit finish and quality is top notch
@paolosoddu96426 жыл бұрын
Is there any uncle Seiko bracelet for the skx013?
@toolongforyoutoread65 жыл бұрын
Yes, beads of rice.
@geneangelos84063 жыл бұрын
Could you give me the link on where to purchase anyone of these.
@RandomRobReviews3 жыл бұрын
Like the link provided in the description?
@kareldewit125 жыл бұрын
Can I use the Z199 for the seiko skx013?
@RandomRobReviews5 жыл бұрын
Don’t think so
@markyhundreds5 жыл бұрын
z199 is a great bracelet, and i get the reasoning behind going with hallow end links and stamped clasp. But $69 for hallow and stamped? hmm me thinks not.
@NasserAlhameli2 жыл бұрын
I bought one... 1171 US president, waist of money... I cannot imagine how it feels comparing to my Omega seamaster bracelet, very cheap! Waist of money if you bought it for your luxury watch
@highnrising6 жыл бұрын
I only watched the first 2 minute. The bracelet rattles around and makes such tinny noise when you handle it that it sounds like a real piece of junk. Maybe the original is like that, too. I don't know.
@larrybouligny43526 жыл бұрын
Actually, since Rob chose to put a lot of the bracelet under the clasp rather than remove the correct amount of links, it rattles. I was going to mention that to him but forgot. So, the noise you hear is from excess bracelet, not based on the materials used.
@whysoserious98496 жыл бұрын
junk
@JP-cv8wz4 жыл бұрын
They're both look great with stainless steel watch
@sososofteshu37416 жыл бұрын
junk
@JP-cv8wz4 жыл бұрын
They're both look great with stainless steel watch