I’m about to throw mine in the trash... their customer service is so poor , KZfaq is a much better source of help! Thank you!

Just add an easier unclog tip to this great video ,,, at around the 7:10 min mark when you see mike pinching that 90 degree bend in the rubber tube you’ll notice 2 smaller Phillips head screws just behind there. Remove those and then you can remove that whole needle assembly ( very easy too ) and use vinegar or CLR mixed with hot water to clean that out completely. I tested mine at that point as well by holding the rubber tube that comes from inside the reservoir and ran a few cups of my cleaning fluid ( CLR ) and confirmed it flowing freely. Re-Assemble and your machine is like new again. Thanks Mike for the video. Very Helpful.

This is a game changer for me. I'm a professional field technician and I come across this issue constantly. Really nice to know about that internal clog. (We don't get much in the way of training, so it's more of a figure it out on your own thing). I think you just solved at least 80% of my Keurig issues! Thanks for the video!

Several years ago I found your video. I followed your steps. It unclogged my Keurig. My Keurig clogged again. I'm glad I saved this video. Thanks for the video

This really helped me this morning. I followed all your instructions and now I drinking my coffee. Thanks

OMG! I just fixed my Keurig by watching this video! I was ready to trash it and this actually worked and I did it myself! So proud...Thank you so very much!

Ohhhhhhh thank you so much, Darling. Now I can fix my Sister's Keurig maker she was going to toss it out the door . Smiling . You saved the day 💖💖💖💖💖

Thank you. I had slightly different problem. I was out of town for about two months, and when I was back, my machine didn't work pretty much the same way. However, in my case it wasn't coffee but stuck cylinder inside of that wider pipe you can see on your video. It didn't want to move forward, therefore it did not allow the water to flow. The solution was to run the machine, and as it wanted to push the water forward, I gently squeezed that wider part with a sort of cylinder inside. Then the cylinder once again started moving forward as the water flowed (and it backs up when the water doesn't flow). My machine is now working beautifully.

I just did this to the Keurig at my job!! It worked perfectly :-) I told my manager I am so adding handy-woman to my resume. Thank you so much for your video!!

Thank you! Sure did appreciate your no nonsense, yet encouraging approach to the problem. It saved me the cost of a new machine. A few minutes vested with you, and a half hour with the machine and it works like brand new. Well worth the effort!

My Keurig had quit and I assumed that the pump was out and I was ready to throw it away. Your video was a great source of information and this 70+ grandmother fixed it herself. It’s now working as good as new thank you so much for your very helpful demo.

Thank you so much for your helpful video! I've only had my machine for about a year & half and all the sudden I had no water flow. Your video helped me to take it apart, clean it out, and put it all back together again with success! You rock! :)

Thank you for posting this video on how to fix the keurig. I almost tossed my keurig in the trash. Your video saved its life thanks for saving me money.

I opened the head, unscrewed the silicone hose holder, slid up the hose cuff then popped out the tip of the hose to inspect it. There was a back up of brewing material. Took a straw brush and ran it through the rubber tube. Ta-da!!!! Running like a charm.

I just moved and I have been without my coffee for a week. I unpacked it, went to use it and it was clogged. I tried a few things but with no luck - the baster part saved my life and I can now enjoy my coffee as we unpack. LIFE SAVER. Thank you!

Dude many thanks!! My friend was about to the Keurig to the curb and I said let me look at it!!! Now my girl has a Keurig!!!

This is the only video that fixed my Keurig! Thanks for showing me how to take it apart.

Thank you I just bought this machine at Salvation Army for $5 and water wasn’t coming out! Saw your video and fixed it and also was able to give it a complete cleaning! Now I got a perfect machine! Yeah!!!

I came across your video I just purchased a new Keurig during the Black Friday sale I had a old Keurig elite I did what you suggest in your video and unclog my old Keurig machine and I had nothing to lose I tried it it works perfect I wish I would have came across your video before I purchase a new Keurig thank you so so much please keep that video up to help others like myself🙏

Thanks! You just saved me $150! Thought I was going to have to buy a new one, but thanks to you, I now have coffee!!

Thanks. It took longer to watch your video than to repair my Keurig following your instructions. That’s a compliment. Very thorough and effective!

Thank you; thank you; thank you! I cannot tell you how badly I needed a cup of coffee this instant. Every other solution I saw online failed me. This was the one that worked.

Used your suggestions for my Keurig K-Cafe model. Worked like a charm. Thank you so much. Your video gave me the knowledge (and confidence) to look under the hood. My 12oz button was only giving me 7 ounces of coffee. Now I’m back to 12 ounces once more. Thanks again. 🍻

Oh my...Thank You,Thank You, Thank You ! The last time this happened I put it in the trash. I now have a smaller one cup Keurig. Thank you so much for saving the day. I am a coffee lover and I can't go without my Keurig. I just fixed mine in about 10 mins. Holding it upside down really did the trick. After that it started running perfect. Thanks again for this video. I think I will just leave my cover off so I can always see it when it starts to clog. LoL. Thanks !!!!

Nothing like being able to repair your coffee maker to bring a feeling of some control over your life in these crazy times. KZfaq heroes like you are Pandemic depression busters! (That is one of your super powers-I am sure you have more.) Thank you. Seriously-this is awesome!!

Thank you so much! Your video helped me fix my KEURIG seamlessly. I was afraid that I was going to have to get rid of it and purchase a new one. AWESOME JOB!!!

I took my top cover off like you did, and as it turns out, the valve was stuck. All I had to do was flick it and bang on it, and she runs like a champ!

Thank you so much for posting this ! We have the same model and I was beginning to think I was going to have to throw it away. With your help I've got it running like new again !

Thank you! I had the same issue this morning with my keurig and this process worked like a champ. The screws are a bit of a pain to get back in because of the awkward underneath angle and tiny space but it’s worth the effort!

Thanks for your tip, I fixed our Keurig, now for a cup of coffee!

It worked!!! God bless you! I was about to order a new machine at the office, but this fixed the problem. I only used the paperclip and didn't have to take apart the machine.

You are my fav person right now.....3days no coffee,i was going bonkers. Your troubleshooting worked! Thanks

I got mine from another department at work. They bought a new one and they thought this one was dead. I just cleaned it watching your video. I will bring it back to the office on Monday, the counselor and I will be so happy to have a “new” Keurig LOL , thanks for sharing your video.

This is the 5th "fix Keurig" video I've watched and it's the only one that fixed mine. I had a feeling that something was clogged. When I squeezed the elbow in the top carriage a bunch of coffee grounds came out, just like yours. I've now run 5 cups of water without issue. Thanks for the fix. FWIW, the Keurig company replaces them if under warranty and just tells you to throw the old one away. They don't even want it back for refurbishment. That's our disposable economy for you.

Just cleaned my keurig and had this issue...I followed your instructions and it worked like a charm! I'll be toasting you with a warm cup of joe tomorrow morning-thank you!!

The paper clip trick worked. I ran the paper clip up into the three holes round the needle and it cleared it and now my wife is a happy camper!

You are so the bomb! I was so stressed out thinking I was going to have to use this new one that I got on sale because I thought mine was dead! Now I can just return the new one! All that extra maintenance and special pods..... I had a friggin headache. (Thanks for that Keurig you should have stuck with simplicity!) Just knew there was someone on KZfaq that could provide some helpful hints on how to fix my old keurig! Thought I had tried everything til I saw this. So thank you for saving my Keurig B60!

So glad I found this! Vinegar was doing nothing for me and the clog was so sudden that I knew this had to be the issue. Unfortunately even my husband couldn't get those screws loose. Pretty sure they don't want us fixing them, but buying a new one instead. I tried shaking the machine while it tried to brew and I'd get out about a tablespoon of water and sure enough... several coffee grounds. I decided to get more aggressive and hit the top of the machine where the clip would be pretty hard with the palm of my hand and started to get a full cup again. I had several coffee grounds coming out for a fee cups, then it was good as new! My machine is 9 years old, so I'm pretty impressed really that I didn't have to pitch it and that it took such hard hits without damaging it. I figured I had nothing to lose since I couldn't get the screws out and vinegar wasn't working. I think I had filled the refillable cups too full and that's why it happened. I would bet many using those are having this issue. I use the paper filters and the last ones I bought are more narrow, so I filled them pretty full. I learned a couple things today! Thanks so much for this very helpful video!

Thanks, this fixed mine. I was going to tear into the interior, and this saved me a lot of time and grief.

You saved my machine from the garbage.. and me about $130 for a brand new kurig. Thanks

Awesome thanks for the video! You help me fix my Keurig didn't realize it was such a simple fix I thought maybe the pump went since mine wasn't even dripping any water. But this fix worked! Thanks again

This is EPIC! I was ready to toss this in the trash until I found your video! Thank you! Of course I showed it to my husband and he followed along and YES it worked! Saved us money and we have delicious coffee again!

Thank you! Your video enabled me to clean my Keurig without problem. I had no idea how to even start before watching your demo. Thanks again!

Our coffee maker hasn't worked for a couple years now and I was to the point get it working or throw it out. Then I found your video, followed the directions and presto water is now being pumped through the system and I am currently descaling it again. Thank you for this video!

Kuerig was making the fill noise without actually filling and was not drawing any water. This video corrected the issue. Thanks Guy!

I was ready to throw mines away and go get an old fashion coffee pot, before I came across your video!! Thanks for sharing!!

Thank you so much for your grear explanations. You saved my coffee maker from joining the other ones gone o the trash.

This video was the best. My Kuerig was not filling up the flow to the cup after cleaning. I removed the top part as shown and that solved my problem...THANK YOU...and keep them coming.

Mike, you are a STUD. I followed your instructions and my Keurig is flowing with coffee again! You saved the day!

This video is straight to the point and works. Great job thank you!

Omg it actually worked! Thought I had to buy a new one. Thank you for the great tip!

Thank you so much! I was about to throw my keurig away and then saw your video. This is the only video on internet that solves clogging problem.

After storing my Keurig for 6 months, I could hear it working but it wasn't pouring coffee into my cup. Instead it was draining the hot water back into the reservoir thru the vent. Watching your video did the trick, even though all the areas you mentioned - the needle and rubber tube weren't obviously clogged, I still did the paper clip task and also squeezed ALL the rubber hoses, including the inline filter?/valve? unit (not sure what it is) next to the elbow you were focusing on. It worked like a champ when I reassembled it. My unit is an older model and I had to remove the lever/handle to get the top off. This required a torx head screwdriver. I also needed to squeeze the sides of the top and pull back slightly to remove it after removing the 2 screws underneath as you showed. Thanks for the video.

This worked! My husband fixes medical equipment for a living and we thought it would be more trouble than it was worth to take it apart, then I was the one who fixed it while he was in the shower thanks to you! :-)

Thank you so much for your upload, I still have my older brewer that leaked from the bottom but also bought a new one. Gonna dissect my 7 year old brewer that was never descaled because I only used filtered water. I'll update when I'm finished. Thank you, again!

Thanks Mike. I was going to do the same and throw it in the garbage as well! You can also remove all the plastic tubing as well which helps. Be careful not to damage the filter half way on it. Much appreciated!

This saved my Keurig!!! Thank you so much for sharing your information!!

This works. Then, to keep it from clogging in the future, run a few cups of clean water through it daily. Spot on!

Your video enabled me to fix a trashed Keurig I picked up. I went one step further than yourself--I actually unclipped the tubing (maybe a little tricky for some? Care required.) With tubing loose, I gently pushed through a paper clip through the needle from above (lots of impacted grounds came out) until perfectly clean, swapped the tube out a bit with a QTip, reclipped the tubing and repeatedly ran the machine without a Kcup. That flushed out the remaining grounds. Works like new now. THANK YOU!

This video really helped me today; thank you! Our brewer is the exact same model as yours. I didn't have the coffee grounds up in the tube; our issue was there was almost no water flowing. The use of the paper clip in the top needle is what fixed our issue. I also ran about 12 oz. of vinegar mixed with an equal amount of water through the brewer to clean it out. In your video, of particular help to me was your good descriptions of how to remove the various parts.

Thank you... I removed the lid and burped my Keurig by squeezing the hose (toward the back though)... it worked... yay... This was the only thing that worked after trying other things..

I had descaled according to manufacturer's instructions and even called Keurig support. They just had me do same steps in manual again and said it would have to be replaced and gave me a 25% discount if I wanted to order it online. I followed your instructions and it was running like new in less than 30 min. Thank you for saving me the cost of replacing a perfectly good machine.

Was about to chuck mine out. Thank god I found your video. All fixed now. Many thanks 💜

Worked! No grind build-up in that portion of hose mentioned but still followed what you demonstrated and BOOM 💥 a couple of grinds came out and presto! Working great!!!! 👍🏻

Great video I did mine a few years back before KZfaq was the stop for all types of repairs. If I may add a way to prevent the grounds from entering the discharge is to push the k-cup down by hand to penetrate the bottom first. The container is somewhat air tight and the foil pierced before the plastic so when you use the handle to the bottom pushes up forcing the captive air to escape through the easily pierced foil side to oust some grinds backward. No problems with mine for over two years! Just a little prevention. Thanks for educating.

Wow!!! Thank u so much! This worked....your video is still changing lives all these years later!🎉❤ Great job! I had to work at it for quite a while, and then finally success. ❤❤❤

My Keurig stopped pumping and I am so glad I found this video. Thanks.

Thank you for this video, I was at my wits ends I saw your video and my Keurig is working again, having my first cup of coffee for the morning, needless to say it was a long morning🤗

Thank you for this information! I was able to save my Keurig. Thanks again.

Thank you for this video. I threw my first Keurig away because it quit working. I have fixed the second one twice after receiving help from You Tube videos.

Hi Mike, Thanks a ton for your helpful video. Followed all your instructions and my coffee maker is once again,...back to normal. Cheers.

Thank you! After watching several videos with no luck, I got it to work after watching yours.

Thank you! Totally saved my Keurig! It wasn’t the exact same problem, as I noticed I didn’t have coffee grounds backed up, but after taking the top off sand squeezing all the tubes while running, water suddenly started flowing! I’m guessing either an air bubble or something with one of the things inside the tubes wasn’t moving correctly. Thanks again!!

Mike, thank you for your video. I myself have been using distilled water in my keurig 2.0 for years but recently I have noticed that I’m not getting the right amount of water in my cup. After several videos I came across your video and I have to say that your video was very helpful. I guess my coffee machine is no different than any other machine I purchased even the car. Everything needs servicing and maintenance. Thank you once again for the reminder, Thumbs up for your video 🫵👍👍😎

You sir, just saved me $100 today, haha! You’re the best. Thanks a bunch!

Thank you for your help, it was exactly as you showed in video. BTW the thing with that tiny screw is screwing it back on especially if you have big fingers. The squeezing of the tube did the trick, it cleared it out really good. Make sure you run it with water about 3 times till is clean. Thanks again.

This worked!! Used paper clip and compressed air on my iCoffee DaVinci. I was not able to take any casing off, but those small cleaning tips worked. Thank you!!

Thank You Mike, Spot on. It was an easy fix and I'm enjoying the best cup of coffee ever.

Thank you so very much. My Keurig is working again. Couldn't have done it without you!!

I have the same model, wasn’t working (no water flow) did the same steps and wala all fixed. Saving this video! Thank you!!

Thank you sooo much for this upload!!! I couldn't figure out how to remove the top and this solved all my problems!!! Back in the business of drinking coffee!!

Thanks so much for posting this! I have a K70 model which looks like the one in your video. It stopped working yesterday and I was going to trash it like the two other Keurig machines I bought within the last seven years. I started looking online and didn't like the new 2.0 models that seem to be not as good, but have more bells and whistles. I followed your instructions and my K70 is back up and running perfectly! I wish I had known this years ago. It might have saved me from trashing my other machines, lol. Thanks again!

Mike thanks this was very helpful. I'm glad that I did not have to take the bottom section off as another person had recommended. My name is Dorothy and I'm using my granddaughter's account.

This video was very helpful! Your troubleshooting went above and beyond, thank you!

Woke up this morning and couldn't make my coffee! Too early to be freaking out! I found your video right away and now my Keurig is working like new! Thank you so much! You saved my whole family from a cofeeless mom!

I just saved $100.00 by watching this video. Prior to the complete shut down of my Keurig it was not brewing the appropriate cup size. Thank you for showing the steps for taking this thing apart.

Good video, saved a lot of people, a lot of money. What I have found, to prevent future clogging, run one cycle, without a K-Cup inserted. This will flush out the upper needle. Cuz when you open your machine to remove and discard the K cup, there are leftover coffee grounds in the openings of the needle. They dry out, and block it up. Just put a clean empty white cup under the machine and run a cycle through without K-Cup inside. If you see coffee grounds in there you've obviously flushed them out.

Thanks for taking the time to explain the process. This video is super helpful!

Did the paper clip trick, and punched a hole in the elbow tube. Oops! So taking the top off and watching the water flow, combined with pinching the water line to increase suction, and clearing the pathways with the paper clip did work! The wife is enjoying a cup of cocoa. Thanks for the help!!

OMFG... BEST VIDEO EVER!!! FIXED MY KURIG IN LESS THEN 5 MIN🙏💪💯🙌😎 YOU'RE THE REAL MVP!!!!

Wow!!! Thank you so much! I really was over my Keurig and was going back to the old style coffee maker. Thank you again 🌺

Thank you Mike I had try to do the needles still low flow so took too off line was clean but could see needle better and took to them again and felt something give and ran water three it slow then kerpop full flow works better then new it's a 2.0 Keurig was going to replace tomorrow you saved this old retired man mucho $$$$$$...God bless keep up the good videos.

Good morning, I've watched a couple of videos this morning and your video was the only one that did the job. Thanks for sharing and taking the time out to make this video. You saved me some coins because I was getting ready to purchase another Keurig.

Thank you. This is exactly what was wrong. Mine has a descale light that never lit up. I was looking for a new Keurig online when I found the vid on KZfaq. Saved me time and money.

Thanks, your video helped me fix my Keurig B60. Now I can continue to enjoy one of my favorite vices...too much coffee!

Thank you, I know this is an old video but, exactly what was wrong with mine. Now it’s fixed. ❤

Thanks to your video I was able to save our keurig!! Took about 15 minutes to do and was a life saver. Thank you so much!!

Mike. Good starter video. If you remove the two tiny screws on the sides of the tubing then pull up on the tubing above the needle you are able to access the tubing elbow to allow the grounds to fall out. Then you can stop milking the tubing like a cats teet. You were not creating a suction rather just breaking it up.

This was a great video. I've had my old Keurig sitting in the box in the basement for the last year and a half after buying a new one and i just followed you video and it is working as good as new now. Wish i had seen the video sooner!👍

Best freaking video ever!!!! Even after 7 years 👍