UNDER $35! NEW BUCK FLIPPER! OVERVIEW/DISASSEMBLY
Рет қаралды 97,684
2 жыл бұрынUNDER $35! NEW BUCK FLIPPER! OVERVIEW/DISASSEMBLY | BUCK HILINE 263 |
* Look below for 10% Off discount codes and affiliate links.
* BUCK HILINE 10% off code Beez10 - whitemountainknives.com/buck-...
* BUCK HILINE on AMAZON - amzn.to/3Itk344
* RUIKE P801 ON AMAZON - amzn.to/3zbPIDb
* QSP PENGUIN ON AMAZON - 16 VARIANTS! - amzn.to/3Hq6kKo
* Smokey Mountain Knife Works - www.gopjn.com/t/2-395066-2651...
** Use code BEEZBLADES for 10% off on all Kizer Knives on Amazon, sold by Mojave Outdoor (Just check that Mojave is the seller and you're good-to-go!)
** Kizer knives on amazon - amzn.to/3slo5pE
Become a Beez Blades Member to get access to perks and chat emoji's!
/ @beezblades
* Join me on Instagram - / beezblades
* Email - beezblades@gmail.com
* White Mountain Knives - Use code Beez10 for 10% off at checkout on knives and gear! - whitemountainknives.com/
* KPL (Knife Pivot Lube) and maintenance affiliate - knifepivotlube.com/?ref=3c9gk...
* 10% off - Coupon Code is: beezblades
* Mojave Outdoors (Kizer Knives) 3 affiliate links
* 10% off Promo Code - BEEZBLADES at these 3 links
1. Mojave Outdoor Gear: www.mojaveoutdoorgear.com/
2. Mojave Outdoor on Amazon: www.amazon.com/kizer
3. Mojave Outdoor on eBay: www.ebay.com/str/mojaveoutdoor
* LANCELOT LEATHER - Awesome leather goods! - Use Code Beez10 for 10% off at checkout - www.lancelotleather.com/
* Patreon - Support the channel and join us for stickers and behind the scene video's and giveaways. Starting at only $3.00 - / beezblades
* Mailing address: Beez Blades
P.O. Box 341062
Dayton, OH. 45434
*Knife Maintenance Recommended *
- Loctite Threadlocker - amzn.to/3x10Rps
- Knife cutting mat with grid - amzn.to/3yQNwQp
- KPL Knife Pivot Lube - amzn.to/3qQbrwn
- KPL Knife Pivot Lube Combo pack - amzn.to/2Uw03K0
- KPL Bundle Kit - amzn.to/3qZ2Rvd
- Knife Maintenance Mat (3 sizes) - amzn.to/3xnPZRV
- Knafs mouse Pad - amzn.to/3hFK4B2
- Wiha ¼” Bit Stubby (black and red) - amzn.to/3dRuS2o
- Wiha Torx Bit Set I Use - amzn.to/3jOvXMb
- CRKT Bit Driver (The shiny one hahaha) - amzn.to/3qcldsu
*Knife Sharpening Recommended *
- Work Sharp Precision Adjust Knife Sharpener - amzn.to/3zoYKw1
- Sharpening Stone Holder - amzn.to/3ytig9C
- Dia-Sharp Benchstone Course (325) - amzn.to/3ywuUEV
- Dia-Sharp Benchstone Fine (600) - amzn.to/3ALroZp
- Dia-Sharp Benchstone Xtra Fine (1200) - amzn.to/3wtLe88
- Favorite Spyderco Benchstone Med. (600) Ceramic - amzn.to/3jQyPIw
- Spyderco Benchstone Fine (1800) Ceramic - amzn.to/2ViGhSz
- Various Strops (*I don’t own these) - amzn.to/3wn0C6a
*Knife Storage Recommended*
- Spyderco Knife Roll Large - amzn.to/36gFKTk
*Knives*
** KIZER KNIVES (Code BEEZBLADES for 10% off) - amzn.to/3EIYXMm
**Several Delica Styles on Amazon - amzn.to/3yjlhZH
** CJRB Maileah on Amazon (different options) - amzn.to/3eswEr9
* Kershaw Highball XL - amzn.to/3r0CKnx
* Spyderco Knives * - amzn.to/2UnQgFH
* Kershaw Knives * - amzn.to/3AFNkFg
* WE Knives * - amzn.to/2TJ4hOi
* Cold Steel Knives * - amzn.to/3AEH2W2
* CRKT Knives * - amzn.to/2ViVRxx
* Artisan Cutlery/CJRB Knives - amzn.to/3AAh9qw
* Boker Knives - amzn.to/3hmzMqz
** Civivi Knives **
amzn.to/3Hm2Us3
** Lighting used in video - amzn.to/37OLgxc
*As an Amazon affiliate, I profit from qualifying purchases
Knives used for comparisons in this video were the Spyderco Paramilitary 2, Spyderco Delica 4, Ontario Rat 1, Kizer Sheepdog, and QSP Penguin. Other knives in this video were the Kizer October, Ruike P801, and Kershaw Highball XL.
****DISCLAIMER** This channel's content is meant for educational purposes only, and encourages the proper/safe use, handling, and understanding of tools.
#buckknives #edc #beezblades
@OtherThanIntendedPurpose 2 жыл бұрын
very cool knife. I have a long history with Buck knives.. and they always served me well. I really like flippers, so this is going to be on my list. thanks for the good review. I still have my 110 from highschool, I bought it in 1983. ( I'm old)
@jimcarlson6157 Жыл бұрын
at my age, I can call you a young buck!
@dwaynek.1293 2 жыл бұрын
Just got the hiline a day or two ago. I really like it. It's one of my favorites now, and the grind is straight on it😲 Wow!!! Thanks Beez for convincing me to get it.
@waffel7664 6 ай бұрын
have had one for a couple months now, I really like it. Very smooth, still as sharp as the day I got it and it stayed tight and never got loose, unlike the multiple s&w knives I've had
@JustIn-op6oy 2 жыл бұрын
I could definitely see a Bos HT D2, made in the USA version of this knife selling like crazy. Even if the price went up a bit into the $45-50 range, I think the EDC community wants to support Buck. Their other flippers are pretty solid.
@TopDog8762 2 жыл бұрын
I would not mind paying more for the exact same knife but make with a American made blade Bos heat treated. But I would prefer Bos heat treated S35VN.
@JustIn-op6oy 2 жыл бұрын
@@TopDog8762 oh absolutely I'd want an s35vn version. I was just thinking what they could do around the $50 price point that would be compelling. If they went the s35vn I could see them slapping a $90 msrp on it.
@rorycalhoun8011 2 жыл бұрын
Bad arse… I had it on my wish list; now after watchin’ your vidja, it has moved up on my need to purchase! Tks!
@BeezBlades 2 жыл бұрын
You're welcome Rory! Have a good day brother!
@rickkerans8485 2 жыл бұрын
Happy New Year. Will be glad to see 2021 in the rear view mirror. Eventually we all find that one knife that is a bit difficult to disassemble. Nice looking knife if you like cleaver style blades. They not my jam but to each their own. Good overview and disassembly video. Would be interested to hear what you think after carrying it around and using it awhile.
@BeezBlades 2 жыл бұрын
Happy New Year to you too Rick! It's different, so I like it hahaha. I'll get to a review on all of them eventually lol. Thanks bro.
@vanhalendust Жыл бұрын
Great video! Thanks for the disassembly.
@dwainsw4076 2 жыл бұрын
Hopefully Buck brings similar knives with different blade shapes out.
@BeezBlades 2 жыл бұрын
That would be nice. We shall see!
@trlarosa 2 жыл бұрын
Thanks for showing the Wiha bit set! I needed a new one but was worried maybe the bits weren’t long enough to get at screws in pocket clip which is what I need. I’ll definitely use your links to amazon. Thank you!
@BeezBlades 2 жыл бұрын
You are welcome my friend! Happy New Year!
@David-uj2ms 2 жыл бұрын
You are the f'in man! I wanted to tighten mine. Now I wont strip the torx screws. Thank you so much for posting!
@donuilcelt8494 2 жыл бұрын
As YT keeps recommending your videos I keep seeing these older videos. I really didn't know Buck was having their knives made in China. Now I do like the look of this knife and don't hold its origin against it. But Buck is famous for its heat treat. I got a 110 that I have had for decades. This blade is not Buck heat treated, a shame, if it was a real Buck I would buy this in a heart beat. Now as of 2022 Buck has come out with the Buck 110 Slim Pro TRX and I hear very good things about it.
@williamyoung369 Жыл бұрын
You can get great deals on Buck 110's etc at pawn shops.
@jeremyspaulding7735 2 жыл бұрын
It's a very cool design coming from buck! Great video Beez 👍
@BeezBlades 2 жыл бұрын
It's pretty cool. I like the different design. Thank you brother!
@wesleyantwine5741 2 жыл бұрын
Hey so you your question regarding the hole on the blade. Actually used to open the knife. An old school method. Invert the knife in your hand and flick open with the hole. Blade will obviously open down. This method with cleavers was open down and slash up. Cheers.
@BeezBlades 2 жыл бұрын
Aha! Thank you Wesley!
@bubba92473 2 жыл бұрын
Thanks for the looksy Beez 🐝 🐝 🐝
@BeezBlades 2 жыл бұрын
You are welcome brother!
@dennyblancas8582 Жыл бұрын
Sweet little knife! I might have to add one to my wish list.
@newmanoutdoorsnewman5619 2 жыл бұрын
happy new year man
@BeezBlades 2 жыл бұрын
Happy New Year to you too brother!!
@_MiMo_ 2 жыл бұрын
I dig the bronze hardware against the black, maybe a tad too much on the backspacer. I like the overlay covering the lockbar. I want a 110 and 112 in the collection. Happy New Year Beez!
@BeezBlades 2 жыл бұрын
Agreed on the hardware. I does look good. Happy New Year brother!
@spydiho Жыл бұрын
I can't stop lookin at it!
@andrewlegg7198 2 жыл бұрын
Great content as always bro
@joekasperek1086 2 жыл бұрын
I'm a big buck fan still have my dad's. Think I will pick one up
@dougcfrary 2 жыл бұрын
Have always liked Buck knives.
@petehegedus5869 2 жыл бұрын
Everything in this review & unboxing video was excellent: the knife manipulations, disassembly, recommendations, comparisons, etc. Some of the voice over was a little like it was geared for preschoolers. I liked the content and presentation,
@Duunti 5 ай бұрын
Great review, cheers! ✌🏼 The hole and indent maybe to flip it open with your ring-finger. To get it off the security and then flick it open with hand movement.
@djglide69 2 жыл бұрын
Love this knife.. Have different style 110's including the auto.. Some tactical assist Bucks and this cleaver. Also some Spyderco, Civivi and Kubey's!
@BeezBlades 2 жыл бұрын
Sounds like a nice collection you have going! Happy New Year!
@bradbarber6186 Жыл бұрын
Love buck knives especially my buck 294gys2 momentum, for the price and being tungsten it is a wonderful knife.
@Mpafanai46 Жыл бұрын
One of my favorite buck, very affordable like the deep carry 😘😘
@silentblackdisc 2 жыл бұрын
I thought that lanyard tube might be a problem for total disassembly. I wish makers would forgo that design element (think Spyderco). I will have to take mine apart now that I see all the gunk that was in yours! Merci, Beez and Happy New Year!
@BeezBlades 2 жыл бұрын
Happy New Year!!
@rickeybullington6314 2 жыл бұрын
@@BeezBlades i like that watch you have on . What kind is it. And you have got to get your self a buck 110.
@matthewsalomone3800 2 жыл бұрын
So that's the blade design they decided to go with OMG...It looked so cool and I kept saying please have an awesome blade shape... And that would be a no ghost rider :(
@LegionTacticoolCutlery 2 жыл бұрын
Happy New Year!
@BeezBlades 2 жыл бұрын
Happy New Year brother!!
@dwaynemccoy9856 Жыл бұрын
Love my Buck cleaver
@johndaley6392 9 ай бұрын
The best budget D2 knife I’ve picked up recently is a browning buckmark slim large. For 35$ I was really impressed.
@just_nate_8694 2 жыл бұрын
I'll definitely be getting this one for that price!
@cbwelch4 2 жыл бұрын
I want it in a drop point.
@idwolverine1867 2 жыл бұрын
Looks like a pretty nice offering from Buck. I live about 10 minutes from the factory. Might have to grab one at the next factory sale. Thanks for the look
@BeezBlades 2 жыл бұрын
Oh, the factory would be interesting to see! You're welcome brother!
@gerrynightingale9045 2 жыл бұрын
@ID Wolverine *You SURE that 'Buck' is making that knife w/American 'drop-forged' steel and none of the parts are from China?* *I ask because the knife has obvious 'fitment' issues that are NOT 'laser-sharp' and I don't want to 'think what I'm thinking'* ( *That knife looks like a toy next to the '110'* )
@idwolverine1867 2 жыл бұрын
@@gerrynightingale9045 I didn’t state that it was US made. It is in fact an “import” but still backed by Bucks guarantee. They will still have this knife at their factory and therefore I’ll be able to pick one up directly from Buck Knives, hopefully during a factory sale. I personally have zero problems with China knives especially if an American company is profiting from the sale.
@gerrynightingale9045 2 жыл бұрын
@@idwolverine1867 *Thanks for 'clearing it up' for me* *I HAVE A 'PROBLEM' WITH INFERIOR STEEL and the fact that 'Buck' feels the need to 'bend over' for China and be a 'willing whore' for them causes me no grief either* *Let them have their 'profit'...but it won't be from me* ( *You're completely 'fulla' sh!t' on 'Buck' making a 'Buck' from using CHINESE CRAP STEEL gets around and the 'wailing & weeping and 'sack-cloth and ashes' begin because their buyers feel betrayed with their constant boasts of 'Made In America' when in fact its a LIE!* )
@durango8882 2 жыл бұрын
Made in China
@scottyh.6992 2 жыл бұрын
I like the scales on your Para 2.
@BeezBlades 2 жыл бұрын
Thank you! It was a gift!
@chadconkling7034 Жыл бұрын
Is there a reason why you put the cagebearings facing in opposite directions?
@BeezBlades Жыл бұрын
I prefer to put the bearings facing either the blade or the scales, depending on which one has a cutout. I don't believe it makes much difference, but there have been a couple knives that seemed to prefer one way or althe other.
@cdy9019 11 ай бұрын
The hole is there for if you get it stuck in bone or whatever, it works with batoning too. Put a piece of 550 in and make a handle and bam.
@barryhicks5836 2 жыл бұрын
I wonder if replacing those metal washers with Teflon would help???
@BeezBlades 2 жыл бұрын
I'm guessing just a new stainless washer would be easy enough, I'm not sure how well bearings do on Teflon. You've got me wondering now lol. Thanks Barry!
@cbwelch4 2 жыл бұрын
It is a nail nick to open. I think.
@jeffspears8801 2 жыл бұрын
Do you have any advice on dealing with stripped pivot screws on a new cjrb centros?I have the wiha bits,this one must be loaded with loctite.Thank you in advance
@BeezBlades 2 жыл бұрын
If you ever have a pivot screw that does not want to come loose, heat it up with a soldering iron or something of the like just briefly and that usually makes the loctite let go.
@BeezBlades 2 жыл бұрын
If you manage to get it loose then you could just contact cjrb and ask for a new pivot screw
@dannyparrish724 2 жыл бұрын
The anvil is a symbol of the founder making knives for WWI troops.
@BeezBlades 2 жыл бұрын
Ah, there we go. That's pretty cool! Thanks Danny!
@firestorm8471 2 жыл бұрын
Yeah,,founder would be ashamed of his family having knives made in china
@miguelperaza6615 2 жыл бұрын
Rather get a 3-1/2 in. Gerber mini , 08718. 6-1/8 " fully extended.
@katanasmith 3 ай бұрын
Try little finger flick with the grooved hole. I can't believe that you never had a 110? Come on! That knife was a revolutionary folder. Nothing like it at the time. You need to check one out. ❤
@pop4803 2 жыл бұрын
Buck and I go back to childhood been wishing they could get in the modern competition. I do think you got a secod.
@fredcourtney03 2 жыл бұрын
Very nice, very, very nice!!
@bronco1199 2 жыл бұрын
I picked one up yesterday, there a few negatives but man I'm super happy with it overall. I like d2. Not crazy about the pocket clip at all but wtv...
@BeezBlades 2 жыл бұрын
Finally! Someone else that likes D2! Yeah man, I like the feel of this one.
@bronco1199 2 жыл бұрын
@@BeezBlades D2 is a legit steel, tough, easy to sharpen and reliable. And I appreciate your opinion on steel and overall quality. This buck is beautiful and we can feel good about supporting a true American icon. Cheers brother 8
@jackslungs 2 жыл бұрын
Not a bad looking knife at all. That rust/gunk is really weird. Hopefully that won't be an issue for you in the future. Thanks for the video!
@BeezBlades 2 жыл бұрын
Yeah, that was weird. We'll see. You're welcome Jake. Thank you!
@ljaysperspective1775 2 жыл бұрын
It looks like a slick gentlemans carry to me. Priced reasonably for what your getting, appears good, D2 steel, Is D2, decent edge retention, tough, resistant, working the blade to get it nice and sharp may cost a little effort. I wouldn't mind a higher grade steel, but then the cost is going too shoot up. The model appears worthy though maybe buck should do another version in cpm-154 ? I would still buy this knife hands down. I've owned a few buck knives and I haven't been disappointed. Enjoy the review and the humor 😄 thank you👍
@BeezBlades 2 жыл бұрын
Oh man, could you imagine if they upgraded the steel! Yeah, it would cost more. I know, I know😄. I'm glad you enjoyed the review, and life is too short to be serious all the time! Thank you LJay!
@ljaysperspective1775 2 жыл бұрын
@@BeezBlades agreed👍
@GG-ml3vr 2 жыл бұрын
Blades a bit weird looking,this would be cool as a spear or clip point.Great value for money though,hows Buck qc nowadays?the mess inside didnt bode well
@BeezBlades 2 жыл бұрын
I like the "different" looking ones lol. I'm wondering if this was a return or something weird. It works very well now. I'm surprised there wasn't a silica pack with it.
@Sherrodja Жыл бұрын
good utility knife
@petehegedus5869 2 жыл бұрын
Really good review and disassembly, comparisons and manipulations. A lot of the voice over language was goofy (like for preschoolers). I like your content and knowledge.
@dustinrulo6337 2 жыл бұрын
Getting it!
@robertstrohlin6051 2 жыл бұрын
The hole is for a friction fire stick. The numbers are the actual production number the of knife itself.
@BeezBlades 2 жыл бұрын
See! That's another reason this community is awesome! Thank you Robert! 👊
@anthonyzornes8001 2 жыл бұрын
The buck is a great knife
@BeezBlades 2 жыл бұрын
It is a household name with knives!
@russellverdin8339 2 жыл бұрын
What's the hole in the tip of the blade used for?
@BeezBlades 2 жыл бұрын
Well, I've discovered you can use it to flip the knife open. I think they were going for the "traditional" cleaver look, where they have a hole to hang them from a hook/nail.
@cpoe4508 2 жыл бұрын
Just imagine this guy walks up to you in a bar and explains his knife for 24 minutes.
@mikebeddingfield2144 2 жыл бұрын
If not mistaken the hole in the blade is a wire stripper
@BeezBlades 2 жыл бұрын
Oh. That's an idea!
@jeroenvoss6231 2 жыл бұрын
I wonder why they didn't put stainless washers in there, well if you like screwing it's THE knife for disassembling... It's not the buck i would buy, because of the blade not being a cleaver, i'd rather buy a real cleaver or just a droppoint or clippoint. Materials are nice though except for the washers rusting. Thank you for the review BB and a Happy New Year.
@BeezBlades 2 жыл бұрын
You're welcome brother. I'm liking the weirdness of it, and I love the acoustics! Happy New Year Jeroen!!
@PapawHasThis1 2 жыл бұрын
My first good knife was a Buck 110 but it was stolen in 1978, less than a year after I got it. I finally got another one two years ago and love it. I plan on getting a couple more of their knives.
@mattharvey968 2 жыл бұрын
Only Bucks I’ve had are the Bantam series but this looks like one to get!
@BeezBlades 2 жыл бұрын
It's solid! I think I just got a reject, or one somebody messed with and returned, but it works great now!
@mattharvey968 2 жыл бұрын
@@BeezBlades glad to hear it’s working properly!
@miguelperaza6615 2 жыл бұрын
Second gen.bucks are real tough! 😌
@mikerobbins5049 2 жыл бұрын
Nice looking knife
@BeezBlades 2 жыл бұрын
I agree! It's different, and it's the first Buck I've purchased in ages! Thanks Mike!
@kenfaulkner5544 2 жыл бұрын
I like the idea of Buck Knives as an American classic but I haven't got one for the collection. The 110 is on my list but the back lock is not my favorite.
@BeezBlades 2 жыл бұрын
I've thought about the 110, but I'm not a "holster" on the belt type person. Doesn't mean it wouldn't be bad to have one lol! Thanks Ken!
@dwaynek.1293 2 жыл бұрын
Not bad a for a buck. I'd buy that for a dollar!!! 😂 I like Buck but the last three I bought I had to straighten out the bevels on the blade. I guess the hole "Is for lookin through".😊 That pivot is made by the acme ANVIL company.😊 Thanks for the video Beez. Happy New Year to you and Mrs. Beez.
@TopDog8762 2 жыл бұрын
This Buck is Chinese made. Just wondering the 3 that you bought were they American made?
@dwaynek.1293 2 жыл бұрын
@@TopDog8762 yes they were. I have a Chinese made buck too that I forgot about. My son sent it to me. It actually doesnt have any problems.
@TopDog8762 2 жыл бұрын
@@dwaynek.1293 Its sad to see all the problems that Buck has.
@BeezBlades 2 жыл бұрын
Happy New Year to you too Dwayne! Is that the same ACME that made stuff the Wile E Coyote?
@dwaynek.1293 2 жыл бұрын
@@BeezBlades yes. It was a reference to that, being that is an anvil on the pivot. Don't know if it's an acme ANVIL though. 😁 They just use anvils alot on road runner. " its for lookin through" is another reference to something. I'm 54 so you may not know and if you are not a Clint Eastwood fan you really won't know. Hint hint, nudge nudge.😊
@negolfman 2 жыл бұрын
The hole in the blade appears to be a larger finger nick to open the blade with two hands.
@BeezBlades 2 жыл бұрын
Definitely a good use for it. I can see hanging it from a hook while food prepping at a campsite too. Thanks negolfman!
@minceraftfornite4334 2 жыл бұрын
2:53 I think it’s a large nail nic to open the blade
@BeezBlades 2 жыл бұрын
It definitely works for that!
@mca1960 2 жыл бұрын
Oh, Buck's razor knife.
@Jay_M_See Жыл бұрын
Lol. It was wrapped up like a petrified fish knife.
@gene2024 2 жыл бұрын
The "plastic pry bar" is called a spudger.
@BeezBlades 2 жыл бұрын
Thank you! Now if I can only remember that hahaha. See! A perfect example of this community helping each other. If one person doesn't know something, the other will. Thank you Gene!!
@cueball981 2 жыл бұрын
Beeeeez!
@BeezBlades 2 жыл бұрын
Cueball!!!! Happy New Year!!!
@timcook2524 2 жыл бұрын
Always have loved Buck knives. I just can't see to keep them, lost in the river, broken, stolen. I might just have to try this one and lock it up with the only one I have left which is one my daughter gave me when she was little 20yrs ago. Great review as always.
@BeezBlades 2 жыл бұрын
Chained up with the lanyard hole hahaha. Thank you Tim!
@gordontrainer3546 Жыл бұрын
I love bucks.
@TopDog8762 2 жыл бұрын
Hey First off congrats on busting 3K. That's going to make for a Happy New Year. Rust in the Pivot? I have one of these and mine actually was very clean. The whole area around the Pivot looked scratched. What the heck was it done by a crack head late on a Friday at the factory? Yeah you said it, that is no Kizer. Mine the action is superb for deployment and shake closed. I like the looks the contrast of the materials and the ergos fit me very well. For the money its a good value, but that is if you get one without rust. Maybe Buck should see if Kizer would make their knives?
@BeezBlades 2 жыл бұрын
Hahaha, right! I'm so used to breaking down a Kizer and it being clean. I like it! It makes an awesome SNAP when opened. I'm sure a lot of people get knives that are a little "messed up" inside, and they never know it because they don't break them down. Thank you for the congrats TopDog8762! I didn't think we would break the 3K mark before the new year. This has been an exciting year, and I can't wait to see what 2022 has in store!
@donuilcelt8494 2 жыл бұрын
@@BeezBlades I don't mean to butt in on your converstation. Just want to say that rust probably came from the steel ball bearings? You all probably already know this but you can buy bearing assemblies online, ceramic ones to replace those steel bearings. Once rust starts you really can't stop it.
@kerrykitterman4602 2 жыл бұрын
Nice , would rather see upgrade Steel 👌 but cool. BUCK.. front groves and hole could be a Nail. Nick Use . 👍🙂
@BeezBlades 2 жыл бұрын
I've discovered that I can flick it open with it. So, more than one use is always awesome! Thank you Kerry!
@yuvgotubekidding 2 жыл бұрын
That’s a very nice design. I can’t stand the look of the usual stonewash on blades. Makes them look cheap. But this style of stonewash is quite pleasing to look at. That debris and washer is not cool though.
@BeezBlades 2 жыл бұрын
It's a very aesthetic Stone wash. Hopefully I just got a dud or a return or something. Happy New Year!
@bapd158 2 жыл бұрын
Why not…….ordered.
@BeezBlades 2 жыл бұрын
It's a pretty neat knife! I didn't let the washer ruin it for me!
@austinjay5915 2 жыл бұрын
I just love that you do budget knives. A lot of the channels are reviewing knives in the 200 to 300 dollar range.
@BeezBlades 2 жыл бұрын
Thank you man! I enjoy the unbelievable variety available in the under $100 club!! Thank you austin jay!
@ericpitre4031 2 жыл бұрын
Its all fixin to end~these reviewers making bank$80 plus/yr. Sadly the market is flooded but thats not the reason
@BeezBlades 2 жыл бұрын
I would like to know what knife reviewers are making that kind of money. That would be nuts!
@ericpitre4031 2 жыл бұрын
@@BeezBlades dont kid us or yourself. Its ending soon. It was a good run of titanium s35 stuff, etc. they all be’s sittin on the shelf soon as soon as the money dries up. We’ll be back to G10~s30 an 8cr before long.
@TopDog8762 2 жыл бұрын
@@ericpitre4031 Dude you know for certain knife reviewers making that kind of bank? Got any proof? I would like to know who is making that kind of money. Unless of course you meant eighty dollars a year and not eighty thousand.
@miguelperaza6615 2 жыл бұрын
Thumbs up 4 your nice watch too 👍
@G56AG 2 жыл бұрын
That knife is kind of purdy! As my dear departed Daddy used to say "That hole is there to make you ask questions." 😆
@IStandWithHarvard13 2 жыл бұрын
🤣🤣🤣🤣💯💯 That's exactly what my grandfathes & father would say about that whole.
@jeffball6265 2 жыл бұрын
The making of a classic ?
@BeezBlades 2 жыл бұрын
It could be! it sure has the look!
@stuartmarkman769 2 жыл бұрын
Sorry. Made in China and over 44.00 on Amazon
@robertfeely8775 2 жыл бұрын
Maybe my first cleaver?
@robertvance1873 2 жыл бұрын
Nice knife, New Subscriber
@BeezBlades 2 жыл бұрын
I agree! Welcome, my friend! It's so awesome to meet new people in the knife community! I'm glad you found us!
@robertvance1873 2 жыл бұрын
@@BeezBlades thank you
@johnwaddell1915 2 жыл бұрын
Dlt trading has some cool stuff 😎
@BeezBlades 2 жыл бұрын
Yes, they do. I need to check them out more!
@BensBlades 2 жыл бұрын
FIRST!!! Happy New Year!!!🔪🖤🗡
@BeezBlades 2 жыл бұрын
Happy New Year!
@SquireSCA 2 жыл бұрын
What I have found over the years of reviewing knives, is that US knife companies that outsource to China... Buck, CRKT, Gerber, etc... the quality of the product is nowhere near as good as the actual Chinese companies that turn out their own stuff. WE, Civivi, Artisan, CJRB, Canku, Petrified Fish, etc... All those Chinese brands are cranking out knives that are way better than the US brands that use China for cheap labor.
@MrJohn714 2 жыл бұрын
Aluminum on steel lock bar would be a deal breaker for me.
@BeezBlades 2 жыл бұрын
I'm listening. Is that bad?
@MrJohn714 2 жыл бұрын
@@BeezBlades Just my opinion but I would prefer steel on steel due to the fact that aluminum is soft and would be prone to wear and there may also be a lock stick issue with the aluminum on steel. Other than that I do like the knife.
@robertstrohlin6051 2 жыл бұрын
What knife collector doesnt know what an anvil is dude!?
@BeezBlades 2 жыл бұрын
A knife collector that has only been collecting a year, I suppose. So, what is it?
@lifeoutdoorcolection 2 жыл бұрын
Top
@dienzengua652 2 жыл бұрын
How much
@BeezBlades 2 жыл бұрын
Less than $40. There are links in the description of this video. Thank you for asking!
@cavalosecavaleiros3276 2 жыл бұрын
Muito bonita sua navalha, parabéns, abraço de cavalos e cavaleiros do KZfaq, Brasil.
@BeezBlades 2 жыл бұрын
Obrigado! É ótimo ouvir entusiastas de facas em outros países!
@raybo34 6 ай бұрын
I really like the disassembly in the video. Tells a lot about the knife.
@hilltopper600 2 жыл бұрын
not rust but brass
@robertstrohlin6051 2 жыл бұрын
Oh my Fuckin god dude just open the Fuckin box already!!!
@BeezBlades 2 жыл бұрын
You don't have to be hateful about it. I welcome criticism, but geez was that necessary?
@TopDog8762 2 жыл бұрын
🤣🤣🤣 Perhaps a little less caffeine brother.
@marciogaroupa9110 Жыл бұрын
Comprei 01 hoje 23/05/2023.
@bearbreath180 2 жыл бұрын
I'm going to have to say that is a very beautiful buck knife I would not mind owning it
@BeezBlades 2 жыл бұрын
I could totally get behind Buck putting some more along these line out there for us! Thank you Bear breath. Love the handle!
@beanalog8202 Жыл бұрын
hmmm why does the box say made in China?
@bobd.fletcherjr4912 2 жыл бұрын
👍👍👍👍👍
@perrykomick9478 2 жыл бұрын
Sad when the Chinese made Bucks are better than Idaho mades ones
@TopDog8762 2 жыл бұрын
It is rather disheartening
Best Knife Brand? Benchmade, Buck, Zero Tolerance, Spyderco, Cold Steel, Kershaw, SOG, CRKT, Ontario
Project Farm
Рет қаралды 3,3 МЛН
Zac In The Wild
Рет қаралды 231 М.