'UNDER'-rated mod for the 370z Fismo Owners | Z1 Undertray Install Guide

Рет қаралды 4,147

Жыл бұрын

This Z1 Motorsport Aluminum Undershroud (undertray) does not only protect your engine from the road but also supports the structural integrity of the front bumper to avoid flexing, and it helps with engine cooling.
FOLLOW ME
Channel Instagram: @its.ericvenzon
Photography Instagram: @vndrdog.media
It's Eric Venzon publishes automotive, photography, and technology contents located in Southern Alberta, Canada.
#370z #Z1Motorsports #Nismo

Пікірлер: 27

@javiercontreras7689 Жыл бұрын

thank you man, my trays been sitting in my garage for a year because I was too scared to drill the holes in my car but seeing you do it gave me confidence. gonna install this week on my z :)

@ItsEricVenzon Жыл бұрын

Awe sweet! I'm glad this video gave you the push you need! Good luck man

@diegoalejandre3412 7 ай бұрын

Swear mine got here about a week ago and was debating on paying someone but I think I might get to it this Sunday

@chowtoo2092 2 күн бұрын

Thank you for the video. I also took over 3 hours to do mine because of the rivnut tool. It was a real pain, but in the end worth it.

@ItsEricVenzon 2 күн бұрын

@@chowtoo2092 you bet man! Yeah the rivnut was an atrocious experience but that's about it 😬

@antraxxxvlogz576 Жыл бұрын

You are an inspiration to me and each and every one of your modifications I have followed to the letter thanks for detailing your videos

@ItsEricVenzon Жыл бұрын

Brooo. Thank you so much 🥹 this means a lot to me. I'm happy that my videos helped you guys!

@redinteggy2007 Жыл бұрын

When you installed your nismo front bumper did the non nismo fender liners fit fine or did it leave a gap?

@ItsEricVenzon Жыл бұрын

My non nismo fenders are fine, no obvious gaps.

@Josh-jh6tl 9 ай бұрын

hey man I want to get the weber sport bumper would I still need to get the nismo one or can I get the regular under-shroud

@ItsEricVenzon 9 ай бұрын

Hey dude, apparently you can run the Weber front bumper with the non-Nismo (base/standard/regular) undershroud. Good luck!

@ztepbroo 9 ай бұрын

so were u using the stock base undertray on the nismo bumper? did the stock fender liners also fit well with the nismo bumper? Would highly appreciate ur help!?

@ItsEricVenzon 9 ай бұрын

Yes, I was using the stock plastic base undertray for months after doing the front bumper conversion. The stock base fender liners fit perfectly fine with the Nismo front bumper so all I had to replace was the undertray. 😊

@ztepbroo 9 ай бұрын

@@ItsEricVenzon tysm king

@ItsEricVenzon 9 ай бұрын

@@ztepbroo got you fam ✌🏼

@Chris-nq3et 7 ай бұрын

@@ItsEricVenzonis there a big gap with the stock fender liners on the nismo bumpers?

@ItsEricVenzon 7 ай бұрын

@@Chris-nq3et are you taking about the corners? There's a piece that goes there called a front bumper protector. Check my nismo front bumper conversion video

@projectnemesis8274 5 ай бұрын

Are the nylon spacers provided?

@ItsEricVenzon 5 ай бұрын

Yes sirr

@Blballerboy Жыл бұрын

Any advice on keeping a black car clean?

@ItsEricVenzon Жыл бұрын

You can't. I mean, I can't. It's just the worst color to own. 😬 All jokes aside, doing ceramic coating on a black car is the best advice i can give you but you'd still need to rinse it every now and then

@seethruhead7119 Жыл бұрын

wash it!

@00j80 3 ай бұрын

Get a 10 Pack of Micro Fibers and a Speed Detail Spray and Get into the habit of wiping every 3 days.

@sxnchez34 10 ай бұрын

I thought this instalation would be easy. My dumbass dont know how to use a rivet tool and and im hella confused on why people are drilling holes besides the 3 already made holes.. fuck me.

@ItsEricVenzon 10 ай бұрын

The fact that they didn't include a drill made it somewhat difficult. You're just making the hole bigger for the rivet so you can bolt the panel A and B together to the core support.