the broom thing nailed it perfectly. i think i get it now.
@mikecr49163 ай бұрын
There needs to be dynamic and static (separate) swing weight standards.
@tref51 Жыл бұрын
If it’s only for graphite shafts…..how come Jack Nicklas used it on steel shafts
@playrac Жыл бұрын
If the center balance point of my irons is more at the bottom or middle, what is the difference on ball trajectory on lower vs middle balance point
@groundskeeperwilly13 жыл бұрын
great explanation. thank you
@55331954 Жыл бұрын
3:10 I just bought a G410 Plus with the Regular Flex Alta CB 55 Red Shaft standard grip…I have arthritis and need to replace the grip with a jumbo size one… How does that affect the swing balance and what should I do? Thank you… Greg
@agustinfeliciano97153 жыл бұрын
Good one!!!
@todpharis4996 Жыл бұрын
What are the downfalls or negatives of a counterbalanced shaft? Only positives listed in this video.
@golfish8589 Жыл бұрын
I want to lengthen my g425 graphite irons. I hear they may be counter balanced. If they are. How do I go about lengthening them if there is a weight plug? And what would the id of the shaft be?
@ruggerboy6006 ай бұрын
Hi can you add an after market counter balance weight to the butt end to help lower the swing weight and make the head feel lighter?
@gavinkh66585 ай бұрын
I also dont get it? Adding weight to the butt will move the balance point closer to your hands but you are adding more mass that has to be accelerated in the total system. Counter balance does not "counter" mass... just the balance point?
@CallMeJackWagon Жыл бұрын
My Mavriks feel very numb, as in I cannot tell where the clubhead is during my swing. We swing weighed them to D2 thinking that might help but it actually feels the same. Very numb. Would removing that tape and counterbalancing help with this feeling? IIRC, the shafts are 90g S300 if that matters. Thanks
@8snowman882 жыл бұрын
Should I be using a CB shaft for my 2017 M1 driver?
@markpilutti45322 жыл бұрын
If I cut my cb alta shaft down .5 or 1 inch, can I use extra weight in head and grip to help get swing weight to where it should be. Or should I only do one or the other???
@timothymull25703 жыл бұрын
so can you use a CB shaft in a 3 wood
@MarkArnold92660 Жыл бұрын
Good video! Does anyone know approximately how much weight is in the handle of a Hazrdous CB 50 Red??
@chuckgame4210 Жыл бұрын
so have heavy has you gone ? or light. pros and cons ? actual customer extremes.
@Henry4PC3 жыл бұрын
I bought a 46” inch counterbalanced Evenflow riptid 60g 5.5. How do I properly cut it down to 43.75”?
@markking37793 жыл бұрын
Hi...I did not think the AD IZ was a counter balance shaft?
@GBMoto3 жыл бұрын
Can you achieve the same affect of a counterbalanced shaft by swapping out for a heavier grip or even adding lead tape, plugs, etc under the grip?
@ryanbarath19163 жыл бұрын
Bingo! any extra weight in the handle will counterbalance a shaft; lead tape, heavier grip etc.
@ilovebigputtsandicannotlie53553 жыл бұрын
Can I apply lead tape to upper part of my shaft? Or does it have to go under the grip?
@swrveGaming Жыл бұрын
@@ilovebigputtsandicannotlie5355 I know this is such late response 😅 but I have heard of ppl doing this and working
@marcrichards79463 жыл бұрын
More swing speed by adding weight to grip?
@stumarston68123 жыл бұрын
Jack Nicklaus used to put lead tape under his grip. Others have done it too.
@biggregg53 жыл бұрын
I'm having trouble finding an answer to a question about some MacGregor V-foil forged m545 irons that came out in 2005. Does anyone know if they're .370 pt or .355 tt?
@ryanbarath19163 жыл бұрын
.355T if they are stock.
@biggregg53 жыл бұрын
@@ryanbarath1916 Thanks.....I think they are. They've got Rifle lite and Golfpride grips. I think that was the stock option. I'm considering pulling them and going with graphite.
@TKPak13 жыл бұрын
So if one wanted to shorten a shaft to play 45" instead of 45.5",it would be more advisable to cut from the tip? How would this affect he shafts performance?
@martcoombs90312 жыл бұрын
cutting from the tip will stiffen the shaft
@danedsa2 жыл бұрын
I’ve got a Cobra ltdx with Hzrdus blue counterbalance shaft. If I swap shaft to a non counterbalance shaft, will it increase the swing weight of the club?
@jacobr45583 ай бұрын
Yes
@joshuawilliams32212 жыл бұрын
So is Ventus black counter balanced?
@IMon5032 жыл бұрын
What shafts are counterbalanced?
@midlifebiker74242 жыл бұрын
I use Tensei AV orange which is CB and works for me. I know Hzrdus smoke yellow is CB as ive also owned that..