In this episode of Steve Tech, Steve Morris picks up from the Part 1 video to explain what you need to know for proper valve spring set up and how to prevent spring surge.
Пікірлер: 21
@nadronnocojr3 жыл бұрын
Top notch mr Morris !
@grantk.38603 жыл бұрын
Thank you for sharing your awesome knowledge!
@boharris8179 Жыл бұрын
I've watched this video a couple times and it still look up SteveTech to be reassured I'm making the right decision buying expensive conical springs or at least Ti retainers
@AndyB7183 жыл бұрын
Ty for taking the time and explaining it,so it's understandable.
@jaysfasttoys3 жыл бұрын
Interesting, thanks for the tech tip
@bryanemerson56192 жыл бұрын
This was exactly what I needed to hear. Thank you.
@glenbrannon72243 жыл бұрын
Awesome information!
@ercost60 Жыл бұрын
I like the single beehive except it lacks the redundancy of multiple springs. If the beehive breaks, there's maximum valve-piston damage. Good for machine shop business though.
@marcwalker90359 ай бұрын
Valuable..explanation 😮
@RickHopfingerJustAddWaterHydro3 жыл бұрын
welcome to the sme institute, great vids thanks
@Keyno773 жыл бұрын
Easier to understand, the spring begins to bounce at hi rpms when coil bind is more than 100/1000" 😅
@john-martin3 жыл бұрын
Thank you, very well and clearly said.
@Jenkins13714 күн бұрын
So do you think a .660” set of dual springs and retainers is too large for a .560” cam shaft ? Turbo 4.8 ls set up
@davidsawyer15993 жыл бұрын
Appreciate the info. Have a suggestion. If possible load videos in order in the playlist. In other words the playlist plays the latest video first instead of the first in a series. Thank you.
@phillipfilides58942 жыл бұрын
Can you use springs from a cast iron head on aluminum head
@ErnestoSantana-kq2im3 ай бұрын
Hello my friend, I would love to know if you can tell me what's the max lift these springs can handle, here are the springs specs: seat load 136 lbs @ 1.800'' , open 412 lbs @ 1.170'' , spring rate 438 lbs/in and coil bind 1.125'' , thanks in advance
@montestu5502Ай бұрын
0.615” if you are shooting 0.060” from coil bind. 1.800” - 1.125” - 0.060” = 0.615”
@michaelwalker479910 ай бұрын
IF YOU ARE CLOSE TO BIND AT FLOAT IT WILL BAERLY BIMD IN DOING THIS ITV WILL RESET THE SURGE I SET BIND AT .050
@russellhueners84993 жыл бұрын
One engine builder on you tube had a .010 clearance on his head set up, came here to check,,yeh I was rite 050-.080
@michaelvanparis92362 жыл бұрын
Russel, Just asking but…Was he measuring his .010 in between the coils or was he actually .010” from coil bind? because if he was measuring in between spring coils and there’s 6 coils then he’s right in the range that would in fact be .060” from coil bind.