Unlock the Potential of Your Old Hard Drives: Build a Drone Engine!

Рет қаралды 1,289,827

4 ай бұрын

Don't Throw Your Old Hard Drives Away, Turn It Into a Drone Engine
Hello, friends! Today, I'll show you how to repurpose your old hard drives into a drone engine instead of tossing them in the trash. In this fun and creative project, you can use those unused hard disk drives to create your own mini drone motor. Watch our video for a step-by-step guide on how to turn your old tech into something exciting and useful. Join us in this enjoyable project that not only sparks creativity but also promotes an environmentally friendly approach. Don't miss out on this video for more information and details. Happy watching!"
👉Get a free trial of Altium Designer with 365 and 25% off your purchase :
👉 www.altium.com/yt/ZAFERYILDIZ 👈
👉Learn about Altium 365, the electronics product design platform that unites PCB design, MCAD, data management, and teamwork: 👉 www.altium.com/altium-365
👉Free search engine for the best quality components from Octopart:
👉www.octopart.com
***🚀 Welcome to My Channel! Subscribe and Share the Excitement! 🚀
Hello, friends! Are you ready to join this adventure filled with technology, entertainment, and creativity? Our channel offers a world of new projects, interesting experiences, and videos related to the latest technology every week.
🌟 Why Join Us?
✅ Fun Projects: Projects that revive old technologies, extraordinary experiences, and more!
✨ Creative Content: A platform full of content that triggers your imagination, makes you think, and surprises you.
🔧 Journey into the Tech World: Stay one step ahead with the latest technology news, reviews, and interesting information.
🔔 Don't Forget to Subscribe! We're here with new videos every week and can't wait to share more content with you. Subscribe, click on the bell icon to enable notifications, and join us on this exciting adventure!
🚀 Share and Support! If you love our content, please share our channel with your friends. Let's grow together and have fun together!
👉 Click the Subscribe button and join us on this thrilling journey!
Thank you, we appreciate your support! 🙌💙. ****
#altium
#zaferyildiz
#hdd
#drone
#electronics
#esc

Пікірлер: 299

@diddd4970 13 сағат бұрын

The magnets are also interresting!

@rikisurio2431 2 ай бұрын

Thanks for sharing this very useful tricks, Bro. Appreciate it.

@adrianwhitefang7615 4 ай бұрын

Thanks for this video. Can you make a video with the ESC that you used here?

@AlirezaMirhabibi 3 күн бұрын

One of the most beautiful tutorials. Thanks

@leflamantrosefpv1725 3 ай бұрын

dream dream dream.. make the drone!

@gunaratna123 4 ай бұрын

I like your short and useful videos always. Thank you. I have a problem about brushless motors. We can find out such motors easily but it is difficult to find circuit diagrams for brushless drivers. I could not find such a one from your videos also. could you please publish such a circuit? And, can we get a higher speed from stepper motor also? Can you publish stepper motor driver also? Thank you.

@amaury1961 3 ай бұрын

Eres un ignorante, los motores paso a paso, no fueron diseñados para velocidad 😅😅😅😅😅😅

@franklydude 3 ай бұрын

100's og brushless motor drivers for RC vehicles,!! 100's Aliexpress, Banggood, ebay etc... 1-2ms input from RC channel...

@suskun561 4 ай бұрын

elinize sağlık ustam çok basarili

@gara737 20 күн бұрын

now that's a cool little project for a turbo pc cooling. thanks🎉

@syamilulmunsyid 3 ай бұрын

keren banget idenya mantap

@frandei4416 4 ай бұрын

Soy nuevo y novato en la electronico pero esto es fascinante una prueba del ingenio humano me recuerda al maestro humberto higinio ser posible en un futuro un tutorial de un dron casero? Seria fascinante❤❤

@Royer_-qd4bn 3 ай бұрын

Humberto Higinio, un crack, de dónde eres?

@frandei4416 3 ай бұрын

@@Royer_-qd4bn soy de panama

@Educomp55 3 ай бұрын

Estava esperando um circuito para sincronizar os motores, isso é só o começo de um drone

@ziyaozdemir5848 3 ай бұрын

Teşekkürler Zafer bey

@rokag3332 3 ай бұрын

those disks make perfect reflector laser for experiment in optic and you also have very strong magnets

@chrislong3938 Ай бұрын

They also make great wind chimes or the backing for a cool analog homemade clock!

@juancarlossanchez118 4 ай бұрын

Muy buen experimento sobre cómo reutilizar ese estupendo motor.

@Raploc 4 ай бұрын

Cảm ơn bạn chia sẻ 👍👍👍👍

@luizfernandolessa1889 4 ай бұрын

Esse motor é muito bom e silencioso. Sugiro colocar outro tipo de hélice que seja mais silenciosa e, se possível, com tua engenhosidade, fazer um pequeno ventilador oscilante. Bom ano novo.🇧🇷👍🏽

@ZAFERYILDIZ52 4 ай бұрын

Eu não tinha outra ventoinha em mãos, você pode usar esse motor com tensão de até 100 volts, mas a ventoinha que eu tinha não aguentava essas velocidades, então não forcei.

@luizfernandolessa1889 4 ай бұрын

@@ZAFERYILDIZ52 Agradecido.

@tuir52 3 ай бұрын

Falou gaúcho...kkkk.

@luizfernandolessa1889 3 ай бұрын

@@tuir52 Não sou gaúcho, mas gosto da maioria das coisas do RS. Inclusive assisto um canal de eletrônica de lá. Abraço.

@smecherusmecheruu1688 3 ай бұрын

DRONE WHEN ? you are a fake @@ZAFERYILDIZ52

@elektron3510 4 ай бұрын

Ellerine sağlık çok beyendim

@chrislong3938 Ай бұрын

The magnets for the actuator are neodymium! Fun to play with!

@williamrowe8545 Ай бұрын

What speed adjusting product did you use to attach to the simonk30A ESC to control motor speed?

@andrievbastichy8551 2 ай бұрын

what is the electric screwdriver name/brand etc.. any links? for the rest of the equipment too.. thanks

@williamvan909 3 ай бұрын

😊 would make a Great tail rotor good 👍 idea 💡

@nizarkailani6463 3 ай бұрын

If you cut off the sides on the motor body you may have much better weight , also they make 15000 rpm hard drives, i think that would create great lift

@MaurilioTellesMurilo 3 ай бұрын

Bom 🎉 as hélices na muito bom para drone, um super cooler ficou🎉 👍

@MarcosBeatles 3 ай бұрын

exatamente

@Suavache 4 ай бұрын

Động cơ mạnh mẽ được tận dụng từ ổ cứng PC rất tuyệt vời xin cảm ơn đã chia sẻ với khán giả

@mamaicupjayachanel2512 5 күн бұрын

wow..sangat menabjubkan..❤❤❤👍👍👍🙏..

@ronnybru1639 2 ай бұрын

Cool video. I fly Pro Drones from DJI but it would be fun to build one myself. Just to make it fly.

@faruksinan7920 Ай бұрын

eline emegine sağlık başarılı

@luizantoniodasilvapereira3837 4 ай бұрын

Excelente dica gostei parabéns👍

@michaelbailey7472 18 күн бұрын

I 😊

@subhanbedahan 2 ай бұрын

wow sangat menginspirasi

@egehanzekeriyadundaroglu2182 4 ай бұрын

4 eski harddisk ile birlikte beklediğimiz o video

@ZAFERYILDIZ52 4 ай бұрын

👌

@sinanyc.2105 4 ай бұрын

Emeklerine sağlık ustam hdd motorlari ağır oluyor uçuş icin pek kullanışlı degil ama soğutma ısıtma islerinde yada birazda tork saglana bilirse rc araclarda 10 numara iş yapar tabi benim kendi fikrim usta artik bu motorla bir proje yaparsın inşallah selametle ustam simdiden hayırlı cumalar selamlar 🤲👍❤️

@odszczepciesie5128 3 ай бұрын

Nie znam się na tym, ale chodzi mi po głowie, żeby wykorzystać taki silnik w turbinie wiatrowej do generowania prądu

@sinanyc.2105 3 ай бұрын

Evet olabilir😊👍 guzefikir l@@odszczepciesie5128

@shatunyra 3 ай бұрын

good job!

@serjao5437 3 ай бұрын

Dica legal, tenho varios HD's antigos, vou fazer experimentos.

@zedium Ай бұрын

Does it have much power to pull up 4 motors and other stuffs such as battery used in drone?

@josevencatareddy5084 3 ай бұрын

I saw a fan turning at 7,000 RPM and not any DRONE to show it capacity to act as so. The cooling fan has no aerodynamic profile , may be you should test it with a Drone propeller to show if it can lift a battery and all the stuffs together . Does that motor has enough torque to turn a real propeller at 7,000 RPM ?

@swyntopia 3 ай бұрын

It depends on the airscrew !

@mdd3161 Ай бұрын

Bravo majstore

@GamalielAlexandrino 4 ай бұрын

Top vou usar sua criatividade

@ZAFERYILDIZ52 4 ай бұрын

👌

@vtms 3 ай бұрын

many ideas

@JesseBlum 14 күн бұрын

UMMMMMMMMM Thank you bro honestly. If i would have sold all my harddrivess and then saw this without trying oh i would be mad. do you have a link for the esc speed controller you use or a video on how you set that up

@FatihEgemen-hp8ck 4 ай бұрын

Mrb zafer bey elinize sağlık... Benim merak ettiğim şu ki; bu motorlar ne kadar güçlü dron değilde acemice bi çim biçme makinasına çevirsem yani gerekli uzatma malzemeleri ile ucuna bu motor u baglasam cd gibi cıkardıgınızın parça yerine 2 3 mm lik plastik sıkıştırsam iş yaparmı sizce...

@hakgg2874 4 ай бұрын

çim biçme ihtiyacınızı karşılacak kadar güçlü değildir

@FatihEgemen-hp8ck 4 ай бұрын

@@hakgg2874 teşekkür

@RUYVINHAL 4 ай бұрын

Tem alguma dica para remover o motor de um hd que não têm os parafusos?

@fatihselimozercan4141 4 ай бұрын

İyi fikir.

@TheOnlyonejeep 2 ай бұрын

that looks cool...what is under the heat shrink how is it wired to motor? that is puzzling

@PrinzKenny1 2 ай бұрын

Under the heatshrink is an ESC. Since hard drive motors are BLDC motors, they have 3 phases whereas each phase is connected to a pair (or multiple) of coils inside the motor. Normal DC motors just require + and - and they run. For BLDC motors it's different because you need to turn on and off the coils in a specific order and at the right time. That's what the ESC does. A simple ESC contains 6 mosfets to be able to spin the motor forward and reverse (some might only have 3 mosfets, which would result in only forward motion. You can take a look at full H bridge or half H bridge if you want to take a deeper look). Besides the mosfets there's also an IC which does all the calculations for controlling the three phases according to the input signal from the potentiometer. There's way more to it, but I hope this helps for a brief understanding of what's going on :)

@beingsentient Ай бұрын

Very good. Thanks. An additional evaluation of the result would be to mount it at the end of a light pole with a light base and stand it upright on a digital scale. Zero out the scale and the reading would measure the thrust. The pole allows the fan to operate more or less in open air, giving a more realistic result for a drone. Where did you get the power control board? I do suggest that your videos can eliminate much idle time by fast forwarding the tedious tasks like unscrewing parts. Also, the background music is very annoying to me. I'd much rather hear the sounds of your work.

@hobielektro 4 ай бұрын

Mantap sahabat ku

@DIY_ideas8219 Ай бұрын

great video thank for share

@agustinblanco5326 5 күн бұрын

seria interesante hacer un lavado ultrasonico, tiene pinta que puede generar vibraciones potentes

@betopx2 4 ай бұрын

The circuit that controls the motor is missing. Is there a simple circuit that does this?

@GiovanniMelendez Ай бұрын

Serviría como ventilador pero como motor para un dron lo dudo mucho. Los motores de los drones pueden girar entre 10.350 y 41.000 revoluciones por minuto (RPM).

@robcat7499 3 ай бұрын

Was hoping for lift off with that strip of electrical tape. That would have been an affordable propeller for a drone.

@Abszurdista-fatalista 2 ай бұрын

When did they start to make the hard drives with brushless motors?

@fepelixpi 3 ай бұрын

No puedes pasar enlace de lo que conectas antes de oa batería? O explicar como lo haces

@CamTV-mk6qs 6 күн бұрын

oh good

@iFound99 Ай бұрын

Great ❤

@giovannisalaris792 3 ай бұрын

Ciao che tipo di ESC hai usato ...grz 🖐

@LakhsTsoyknikas 3 ай бұрын

ITS SIMPLE NEVER GOING HDD TO CARBAGE ITS USEFUL.FANTASTIC VIDEO

@leonardovelasquez7621 4 ай бұрын

Donde consigo los circuitos para hacerlo

@mr.electronx9036 12 күн бұрын

maximum speed!

@gaudibursch279 Ай бұрын

Super!

@tunamadanoglu 23 күн бұрын

Emeğinize sağlık. Öylesine akışta denk geldi baktım. Enteresan şekilde yabancılar daha çok yorum yapıp teşekkür etmiş. Bu neyin göstergesi acaba 🙂 Genel olarak okumuyoruz, araştırma yapmıyoruz, bunun gibi DIY projelerle pek ilgilenmiyoruz sanırım. Belki de günlük kaygılardan fırsatı olmuyor insanların. Emin olamadım.

@josuestuardoreyesestrada1134 21 күн бұрын

Podrías indicar que componentes usaste para hacer pasar energía al motor estoy interesado en comprarlos, por favor

@josefhunne5500 3 ай бұрын

Hübscher E-Schraubendreher!

@wooduniversity7109 Ай бұрын

It would at least make a pretty badass little desk fan.

@user-hr7qw5dd9v Ай бұрын

Блин! А точно! Я думал че оттуда вытащить. Он же рассчитан на большие обороты и постоянно крутить! Это же для ВЕНТИЛЯЦИИ самое то! И обороты и бесшумно! В трубу засунул и готово. Спасибо.

@mustafatomen8299 4 ай бұрын

Hocam merhaba. Harddisk motorunu direk 12v vererek calistirmak mümkün mü?

@o.fluoglu 4 ай бұрын

hayır motor sürücü şart

@Oberhacker 3 ай бұрын

hay que peligro esos dedos..... XDDD estos motores tiene mucha fuerza

@Brown_Buffalo 4 ай бұрын

Some of those motors can reach speeds up to 10,000 rpm’s. I know I have about 50 of them

@tasleemansari4267 3 ай бұрын

Good

@juancarlossanchez5650 2 ай бұрын

claro que si, omg

@enginkusak7095 3 ай бұрын

Bu disklerin motorları 12V. ile çalışmıyor mu? 12 Volt ise amatör drone motorlu olmaz kanısındayım.

@szek51 Ай бұрын

super

@Ozzy3333333 Ай бұрын

If that thing dont put an eye out, its going to be drawing some blood, lmao!

@josperado Ай бұрын

Напряжение поднимается до 18 без проблем. :)

@nelmanmolina7070 4 ай бұрын

Qué tipo de módulo es ese con el que controlas el motor?

@mojtabaz198 4 ай бұрын

دیمر

@consentofthegoverned5145 3 ай бұрын

Those cpu fans are not meant to spin that high RPM and could shatter causing injury.

@PerilousPaddy 2 ай бұрын

Not to mention that it wasn't even close to being balanced lol

@djmskywalker6459 Ай бұрын

Cool

@cetintori Ай бұрын

Está tentando reenventar a roda, existem os motores sem escovas bruschless que seriam mais potentes e mais leves!

@user-dh4ub1vm7o 4 ай бұрын

good idea, motor just does not have enough balls though, (i don't think ), but i have been wrong before though.

@tutoriales_360 3 ай бұрын

Podrías probarlo con élices de dron

@georgeh9967 4 ай бұрын

did not look like it had the power to lift itself, even without a battery

@DavidSmith-dm8ew 4 ай бұрын

nice fan but... useless for rc!

@Bueno336 3 ай бұрын

É lógico que não 😂

@Oficina2tempos 3 ай бұрын

A hélice e mais pesada que o motor e tem muito pouco arrasto para o seu peso

@IMETMIRANDAM 3 ай бұрын

La solución está en el diseño de las hélices

@user-ty8sk6vc9l 2 ай бұрын

Гарний стабілізатор для маленького гелікоптера.

@alptravm 2 ай бұрын

kontrol arabirimi olarak kullandığınız komponentin marka ve modelini gibi bilgilerini ve bağlantı sırasında lehimlediğiniz uçların ne olduğu ve nereye bağlandığını da açıklasanız güzel bir eğitim olurdu lakin bu şekilde sizin kişisel şovunuz gibi duruyor. güzel bir kanalınız var öğrenci gençler ve elektronik meraklıları için daha eğitici olmasını dilerim.

@p.h.9907 2 ай бұрын

Intêressant - Ou trouve-t-on le circuit regulateur de vitesse ?

@josip.harasic 7 күн бұрын

1:34 Miért vannak az ujjlenyomatok az alsó lemezen a frissen kinyitott HDD-n??

@edylaine3024 2 ай бұрын

como eu posso saber a quantidade de alimentação do motor do HD?

@hasantamer9199 4 ай бұрын

süper

@gamecuber6 3 ай бұрын

to the the people who are actually planning to do this: PLEASE, if the hard disk you are gonna be using for this can still store data correctly and has no issue you are better off using it as a backup drive, but if it doesn't work (for example it clicks and doesnt get recognized by the computer), then this project is an awesome idea!

@pusaraaksara8658 10 күн бұрын

rpm default hdd nya aja jauh dibawah jet fan gan.

@yorchesece1388 7 күн бұрын

El aspa de un ventilador de CPU solo extrae aire de enfriamiento o disipscion de calor pero no genera sustentación. Hacer un aspa de sustentación es mejor hacerlo manualmente así uno mismo puede modificar el ángulo de las aspas. Se pueden ver videos en KZfaq sobre como hacer una unidad de aspas para turbina aérea. Con simples trozos de metal (de los que se emplean en la fabricación de tuberías para conducir el aire fresco de los aparatos de climatizacion casera o empresarial son buenos materiales), Este tipo de metal es fácilmente moldeable con los dedos o un alicate, fácil de cortar, ligero y duradero. Hacer aspas para construir un motor de elevación para un dron es buena recomendación. No se recomienda usar lámina de latas de refresco ya que estas son demasiado flexibles y que sometidas a un intenso flujo de aire y revoluciones del motor no van a cumplir nuestras con nuestras espectativas de sustentación o elevación para construir un dron eficiente y seguro.

@nuronprinter 3 ай бұрын

What's ESC driver?

@jesusrubio4948 Ай бұрын

Me gustaría saber qué es el aparato que le suelda y cómo conseguirlo me gustaría saber cómo se llaman los componentes para poder comprarlo por separado y montarlo gracias

@KKAltair 7 күн бұрын

This must have been a veeery old HD. Currently they have motors built into the case.

@craftstuff-policecorruption. Ай бұрын

With an average speed of 10000 to 15000 rpm this would probably make a jolly good drone propellor engine.

@maulanariyadi712 4 ай бұрын

Kreatif gan 💪👍🥰🎉🎉

@machmichmuch 3 ай бұрын

Interesting how you remove every single screw

@vipulgujrati8553 4 ай бұрын

Hello sir apne project banake dikhaya uska circuit diagram chahiye AP de sakte hai pls.help me

@samizgaibi5474 Ай бұрын

ماهي الدارة التي تشبك مع المحرك وتتحكم فيه انا جربت 12v DC ولم تعمل كما يجب

@a-modevgis1055 3 ай бұрын

We we have 3 cable to feed the motor ?

@swyntopia 3 ай бұрын

It´s a brushless motor, so 3 phases. You need a controller for brushless motors !

@alexandruvoicu923 2 ай бұрын

😂😂😂You really don't understand that this idea has been used for many years, what a great trick to use all that you find in old technologies or hardware that are to be scrapped!

@elramo1 Ай бұрын

He only care about the views 🤷