Upgrade your Creality K1 or K1 Max with Micro-Swiss FlowTech Hotend

Рет қаралды 43,340

8 ай бұрын

Chuck shows you how to install a Micro-Swiss FlowTech HotEnd upgrade for your Creality K1 or K1 Max. He explains the differences between the original Creality version that can leak and the Flowtech version. Then he runs some prints to see how well it works. Check it out on this week's Filament Friday.
Video Sponsored by: store.micro-swiss.com/
Micro-Swiss FlowTech Hotend:
store.micro-swiss.com/collect...
From Matterhackers: shorturl.at/XGJGv
Nozzle Removal Tool:
Palm Ratchet with Rubber Grip: amzn.to/3qPs3pB
7mm Socket: amzn.to/3SQ1I9d
Buy Direct From Creality:
K1 Max: shrsl.com/4avrb
K1: shrsl.com/4avrc
Ender 3 V3 SE: shrsl.com/4avrd
Ender 2 Pro ($99): shrsl.com/4avrg
K1 Max Side Spool Holder:
thangs.com/file/948987
Filament Friday Tool Kit:
amzn.to/2MOR00X
Buy - Filament Friday E-Leveler 2:
amzn.to/3qUl80A
(Original version: amzn.to/3qEr2mw)
How to Use the E-Leveler 2: www.chepclub.com/e-leveler2.html
********* $3 - Ender Style Cura Profiles Download Links: *******
Latest V5.x Profiles: rb.gy/5k981c
TPU Profiles: shorturl.at/V08bk
PETG Profiles: shorturl.at/RLEfI
(Free to Patreon Members)
**** Support the Channel *****************
Patreon: / elproducts
Thangs: than.gs/u/240257
Direct Via Paypal: www.paypal.me/elproducts
Shop at MatterHackers.com and automatically donate at no cost to you: bit.ly/1Ugcijp
***** Tools *****
T - Handle Allen Wrench Set: amzn.to/3MBBv8i
Nozzle Removal Tool:
Palm Ratchet: amzn.to/3u6ncm7
Premium Version with Rubber Grip: amzn.to/3qPs3pB
1/4'' Socket: amzn.to/2OjdHdg
***** Popular Prints:
CHEP Cube Test Print: thangs.com/file/21739
CHEP PTFE Cutter Tool: thangs.com/file/23507
CHEP Pawn: thangs.com/file/29643
Direct Support through PayPal donation:
www.paypal.me/elproducts
Buy thru this link to Slice Engineering for the Best Hot Ends and get 5% off your purchase:
www.sliceengineering.com/chep
************************************
***Creality Ender 3 Parts/Upgrades ****
Ender 3 Glass Bed:
Amazon: amzn.to/3tYea7m
Replacement Nozzles for CR10/Ender 3:
amzn.to/2m39K1y
X-Axis Tensioner
amzn.to/38BKbYP
Y-Axis Tensioner
amzn.to/2PhOdhi
Chuck's Favorite EZR Extruder:
bit.ly/2rlKCpp
Creality 8-bit Silent Stepper Board: amzn.to/2YPM0Nh
Cap Tubes & Couplings: amzn.to/2Vf8BCf
CR10/Creality Ender 3 Nozzles: amzn.to/2m39K1y
CR10/Ender3 Silicon Heater Block Cover: amzn.to/3sfDG7s
Solder Sleeve Kit: amzn.to/2Pqqngm
Creality Ender 3 Fan Set (24v): amzn.to/38u9aOl
CR-10 Fan Set (12v): amzn.to/2PrcCxK
T-Nuts Kit: amzn.to/2LsQZg8
Screw Kit: amzn.to/2Va8uGK
Temperature Meter Used in Videos: amzn.to/2JpUJOC
Screwdriver set used in Videos: amzn.to/2PbWocM
Creality Ender 3 Upgrade Package (Extruder, Silent Board & Capricorn Tubing): bit.ly/2MNvmcs
**** Support the Channel *****************
EBAY USA: ebay.to/1wtxfiU
EBAY UK: ebay.eu/2qdC5iy
EBAY Canada: bit.ly/2qdGRwh
Note:
As an Amazon Associate, I earn from qualifying purchases.
****************************************************
Filament Friday Sticker:
Send Self Addressed Stamped Envelope to:
Electronic Products
PO Box 251
Milford, MI 48381
****************************************************
Chuck's Arduino Book:
amzn.to/3tA31JP
Intro animation by Pablo Licari based on Filament Friday Logo by Brian Carter.

Пікірлер: 129

@jaaxxone 4 күн бұрын

One of my favorite things on KZfaq is hearing someone say "Never pull by the wires" while actually holding the wires. LOL We are ALL guilty from time to time!

@Walt1119 8 ай бұрын

Another great video showing lots of detail and great expaination! Just got my K1 Max today, wow what a nice machine! It came w the new “red” hot end installed plus an extra.

@Kittzz 8 ай бұрын

I just did this upgrade on Wednesday. Working good so far.

@Badbunz84 7 ай бұрын

What a great moment today. I was lucky enough to run into to Chuck in the wild. Such a wonderful conversation about printers and filaments and help another person buy a nee printer. Keep up the amazing work.

@FilamentFriday 7 ай бұрын

It was great to meet you too.

@bryanfoster362 7 ай бұрын

Just did this upgrade today, following your video. Getting that braided connector back on was a PITA especially with my bad eyes and fat fingers, but persistence paid off! Thanks Chuck! 😁👍🏼

@Losvespaderos Ай бұрын

I just followed your install and managed to get the fault on the new to me K1Max that someone gave me fixed. Thanks for the great direct install video.

@acacioaguiar6547 5 ай бұрын

Hi chep. I have a tip for removing silicone glue. Apply a little isopropyl alcohol around the glue, wait about 5 seconds and the glue will come off very easily.

@reasonablebeing5392 8 ай бұрын

Great details on the Micro-Swiss FlowTech and installation. I was wondering what the advantages would be and I am impressed. Great to see third-party products being developed for the K1 and MAX. Glad Creality has an open architecture to enable this.

@MitchCrane 8 ай бұрын

I installed a Revo on my Ender, and I love the peace of mind of not worrying about hotend leak disasters. The price for this upgrade seems well worth it to me, so long as nozzles are readily available and reasonably priced.

@OsoBuho 5 ай бұрын

Thanks a lot! Most videos do not show the cables view or even where the screws go. This was amazing!

@yitspaerl7255 8 ай бұрын

Thank you. Right in time ;D I was just thinking of purchasing this hotend.

@mikewood850 7 ай бұрын

I took off the PCB board to easier be able to remove the connectors from the old hot end and to add the ones from the new one. Made it a ton easier and it's only three extra screws. That also made it easy to clean the fan in there while doing it. The FlowTech wires are longer, too. All around a much easier to use / remove / install. Worth the cost I paid on Black Friday. Arrived just in time as I had the same error show up on my K1 as in the beginning of the video and that hot end was only about a month old. Best upgrade I've done my K1 so far.

@af01waco 3 ай бұрын

the rubber band hack is genius.

@elimar2004 4 ай бұрын

Danke für die tolle Beschreibung :-) ich hab ein Hotend für meinen K1 Max vor einer Woche bestellt leider wurde er noch nicht geliefert.

@rexgoodheart3471 7 ай бұрын

So, I bought this Micro Swiss Flow Tech hot end, and I have to say I like it.... the prints so far have been beautiful. BUT.... changing out the hot end that came installed on the printer was a bit of a pain. My particular problem was that the two hot end connectors that need to be removed were GLUED in place and didn't come out easily. After yanking on them for a while with needle-nosed pliers they finally loosened, but in the process the wire leads inside those receptacles got bent. Thankfully I noticed all that before I tried to plug in the Flow Tech.... if I had tried to plug in the Flow Tech with those bent connectors I would not have made proper contact and I probably would not have known later what went wrong. I actually had to turn the printer on its side to make those delicate fixes... which turned out to be a wise step because the rest of the installation process was a lot easier without having to stoop down while bending your neck and working upwards. My arms couldn't take it!

@mrdivo5275 8 ай бұрын

Hey, will you be making K1 and K1 max profiles for creality print slicer? It always helps out so much when you make a profile

@johnalloway4335 6 ай бұрын

Great instructions dude... 🙂 This will help, (I'm disabled and need that extra something something) to get a clear visual and hands on access to the underside of the hot end task. Turn the KI Max upside down on the work bench. Have a sheep skin of beach towel as a bench cover to rest the inverted printer on. Makes this task a pleasant one.... (not so easy with the smaller K1 without masking taping a square roasting tray onto the top of the printer first... haha. been there, done that!)

@ptmoy1 8 ай бұрын

The FlowTech Hotend requires a specialized nozzle, but Micro Swiss only sells a copper-plated version (the same one included with their Hot End). It's supposed to be wear-resistant. I wonder how fast it'll wear out when printing carbon fiber and other more abrasive filaments.

@tivednagol9127 Ай бұрын

Is wood an abrasive?

@nightstryke 8 ай бұрын

A lot of people seem to be upgrading the K1 to the Micro-Swiss FlowTech.

@steveveritas8399 7 ай бұрын

Thank you! I will test this hotend. I hope, they bring us also a hardend nozzle soon?!

@Xenoprophet 6 ай бұрын

They have one actually it's brass with a zircon something metal tip with a non stick coating, it's supposed to last really long but i dunno

@nicholasbackus492 8 ай бұрын

I'm not really a fan of having another standard of nozzle. what manufacturers are going to make compatible nozzles for this? when will we get the Diamondback version? a CHT version? who knows. I also recognize that this is probably a marked upgrade compared to stock. Definitely use what works best for you.

@ronm6585 8 ай бұрын

Thank you. 👍🏻

@boitmecklyn4995 3 ай бұрын

I wasn't sure which K1 Max I had so I had a look at the spare hot end that it came with and I confirmed it was the v1 hot end. I did have a bit of a scare when it wasn't detecting a sensor but it was simply not connected. Other than that it is working great.

@noobt4eguns 8 ай бұрын

Nice video again 👍🏻

@youtubecontrols 8 ай бұрын

It’s barely a video it’s a slideshow with commendation that’s barely different than the included instructions lol The photos might as well be the same too barely any detail was shown

@TFT-bp8zk 8 ай бұрын

@@youtubecontrols Try to be more of a jerk next time, I really feel like you didn't leave it all on the field and give it your all. Oh, yeah and "commendation"? I think you mean "commentary", you illiterate dewsh.

@Dronebertios_World 8 ай бұрын

plenty of details to install the hotend @@youtubecontrols

@FilamentFriday 8 ай бұрын

@youtubecontrols - Interesting. Wonder your thoughts on Ken Burns award winning Civil War series of videos.

@FranklyPeetoons 8 ай бұрын

@@FilamentFriday Your videos are always useful and pleasantly concise! Ken Burns slide show documentaries, however, are great for provoking unexpected naps

@3DPFactory1 8 ай бұрын

Nice, thank you as always

@corlissmedia2.0 8 ай бұрын

I wish you’d do a detailed guide to how to install root access to the K-1 and K-max. I watched the “Official” Guide, it’s very good, but at the end, while they were using Putty to assign the port, and adding the Mainsail-Camera fix, the guide became confusing. I’m sure you could improve on the Root Access install. That would be a great video!

@unc_matteth 8 ай бұрын

is the creality replacement kit you mentioned at the beginning of the video still available? if so how do you claim?

@thumbtackj 8 ай бұрын

Got mine in two days ago (regular K1). I was actually curious what the process would be for replacing the hot end on one of these so this was super helpful. Any plans to make Cura profiles for these? I’ve just been using the default profiles on Creality Slicer for the few prints I’ve done so far.

@kellersig 8 ай бұрын

ORCASlicer so far good. it in profile

@shirgall 8 ай бұрын

When plugging in the connectors one of the white wires came out of the connector. It didn't have the shrink wrap over it like yours did... :(

@riodave4954 8 ай бұрын

What about nozzles?? Looks like u have to get special nozzles if you ever need to replace... Or it's it a type of harden steel?

@DSPrints_ 8 ай бұрын

Are you developing profiles for the K1?

@thewatcher9778 8 ай бұрын

threaded parts tend to losen as they heat up so its bet to follow the instructions and tourqe the nozzel

@FilamentFriday 8 ай бұрын

It’s such a lot torque it doesn’t matter. And because the design doesn’t need to stay tight to a heat break, it doesn’t have to be super tight. My finger tightening worked great.

@Den-ml7zg 6 ай бұрын

So i did this upgrade and upon restarting the machine i unfortunately got a Key:2092 error. It is thermister related is the only info i van find. Any thoughts on this. Checked in creality print and it is saying the temp is 580c. Well after viewing your video again it turned out i had the cables crossed, lol. Any plans on a .6mm profile?

@VoidGuyVids 3 ай бұрын

isnt there going to be galvanic corrosion between the copper and aluminum?

@3dtechnologies153 8 ай бұрын

You da man!

@raeme105 3 ай бұрын

Hope you can help i changed to this hot end and now i get error key 2111 unknown exception any idea

@ThreeDPrintDesigns 5 ай бұрын

Does this upgrade make printing with tpu more reliable?

@rustyv6274 6 ай бұрын

So after replacing it you’ll have to buy nozzles from microswiss and I can’t upgrade to a diamond nozzle?

@jcn115 7 ай бұрын

Chuck, Have you had problem with the K1s jamming up. I've been using the recommended setting for generic PLA and I believe that my machine suffers from heat creep and the filament is melting way up in the heat break. With the old hot end it would jammed during the first layer of a very large print and after I clear the jam, it will finish the print with no problems. I installed the Microswiss this weekend and all three attempts to print it jammed at different stages of the print, but not on the first layer, it did it once the printer was at full speed.

@FilamentFriday 7 ай бұрын

Check your fan to see if it’s working or possible restricted.

@MCsCreations 8 ай бұрын

Really interesting indeed! Thanks a bunch for the tutorial, Chuck! 😃 Stay safe there with your family! 🖖😊

@jakekammerer 8 ай бұрын

I have had my k1 max now for a week and every day, when I go to print something, the filament will not go in all the way and the gears skip. I have to take the nozzle off and sometimes the extruder and get basically force out the mess inside. So this hot end should eliminate this?

@nathaneberlin 8 ай бұрын

Also struggled with this initially. When I changed my extruder to the newer creaility one I moved the ptfe exit further back in the chain to give it more of a gentle curve into the extruder. Also make sure to "unlock" the extruder before loading filament, and then lock it back before printing

@popalex3187 7 ай бұрын

did you change any settings ? i have stringing and under-extrusion after changing to swiss hotend

@boitmecklyn4995 3 ай бұрын

maybe check your volumetric flow rate for your material in you slicer?

@oldtimeengineer26 4 күн бұрын

I upgraded to that one and had noting but problem clogging and jamming so they are junk in my mind

@R2AUK 8 ай бұрын

👍❤

@annoorkhan4219 8 ай бұрын

Nice , do you worked with 5 axis 3D printer?

@FilamentFriday 8 ай бұрын

Nope.

@jpl3k 8 ай бұрын

Thermal paste is not required or recommended for a new hot end reinstall?

@AlbertoMartinez765 8 ай бұрын

Not for this one model no.

@kigaming2593 8 ай бұрын

Would this work on the CR-10 SE ?

@zk_6312 6 ай бұрын

Good review though it looks like a pain to remove and install.

@howardbealeau 23 күн бұрын

What is the extra hole at the back of the hot end mounting plate for? The replacement hot end I bought only came with the two long screws. I thought I might have lost a smaller screw when I removed the old hot end. There's a threaded hole in the heatsink.

@FilamentFriday 22 күн бұрын

The original design had a set screw in there but that’s no longer used.

@FounderOf4 7 ай бұрын

Mr. Chuck - I know I'd butcher your last name. When you were putting the hotend and connectors back together, I noticed that @ 4:44 , the female side was either partially melted or chewed up from taking the Creality hot end off. Your thoughts? Or did you see any issues?

@abtamis 8 ай бұрын

When I load the 0.28 project file I get a similar print time compared to the 0.20 project files. It also names the profile the same as the 0.20 profile, could you please check the files? Other than that the 0.32 Hyper Fast profile is awesome, just printed a part in 1h 36m instead of 6+ hours Thanks for the awesome profiles! (Using an Ender 3 Max Neo) Edit: The ver3.2 files seem to be fine, ver3.3 is not.

@MasterReptile25 8 ай бұрын

any upgrades to make it quieter? its too loud for me. I have completely stock K1

@AlexanderSmith600 8 ай бұрын

Print at 200mm/s with 50% cooling on all fans, turn off the back fan if you don't need it

@mrtydg 3 күн бұрын

Did you remove one of your videos? I watched a similar video of yours where you compared the Micro Swiss hotend with the stock Creality hotend. On two similar K1's. Where did it go? I can not find it anywhere. 🤔

@FilamentFriday 3 күн бұрын

My latest video: kzfaq.info/get/bejne/pr-iZpWYrcDJYIE.htmlsi=Z-TLNhZNeDRBYoSX

@gabriberta85 7 ай бұрын

hey chep ! what 's your choice between creality k1 and bambu p1s?

@cgwworldministries83 7 ай бұрын

K1. Easy. Bambu printers require bambu slicer and they stream camera and microphone data to CCP in China. Creepy stuff. There's no need for a mic on a 3d printer. Just get the k1, 379 at micro center or 449 online.

@FilamentFriday 7 ай бұрын

I prefer the open source K1 vs closed Electronics/Firmware of P1S. But buy what works for you. They both work well. My favorite is K1 Max larger size bed. Microcenter has them for $699. Same price as P1S.

@gabriberta85 7 ай бұрын

@@FilamentFriday i hope that is more reliable than ender3...bambu has the ams and creality have nothing.. is a nice feature

@gabriberta85 7 ай бұрын

@@cgwworldministries83 is simple to cover camera ... but you can disable camera and microphone

@plane1994 8 ай бұрын

you have the old type extruder

@FilamentFriday 8 ай бұрын

Why do you say that? What do you see?

@plane1994 8 ай бұрын

@@FilamentFriday newest extruder has a spring inside and white bowden tube conector I think you have v2 not v3 i have 4 of the k1 max

@user-ie8ru6fg2n 6 ай бұрын

Hi, Can the Micro-swiss Flow Tech Hotend also be used on the Ender V3 KE?

@Murgoh 6 ай бұрын

I'm interested in this too, is it the same hotend?

@ropes83 5 ай бұрын

they have a ender 3 ke heat break. the difference is that the guide doest have a lip and the screws are shorter. i am getting a the K1 version for my ke because i can't get the ke one in australia (can order it from the states but will take a month to get here and my hot end is broken )@@Murgoh

@Lon1001 4 ай бұрын

@@ropes83 Did you end up doing this upgrade, and if so how did the install go? And how are the results?

@ropes83 4 ай бұрын

@@Lon1001 I installed the k1 hot end on the KE. I had to sand off the brim on the throat and use the old screws from the previous hot end. It solved all my problems. The nozzles are good and I had a big problem with the ceramic on the standard one braking. There is a metal cover on the micro Swiss so that’s not a problem. The cold change nozzle works when so easy to take off and on. It’s definitely worth it.

@Lon1001 4 ай бұрын

@@ropes83 thanks for the reply, it's good info to know, I ordered the OEM hotend for my KE but it was hard to find one in stock so was considering upgrading to the flowtech but again can only get them in Canada for the K1 configuration. I wasn't sure if the wires would be long enough, plus my 2 little assembly screws are stripped out and I am hoping the creality hotend includes new ones. If this one gives me trouble again I'll be finally doing the microswiss upgrade on it.

@cgwworldministries83 7 ай бұрын

My k1 extruder came with metal gearing. The one thing I learned early on is the k1's hotend is actually perfect. I have 4 k1s and a mk4 and 4 mk3s all going in my fleet. I tried upgrading to this hotend and at best I saw no improvements. It clogged about 60 or so hours in, slapped the original creality one back in place and just ordered replacements for backups. The microswiss was an upgrade for the ender 3, 5, and 6 but it's a downgrade on the k1 and newer ender 3v3.

@daveferraz6183 Ай бұрын

what is the maximum temperature of this hotend?

@TechMaestro01 Ай бұрын

300

@fliplmb 8 ай бұрын

Possibly stupid question... Creality says to remove the lid when printing PLA to prevent clogs. The design of the Micro Swiss should help prevent clogs. So could we leave the lid on permanently? 🤷‍♂

@FilamentFriday 8 ай бұрын

I leave it on without any issues so far.

@fliplmb 8 ай бұрын

@@FilamentFriday is that with the stock hot end or the micro swiss?

@AlbertoMartinez765 8 ай бұрын

The Lid thing was because sometimes the bowden tube would bend at a weird angle when it went to the far front on the left corner and cause problems feeding the filament I removed the last plastic clip holding it to the chain and solved that issue.

@fliplmb 8 ай бұрын

@@AlbertoMartinez765 the reason I ask is because keeping the lid open makes the carbon filter somewhat useless

@Ridor1 7 ай бұрын

I printed a riser with vents that can be closed for my k1 max. There is plenty of clearance for the bowden tube, and I leave the vents open for PLA and PETG, and closed for ABS.

@victorx4648 21 күн бұрын

Pro tip: It's much easier to do that when the printer is upside down.

@reallyanti 7 ай бұрын

If they made a Neptune 4 Max hotend it would be the perfect solution. I love my Max but the only problem with it is the hotend. I've already had Elegoo replace it twice for free because it's badly designed and creates a blob of death that catastrophically destroys the wiring.

@ZorinInc 8 ай бұрын

If it's not compatible with a Diamondback nozzle, it's a deal-breaker for me. 😪

@CL-gq3no 7 ай бұрын

Same.

@That_Darn_Guy 6 ай бұрын

I prefer it when someone flat out says the video was paid for by the company... Honestly can't trust anything he says it all may be true but it isn't reliable because of where the money is coming from.

@lonnieo4676 7 ай бұрын

i guess yours doesn't have a lidar...

@dorygorell9415 4 ай бұрын

It does not fit in the new K1 max. The copper thermal adapter is too big. It does not fit. Frustrating.

@dorygorell9415 4 ай бұрын

Also there is no screw on the back of the cooling block anymore. Ugh

@johnandrews9246 4 ай бұрын

I ordered creality's official kit and found the same issue.

@bern1e74 4 ай бұрын

Fits mine no issue and I definitely have the grub screw at the back. Bought the printer 3 weeks ago.

@Nighthawk994 3 ай бұрын

As far as i know, there are two versions of Creality heatspreaders and micro swiss offers also two different hotends matching the creality heatspreader versions.

@Twelvelight45 13 күн бұрын

Why would you exchange this? Lock yourself at buying nozzles from one manufactor.

@jonlyons3601 8 ай бұрын

So glad I bought a bambu lab, need none off this stuff.

@FilamentFriday 8 ай бұрын

Probably paid a lot more too.

@stew675 8 ай бұрын

BL printer nozzles are crimped into the hotends and sold as a complete package. Over on Reddit people talk about needing to buy 5 at once to ensure they have enough spare nozzles/hotends because of semi-frequent nozzle clogs that they're unable to clear. Are you seriously celebrating being locked into an ecosystem with no aftermarket and minimally user-serviceable parts?

@jonlyons3601 8 ай бұрын

@@FilamentFriday For sure! But after years of "tinkering" with enders it's pretty awesome to just hit print on a Bambu lab and it prints. No more crazy profiles, no workarounds, no buying 3d party nozzles to fix something that should work. :) Once you get an AMS and starting printing multicolor and multimaterial you can never go back to old school 3d printing. Wait till you try printing support interfaces with PETG while printing PLA..

@3D_Printing 8 ай бұрын

Creality selling poor quality 3D Printers Spool trapped on the back ,etc Filament Tube scarting the top lid, etc

@colincampbell3679 8 ай бұрын

Does not matter if the hot end system is better one if the cost is above what most users can afford? The Printer even now with all the price drops is still a premium pricey printer which is above most users budget. So expecting them to then pay out double the already pricey hot end cost for a fancy high end higher cost hot end replacement is too much. Some better off users can't seem to understand why most of the lower paid hobby users in 3D printing can't just go out and buy this or that fancy very pricey part! And I am sure like allot of users I like others get annoyed by the better off lot telling us "oh but that part is only $$$$ so why not but that?" There is a two tier of users in any hobby, there is the I can buy anything and upgrade it without caring about prices! And the rest who not so lucky and often have to stick to a low amount of spare funds and get the lower end in the hobby and the parts. And has to save up for stuff. But still we hear fro those lucky to spend big, that we all should just get it because it is better! I work a very hard job and pay for all my bills and have a low wage. I have to save up a long time to buy any 3D printer or upgrade. and it does for me like others, get up nose how the well off lot with the money to buy over $1500 or more 3D printers still even now berate us online for not getting what they see as good high end stuff?

@tonsoffun49 8 ай бұрын

No one is saying you have to buy it. Just move along.

@FilamentFriday 8 ай бұрын

After what I’ve seen people spend to upgrade their $200 Ender 3, a K1 on sale for under $400 is actually a better deal.

@seanami8701 8 ай бұрын

@@FilamentFriday just replacing the nozzle on some hot end that doesn't leak, versus having to replace a whole hot end that does a bunch of times will pay for itself over time