Very very good video B. I love the fact that you show every step and explain why you are doing it. This helps everyone and keeps people engaged and educated. Last thing we need are people getting frustrated and quit letting the boats collect dust in a closet somewhere.

Always looking forward to a new and informative video, what a great job you’re doing. Please keep the vids coming.

Great Video Big B. It such a big help to us guys just starting out. Im going to take my boats out this coming week. its been a while.

The main reason i watched this was for the servo upgrade and you have a link for everthing else except the servo specs!

Nice video B , like the way you did the shaft for when we can't find one we make one very nice bg4l!!!!

I love watching your videos, very informative.

Great info

Nice vid big b , 👍👍

I love your videos Great info all the time. I’m just curious though how come you never run any of your boats with water pumps? I live in AZ and I have a Spartan and Ul19 and have duel water pumps in both and never have heat issues!!

Loved this video BIG B, very informative with a different way of doing it (that’s y I love your channel better than others) sometimes peps may have different resources to work with at the time. IN MY OPINION ALSO, THE PERSON THAT KEEPS PUTTING “for 18 and over” on your vids, needs to grow some. Have “they” not watched what “peoples “ are trying to push on children in schools and the rest of society here in the USA. Shame on them

Hey big B I have a v2 I geased my flex cable and when I ran the boat it did great but all of a sudden the flex cable came loose in a couple of was still tight so I took the coupler off off the motor shaft and I looked at it and I took it apart and it had grease in it I cleaned the grease out real good I used some degreaser to clean at out I had to get in the pond to get my boat I think I'm going to get an invest in a tugboat too

I threaded my steering rod connector in to the servo horn and it works good. Didn't have to grind or drill.

Nice video. I really like those Y fittings in your cooling system. Where can I find those? Thanks bud.

Hi Man, I don't know your name. My name is Michele, I'm writing to you from Italy, I love all your videos and I've been a fan of RC Boats for more than 20 years. I have a Sonicwake V 2 that I've been using for several months. sea ​​water with all the precautions you can imagine... I have never had any problems until now. Having had the problem that the transmission hose slipped inside the coupler, after having noticed that despite tightening to the end the coupler nuts, the whip kept slipping. (there is no grease in the coupler....) So I changed the whip, the coupler and the Teflon tube but I still have the same slippage even with the new coupler obviously original proboat for the sonicwake v2! What I notice is that the new coupler also reaches the end of its stroke by tightening completely against the nut that attaches to the motor axis, while, if I remember correctly, it can also be seen in the your video, the coupler shouldn't tighten completely... I can't understand where the problem is. It all started because at sea, as you can understand, there are waves and therefore the boat bounces with the propeller coming out often out of the water....I know this ruins the transmission, but I still put in new parts... that is, new coupler, hose and Teflon tube! Do you have any advice for me? Is there a better coupler than that one? original? If so, where could I buy it from? Thanks Man!!

Great video bro. Solid upgrades. I recently blew out the stuffing tube on the veles and toasted the flex shaft. What would you recommend I replace it with?

good vid but. why not just do your last step first and skip all the other bologna.. thanks with all your help on all your other video's . very informative.. cheers.

Where are the new cooling lines from? Or what ID/OD are they? Great video love the boat videos you do

Who has the best replacement collet or should I just use proboat sonicwake collet till fails

Hi what kind of charger should I use and can I run this in salt water

when it comes to the drive dog position that is.

Hey Big B would like to see you run your 160amp Esc from the Black jack 42 cat into the sonicwake v2

Noticed octura x642 is shorter than stock tonight. Wanted to try it on my dads v1 and didnt have a spacer. Ran out of threads. Tomorrow will be first time with not a stock prop!

Curious after doin a bunch of reading...ever tried loctite retaining compounds to do the shafts? 648 to hold a prop shaft to flex cable and 603 for the collet end? Committed to the stealthwake cable/strut upgrade! Vid coming soon 😁

i sent u a messege last night about battery charging i have xt90 connectors how do u clean them no but did ,my 3s and charged and i have a old 2s that is charging it r these new 2s that wont charge

One of your vidios you were using some kind of flex shaft tool to work on motors and mounts, where did you find that tool to use,I cant find one anywhere, havent tried harbor freight yet, 😅

Stuffing tube Lining? Does this upgrade remove the need for the stuffing tube inner lining? Is that the stock colett? and is that the stock size drive dog? If not, where can I find them? Appreciate your vidz.

Have you tried silver solder?

Where did you get the rod holder on the servo arm

Is it normal after upgrading servo that it is really sensitive steering at high speed, or is there an adjustment

Just got my coupler from ose part #81518 looks like it will be the ticket to fly will review after I install and run. Peace by the way the sonic wake and impulse 32 seem to be the same I had the upgraded cable from ose for my impulse 32 however it seemed to long so iswaped the sonic wake it was perfect install the other on the sonic and udjused the tfl stinger and bam d o n peace brother

Any idea what the stock SonicWake prop is? 4219? Also someone send this man an Impulse32 for prop testing!!

LEARN SOMTHING NEW EVERY DAY

Hey Big B! What did you use to replace that stupid stuffing tube grommet on the sonicwake v2? Mine tube keeps rotating with the shaft ever so slightly causing stuffing tube heat and that grommet is expanding because of it? Thanks

What makes zipkits cable upgrade over flex cable from proboat?

whats that red thing you have where the stuffing tube goes?

I can't figure out my steering after updating new servo. Something isn't adding up. Can you help ?

I don't even care,As long as I can have my limo and my orange hair.😆

Can u pls send me links to where to get the Servo & the other parts thx 🤷‍♂️

Help me please.. does anyone know why my brand new one has a tight drive cable and at low throttle imput it won’t spin and it overheated first 5 min