Great video Isaac! Appreciate you sharing and making these comprehensive.

Great video explaining engagement on freewheels. Currently in the Phoenix area and planning on hitting up some bike shops. Hopefully some of the local bike shops in the area will have some big wheel bikes to check out. Thanks for the video!

Thanks to you I was finally able to remove the freewheel. I have the tool but never crossed my mind to as a bolt on back side of tool to keep it from slipping off. Thanks a lot man.

Thanks mate, great insight in to that freewheel. As soon as they’re back in stock, I’m ordering one. Cheers

Awesome sound and engagement, I’m sold! The chain tension looks a bit tight however! I was taught the goal with the chain tension on a freewheel is to have just enough chain tension that when you coast or take your feet off the pedals you don’t want your cranks to keep turning (ghost pedaling) so that when you do any tricks the pedals stay in the same position that you left them. Maybe that’s no longer an issue with these better new freewheels sprockets, just putting that out there.

Probably the only Jedi who noticed the stormtrooper chest piece. As always the vids are awesome and well done. Sounds killer like a faster snake now. Adding one to Jackie’s Ripper .. thanks Brother for doing what you do

No doubt this is one of the best free wheels on the market especially for the price, great engagement and sound. LJ and Mattie did a great job. Also great video as always 👍 even though I haven’t finished 😂

I always use the Shimano MX30 16t. Super smooth and quiet. They coast for days.like my bikes quiet and stealth. Rip and Dip. Keep the videos coming. Awesome stuff.

I love how you always get into details, good video!

Lifetime Bayarea guy here and ex Club Homeboy member (I remember the newsletters). Dynofish, Vision Eyes, Ron Wilkerson, Eddie Fiola (I met Matt Hoffman when he like 14 and rode the Haro tours). I've always been a 24" rider, love 'em. In the early 70's (I'm 60 now) our only upgrade options were on Schwinn Stingrays. We'd put a rear tire on the front, spread out the bars and get someone to weld on a crossbar and homemade frame brackets or you could heat up the gooseneck and spread it open to slip in some motocross bars. Then came the Littlejohn Murphy with Motomags. In the 80's I stepped up to the 24s with a Race Inc. then a fully loaded Boss. Both with blue Tuff Wheels. I did the single father thing for 20 years and a couple of years ago I wanted to get back into cruising the half mile wheelies I loved so much. I looked at all the new stuff. Cult, Sunday, We The People, etc. I was surfing Craigslist and found a 2004 Redline Flight 24" Bubba Harris for $200. It was never ridden, still had the tire mold nub strings on original tires. It's all sealed bearings and I was surprised to find the Euro BB had 4 bearings. I'm upgrading it now (when do you ever stop?).I put on tuffs, Powerblock 2.10s, Stolen 4 piece bars, old style MX front brake (old guys like brakes) etc. I tried to get a Profile, White, Hornet freewheel but no one has anything but a Shimano, ACS or the cheap Lian Cheng stuff. I'll checkout the ROS availability. Anyway, from one old guy to the next, if you have a front brake and you're cruising a long wheelie, tap it and stop the front wheel spin. It looks a bit more cool. It's like getting extra pepperoni.

That red & gold really pops 💗

I just recently upgraded both my Big Rippers from the stock 15t to now a 18t freewheel after seeing your other video about what upgreade options are best to do. 👍👍 I absolutely love it and its a much nicer ride and the Profile Elite freewheel just sounds so sexy! I ride down here in Tucson,AZ and you're not joking about our weather at all!! We do a Major Local ride out 130+ riders every Tuesday night if you're ever down south

Love the old skool vibe videos

Everyone needs to subscribe to this channel Isaac has answered every question I’ve asked him in record time...Much appreciated

I just bought a big ripper. They are so hard to find right now. Looking forward to upgrades.

Hey Isaac. Thanks for the content. Really appreciate it. I missed you a couple of weeks ago when you came to San Diego. Hopefully get the chance to meet you someday take care

Every rider should have a bike work stand. I got a park tool stand for xmas back on 97

thank you so much, just installed a ros sprocket and ros freewheel on my big ripper , from stock 36/16 to ros 33/16 it is pretty loud and feels very nice and easier to pedal with the smaller sprocket as well, just 1 problem and that is ghost pedaling but a chain tensioner should do the job, the only tool i had to buy aside the ones i already had to remove the wheels were the FR6 freewheel remover, the ROS freewheel also comes with grease applied to it

Finally got my first se bike Saturday . A new SE OM flyer blue and gold . After searching for weeks. I’m 42 5’9 230lbs. Don’t know if any of that matters lol. What do you suggest for A free wheel upgrade size.

HI Isaac. Hope all is well. Really enjoy your vids. It's inspired me to get back into BMX again. I'm in my 40's and just acquired a Stealth Blocks Flyer. I'd like to upgrade the stock 37t sprocket and 17t freewheel to an easier feel. Looking at the ROS freewheel you showcased. Do you know if it fits the Block flyer? I've tried searching for the stock flywheel threading/size with not luck. I'm looking to get either a 33T sprocket with a 16T freewheel or a 30T sproc/15T freewheel. I'm assuming a 30T with the stock 17t fw will have me spinning a bit? Any recommendations Many thanks

Great video! Going to use this! I have been missing from this activity for 30 years,,, just have a question, I just purchased a 29 inch throne.seems like a strong bike, I just forgot the sounds a bike makes,,, when I'm pedaling every 2 or 3 cranks she makes a light pop in the chain....is this all because it's new or something faulty. .....thanks man love your wheelie tutorials.

Awesome vids and excellent info and tips Issac. Really appreciate the vids and info you bring. What was the gear set set up you went with on the Camo SE/Cg Big Flyer ? And why did you choose that one ? If I remember correctly I believe you went with the 33t.

Sounds amazing, need a 13T

Hi Isaac i have a 2021 big flyer with 36t sprocket and 16t stock freewheel. I can lift the front wheel up but i found it very hard especially for the sitting down wheelie. In this moment i find only a 19t sturmey archer freewheel....is it a good option in yout opinion to make the bike easier to wheelie? another question what pressure do you reccomend for the Bozack tires... 30 psi front and rear is ok? thanks

Have a 2021 big ripper . What specific tool or socket do I need to remove the stock freewheel ? Thanks

Dang that's crispy 👌

Isaac Awesome vids. I have a question. How do I know which or how, to fit a profile elite freewheel on my SE OM Duro? Every shop I ask seemed to be concerned where and how I spend my money instead of helping me.

great video

Sick hair bro..........motion sickness alert @ 15:21 🤮🤮........Another awesome video keep them coming!!!!

Thanks once again I received my ride out supply freewheel and the One extra tooth didn’t make much difference in my stock chain . It worked just like you said also it was 1000 times easier to remove the freewheel by putting that nut back on the axle thanks for the video I do have a question it says my stock chain is a kmc s1 but I can’t find a size or thickness ? what chain do you recommend .. my chain worked perfect like you said I just think I want a white chain now... Thanks again for the great videos

When they get super tight, but the tool in a vise, use the tire as grip/leverage

Thank you for the hack and video.

I didn’t see a link that looked different so I just used the chain tool and picked one link I got it off and got the new white chain on... BUT Why does KMC sell a white chain but the master link is silver it looks stupid.. do you think it would be OK to clean that one link pretty good and hit it with a little white Rustoleum paint

Do you happen to know if you can service the ROS freewheel like you can with the White or Profile? Sadly not much info out there on the ROS (yet)…have a Big Ripper from 14 that needs a freewheel to do some good wheelies

great video, thank you

Thanks for the video, going ros.

Love the video got a 2021 bigg ripper front sprocket is 36 back free wheel is 16 I'm stock on both hornet and ros. Can you guide me in the right direction as far as what brand and size new to the bike world thanks. P.s like to be able to pop wheelies easy.

Thought Seth Rogan went on to discover biking there for a minute

Hey boss great video!!! I need your help. Do you know if I could fits this freewheel on a 94gt performer fan mag?? If not do you recommend another freewheel that I can screw right on that’s loud??? Thanks in advance

what is the itemized list of tools used in this video? also what size sprocket are you running on this particular bike?

Would the 15t fit a big flyer? Would I be able to just swap them right out of the box?

Hey brother thank you for the video. Do you know if that freewheel will fit on my stock 2021 Haro Pistol 29? I don't know what to look at on my bike to figure out if it's compatible. I'm basically new and don't know what to do :) Thanks again.

Hey man I have 29er GT Performer Im thinking about switching to white industries free wheel and I wanted to ask what size to get, what made you get 16T? Thanks for posting

What's the best sprocket gear combo for wheelies on a big ripper. ...(tooth count front/rear), can you add another gear to the other side of the rear hub and just flip your rim to switch it up??

Hey Isaac, what freewheel would you recommend for a big flyer with a 33t sproket. I was thinking 16t

Hello I ordered my new chain this morning when I was looking at my stock chain on my 2021 big flyer it didn’t look like it had a master link but my new KMC chain does should I have looked for a new chain without a master link is one better than the other... it was kind of dark this morning maybe I didn’t see the master link I’ll have to check when I get home from work LOL.Thanks again for all the help and always quick response

hey isaac! i was wondering if you had made a video on upgrading your bottom bracket? let me knoww thanks

Does the ros freewheel still have a lot of engagement even though it has less drag?

Coming to cali for the SEhoedown this weekend?

Question. What rear axle does this bike have?

Hi Issac. I have been doing some research on a Freewheel, the ROS appeals to me. I also like the Box Two design. I watched your abbreviated version of this video as well, both are well done brother. Hope you are keeping cool. Hey, I have a question thought about Hubs now. I have discovered that my Fixed Gear Miche Primato Pista/Pista is set up for a Fixed and Fixed on both sides of a 1.375/24 hub after the shop guy told me I have a Flip Flop Hub... two years later, I discover he Lied. Now, I'm looking at building/buying a new wheelset with Flip Flop Hubs to go with... I need to source out some half decent Hubs, Black, 32 Hole, High Flange with that 1.375/24 thread pattern so I can fit it with a Freewheel, like the one you have. I need some suggestions on what you might recommend, Would appreciate any input. Thanks and take care bud Ride On, Play Safe. 👍

Isaac, do you really feel as though your ride out supply freewheel engages quicker than the factory freewheel? I recently replaced mine with a 17th ride out supply freewheel and it doesn’t seem to engage any quick than the factory SE freewheel. Any thoughts?

Thx for the hack! Old guys rule 💯

What do you recommend for a 2018 sock flyer? I also would Locke a better sprocket. My sons bike is the red white and blue I just put red and blue pedals so looks along with the performance a red chain recommendation would

What aftermarket chain working for the ride out flywheel

Hey isaac! How many teeth do you recommend for a dub ripper?

I’m running a 32:16 right now. Thinking about getting the 15t ros freewheel. Will this make a huge difference?

Recommend a freecoaster for a Om flyer

I love those seat posts. Where can I get one?

Thank you!

Excellent video. Can you help me out I’m trying to find a 14 tooth freewheel for my big ripper. Do you know of anyone that manufactures them or has them? I wanted to run a different gear ratio on the flip flop SE hub for longer faster rides. Any input greatly appreciated!

Hey bud, I’ve got the pk ripper 2020, same as you. I have heard you and others mention that it has a cassette not a free wheel on it, I’m not really understanding what that means, I’d like to make my bike as easy as poss to wheelie, is there a swap over for the rear cassette like a tighter freewheel like the one you just fit up to this bike or it’s not possible/expensive/hard

What's the best 29er bmx on the market? Sunday high c.... cult devotion....gt pro performer/dyno compe....lastly the 27.5 fairdale taj? Im 6ft. And come from dirtbikes for 30 yrs....im addicted to wheelies and want the best big bmx money can buy..... pls any help? Ps. Will the 27.5 taj be too small for me? Or would a 29er be more comfortable?

My big ripper came with 36T x 16T freewheel..if I go up to a 17T freewheel will it make it a tad bit easier to pedal? I don’t want it to be TOO easy I just want it a LITTLE easier ..will a 17t do the trick ?

I have put on my new ride out supply freewheel and the one and only problem I have with it is that it ghost pedals so is there a way to fix it.

It says for a “big ripper” the 15 tooth is needed. You chose the 16 tooth. Does the 16 tooth ride better then the 15? Thanks for all the awesome videos!

Sorry for asking so many questions but do u know where u got the hornet freewheel 17t 1/8

Is it possible to swap my (Red Mag)coaster parts out & put my (Black Mag)freewheel parts.? I don't want to modify the coaster brakes by taking out the brake pads...I would like to swap the guts entirely. 🤔

Is there any performance difference between 15t 16t and the 17t freewheel because on my big ripper I have a stock 15t and I don't know how many teeth I should get when I get the ROS freewheel.

Did your freewheel come with a freewheel tool, or do you need to buy one separately?

What’s with the plastic spoke benders still on the bike?😃

what is your daily driver? i thought was gonna b pk ripper. can u explain how u chose ur daily?

Yo what tool you use to remove the stock freewheel? I bought a couple and they didn’t fit.

You coming up to New York for the everybody’s ride out “. ?

You going to be at the Santa Cruz Rideout in a couple weeks

Hey Isaac great videos! Question for you and maybe ROS can give me some ideas also. I have a 2019 Big Flyer with stock I think ACS freewheel. I am looking for better engagement (stock feels soft) but super quiet like stock. Sorry but just not a fan of the loud clicking freewheels. Again great videos and keep up the great work. @jrozz3

Hello my question is I ordered a ride out supply 17 tooth freewheel my original freewheel on my big flyer was 16 tooth . Do I have to get a bigger chain from adding one tooth on my freewheel.

Hello brotha my Gt pro series came with a 33t sprocket and 16t freewheel. Should I stick with the 16t when upgrading to ROS freewheel

For the hornet freewheel did u get the 3/32 or 1/8

Will a 17t help for wheelies?

I have a new monster quad 20 tooth was thinking about the ROS 17 tooth. What do you recommend?

Where Do I find those tensioners? I have a big ripper I have been looking for something to use on the wheel.

Can you recommend what size free wheel cassette I should run on my new skyway mags 20’i Am clueless I am building a gt dyno father and son project any help much appreciated

Finding a tool to fit the stock freewheel to remove it has been a pain in the ass. Which actual tool fits the Chinese made freewheel? Any help would be awesome!

I wonder if they make one for 30mm hub

I have a 2020 se big ripper I try to use the 4 prongs and it didn't fit. do I need a 2 prongs to remove it... please help ,Gilbert AZ

👍👍👍👍👍

What is the tool you used?

Important question: should I put waterproof grease on the freewheel or install it as is? Thanks for your videos and input man

How many tooth are on my stock big ripper

Hey im a rookie with my Big Ripper, i was riding it today and it lost pressure in pedaling l, like when pedaling forward it freewheeled forward, whats wrong??? do i have to replace my free wheel?? or what or is it a simple fix???

Which freewheel is louder? Great video btw just gained another sub 👍🏼

Any other cool freewheels besides this one? ROS freewheels are sold out.

So what's a better ride the 16 or 17? Or can you tell the difference 🤔

If I want to pedal faster and my big flyer has a 16t free wheel would I get a 17T?

Went for a ride with the kids couple miles downhill to my brothers house pretty much all uphill on the way home turning on my street I heard a pop couldn’t tell where it came from the kids heard it to . .... HOPE it’s not my new ride out supply freewheel I did replace the chain but it was a KMC $13 white chain with a two piece master link have you heard of any problems like this ? It made me start looking at a half link KMC ..pin connection chain.. ... hoping it’s not my freewheel.. any input much appreciated

Questions is that a 29in bike if so can you send me the part # so I can order one for my bike.

My freewheel on my 2018 blocks flyer is stuck what should I do ?

Whats the point of the chain tensioner if you just pull it back with your hand and tighten?

Which freewheel tool is that? FR6 fr6c? Thanks