Upper Control Arms
Рет қаралды 30,942
Күн бұрынWe discuss Upper Control Arms, if you need them or not, and the Ironman 4x4 Pro-Forge arm. Since this is a long video, you can go to the different topics below.
TOPICS:
0:20 Do I need upper control arms? Why?
2:01 If a proper 2 inch lift doesn't need an UCA, when do we need it? How does it help?
05:13 Why do most people not running Ironman 4x4 suspension use UCA?
06:56 Vibration and UCAs? What did you do on your pickup? What is caster?
09:35 Some do it for bling, I need it for strength, is Pro-Forge the answer?
10:15 What is the Pro-Forge advantage?
15:40 Does it increase droop? Improve sag?
17:18 My Navara upper arm hits the shock mount, why? How will Pro-Forge help?
18:36 Do you have Pro-Forge for me?
19:01 What Pro-Forge fits where?
Link to measuring sag here:
• Measuring Sag (downtra...
Click like, subscribe to our channel, and don't forget to click the bell for our new videos!!!
@trevormeek3223 3 жыл бұрын
THANK YOU FOR YOUR HONESTY!
@ironman4x4philippines20 3 жыл бұрын
Thanks
@ulehuleh 2 жыл бұрын
Very knowledgeable and informative video mate
@ironman4x4philippines20 2 жыл бұрын
Thanks!
@mattquebec888 3 жыл бұрын
Mahusay po kaung mag explain and very honest. Kudos to this channel.
@ironman4x4philippines20 3 жыл бұрын
Thanks sir. Technical facts lang tayo sir. Teaching our clients and the public the realities involved in suspension setup. We help anyone whether Ironman 4x4 user or not. :)
@Yyortt 2 жыл бұрын
Thank you so much for this informative series!
@ironman4x4philippines20 2 жыл бұрын
Thanks thanks
@Yyortt 2 жыл бұрын
@@ironman4x4philippines20 who's your dealer/shop in south luzon/cavite?
@ironman4x4philippines20 2 жыл бұрын
@@Yyortt Cavite we have PH4x4, Las Piñas we have Monsterworx. Drop me a pm at FB, Pablo Lu Ascoba or Ironman4x4Philippines so we can guide you better sir.
@amar.mohamed 3 жыл бұрын
Amazing video man!!! Appreciate your honesty!! I wish more manufacturers were honest like yourself
@ironman4x4philippines20 3 жыл бұрын
Thanks. Just doing what is right sir
@angelietubanza272 7 ай бұрын
This is true No product is perfect but transparency and right knowledge is ❤
@getcsv 3 жыл бұрын
Good informative video. Well explained!
@ironman4x4philippines20 3 жыл бұрын
Thanks
@jiaflores1922 2 жыл бұрын
Boss thank you so much. this is very informative. hindi masayang pera namin bossing.
@ironman4x4philippines20 2 жыл бұрын
Thanks sir...
@omdhpg4044 2 жыл бұрын
ordered my IronMan ProForge UCA at StageOne Autoshop Q.C. last Aug 26, 2021 and arrived on Aug 31, 2021 at their Shop and damn, when i came and pick it up, it was a total beautiful masterpiece.....
@ironman4x4philippines20 2 жыл бұрын
Thank you very much. It uses the most highend and accurate manufacturing process, only available to supercars, which is being a forged alloy. It is one of the few UCAs on the market that actually alter caster and camber for lifted trucks. Enjoy it sir!
@SofiandAmber_cooks 3 жыл бұрын
Nice Video! So much info to absorb, LOL
@ironman4x4philippines20 3 жыл бұрын
We can not stop learning... :)
@robertboyd321 3 жыл бұрын
Hey after watching this I purchased a set for my MN Triton which is raised just over 2" (55mm) and the arms sorted out the droop issues I was having with the standard arms. Thanks for your honesty in your description of the product, it was very nice to hear in this sell, sell, sell at all cost age we are living in. But there was one thing I was a little unsure about & that is when you said that rubber bushes are stronger & better than polyurethane bushes. This is true to a point when comparing vibration, noise & ride, but when it comes to flexing the poly bushes are stronger because they are not bonded to pivot shaft sleeves. And this is where all bonded rubber bushes always fail when compared to polyurethane and therefore rubber bushes are not always stronger. Other than for that I agree with everything else you said 100%. So, thanks.
@ironman4x4philippines20 3 жыл бұрын
Thanks so much for the input. Yes the poly is really good as a bearing of sorts, but stiff when it comes to twisting or deforming. That is why we recommend it for leafspring bushes as they do a rotational job. But thanks for the input. We approach this industry as a user/hobbyist and wouldn't want to sell you something you don't really need, as the money can be used for more important stuff.
@DIY_AUTO_PHOTO 3 жыл бұрын
This is a good video ! I am working on my Nissan Xterra.. fixing it and I am planning to do soon'ish.. lift.. hopefully this summer.. and make a video about it... so now I am in the look out for good budget friendly lift kits.. and now just came across this kit... IronMan.. this is something to consider )
@ironman4x4philippines20 3 жыл бұрын
Hi sir. Thanks! Ironman 4x4 has been into suspension in Australia since 1958. The suspension works really well. You in the US?
@DIY_AUTO_PHOTO 3 жыл бұрын
@@ironman4x4philippines20 Yes I am from USA, I am a beginner youtuber and DIY worker on my truck.. so thats why I started to look into lifts as my suspension is pretty old and saggy so its defiantly will need upgrade sometimes this year hopefully
@ironman4x4philippines20 3 жыл бұрын
@@DIY_AUTO_PHOTO thats nice! It is an easy fix with Ironman 4x4. Everything just bolts on!
@DIY_AUTO_PHOTO 3 жыл бұрын
@@ironman4x4philippines20 I would like to get a full suspension replaced... front back.. leaf pack and etc.. thats why I am now looking at different companies and what they can offer
@ironman4x4philippines20 3 жыл бұрын
@@DIY_AUTO_PHOTO yes sir. Drop me a private message on FB, Pablo Lu Ascoba
@marco-mp2qe 3 жыл бұрын
Hi sir, very informative, would like to request the different types of shocks you have
@ironman4x4philippines20 3 жыл бұрын
Okay sir. I will do one on this.
@Kizaru208 2 жыл бұрын
After 40mm lift with 285 tires my steering became sensitive depending on road conditions. It follows uneven roads the proper term is tramlining. It wasnt behaving like that when it was stock. Will the uca solve this?
@johnc5210 4 жыл бұрын
These are a good idea so you can increase your tire dimensions. But one thing I remember from owning my Toyota 4Runner was that if you intended to ford deeper water there is a need to modify the differential breather tube to prevent water going in. Have the later 4X4's resolved this issue?
@ironman4x4philippines20 4 жыл бұрын
No sir John. Most still run the same style diff breathers. Some Jeeps have factory extended breathers to about hood level. What we usually do is install an Ironman 4x4 diff breather kit so you can route your own breather hoses as high as you want.
@johnwrightoverlandingrobotics 11 ай бұрын
Would I need to to do a body mount chop on a GX460 if I use the Ironman Upper Control Arms combined with the Ironman FCPs (for 2.5" lift with 33" Tires)? Right now I have a 2.5" spacer level kit with stock suspension with my 33" tires and I just had to trim a little. I want to get rid of a 1" spacer that I needed to prevent the tires from rubbing the stock UCA at full compression. Ironman UCAs should give me more room from watching your videos, but I am worried that they will push the tires too far back and create a need for a body mount chop. Please advise/comment if you could.
@JJ-po9nb Жыл бұрын
I have a 6” rough country lift. Should / do i need a new UCA ie ironman
@davincigigs7085 Жыл бұрын
Sir am I need to use a UCA? Because my pick up height is 33"
@roneywakit2435 Ай бұрын
Good evening, Sir using Iron man foam cell suspension on Fortuner 2009 zero offset rim. Do i need to change the stock UCA. Salamat
@Films215 Жыл бұрын
Can I order Ironman forged UCA for Ram 1500 2016 4x4? I wish I watched your videos earlier before I bought Bilstein 6112 for my Ram........I'm now concerned if it's better to install a proper UCA to go with it........Will need your advice. Thanks
@paulviron265 3 жыл бұрын
Thanks great vid. I am running 30mm lift on my 2016 MQ triton Bilstien shocks lovells springs and was getting bump steer when hitting bumps on road and off road I had minimal down travel. My local Ironman suggested to go 50mm foam cell pro and but the upper control arm. Do you think this will solve my problem. Thanks.
@ironman4x4philippines20 3 жыл бұрын
The Ironman 4x4 Foam Cell Pro can be lifted up to over 50mm, that is when you need the UCA. I run a lot higher caster on my Hilux with the UCA for 0 bumpsteer. Drop me a message at FB Pablo Lu Ascoba
@toytravelgadgetph63 2 жыл бұрын
Sir question.. i bought my 2022 Ranger FX4 Planning to change may mags and tire stock (18s) to 20s magd and all terrain rugged tire.. do i need to update my suspension and spring? Sorry for the question.. newbie here sa pick up truck.. thank you sir
@KenKnowledge 2 жыл бұрын
This is an excellent video. I am planning to lift my Navara Np300 - 16 with a 2" suspension lift front and back and add bigger wheels and tyres. I usually ride unladen so i am looking for soft springs. Stock springs seems quite Hard. Would i need an upper control arm as well?
@ironman4x4philippines20 2 жыл бұрын
If you go with Foam Cell Pro Long Travel, you will need the ProForge Upper Control arms, to maximize travel. If regular Foam Cells, and you dont push for height, then its not a need.
@KenKnowledge 2 жыл бұрын
@@ironman4x4philippines20 thank you for your input.
@aaronthoj2000 2 жыл бұрын
I have a 04 Toyota Tundra. It has leveling front kit (2.5-3") with a differential drop. I installed 35" tires (35/12.5R18). After cut and trim, no rubbing. I was able to get it aligned with stock UCA and LCA by adjusting the casters. I do notice that the UCA is very close to the springs. Will an aftermarket UCA and LCA will help me at all?
@ironman4x4philippines20 2 жыл бұрын
A UCA will help, but the distance of spring to UCA is caused by the levelling kit, as it essentially lengthened the overall length of the shocks. It will over-extend your axles and all other components. Check this: kzfaq.info/get/bejne/ht5xmZWk1dqZh4U.html
@marvingaviola2216 2 жыл бұрын
Sir, How to achieve 2andhalf or 3inch lift in nissan navara d40 front suspension, currently using Ironman 4x4 2inch lift coil springs. Thank you!
@ironman4x4philippines20 2 жыл бұрын
In front we can do 2.5. Send me a pm on fb, Pablo Lu Ascoba
@panosdamianelis8862 3 жыл бұрын
Nice video! Where can we find them?for my hilux Vigo?
@ironman4x4philippines20 3 жыл бұрын
From Ironman 4x4 Philippines and our authorized dealers. Send me a message on FB sir. Ironman4x4Philippines page.
@mavelikkra 2 жыл бұрын
Hi, any suggestions for 2004 Jeep Grand Cherokee… any suggestions for the lift kit and suspension.
@ironman4x4philippines20 2 жыл бұрын
There is an Ironman 4x4 kit for that. It is the ZJ?
@cortez501 3 жыл бұрын
Sir, my unit is a 2015 Mitsubishi Strada (older 4D456 engine model) I have an existing Lovell coil springs together with an MCC Front Bumper (not sure if the coils were designed for a 2 inch lift though they said it is) and I have an Amada Explorer II adjustable front shocks and also an Amada UCA (they told me that the bushings and ball joints are replaceable too, but not sure if they mean replaceable with the OEM bushings and ball joints, please give a comment if you have any knowledge regarding the replaceability). Anyway, I want to make sure if the IRON MAN PRO FORGED UCA, can accommodate cleanly with ample clearance to spare the Lovell Coil Springs and the Amada Explorer II shocks without rubbing. And my final question is, does IRON MAN PH sell replacement bushings and ball joints for the IRON MAN pro-forged UCA. Thank you. 😊
@ironman4x4philippines20 3 жыл бұрын
I think it can accomodate the Amada shocks and lovells coils, but I cant be so sure. However, judging from the fact that the coils are Lovells (Australian), they were designed to work with the OEM upper arms, so fitment of any upper arm wont be a problem. As for the bushes and balljoints, we have a few in stock, but they are readily available in any auto supply as there is nothing special about them. The secret to the geometry of ProForge is in the arm design, so special extended balljoints are not needed. Most Asian arms use special joints coz they did not alter the geometry of the arm, instead they just created a good looking arm for bling and added special joints, which you could have added to your stocks arms too. Same effect.
@roderickdepolonia1349 7 ай бұрын
Do i need a UCA for a 2 inch trailblazer? I heard because you said the colorado does not fit exact the alignment after a 2 inch lift. Since i think maybe the colorado st trailblazer are the same? Thanks po
@ironman4x4philippines20 7 ай бұрын
I think you would need it. I ran my colorado for a few years without aftermarket UCA but I only had about 1.8° caster instead of 2.5°. It would be best to see if computerized alignment could be done or not.
@medallamellagrosaadventure7148 3 жыл бұрын
My 2017 Nissan Navara EL Calibre 4x2 I just installed tein suspension 265x70x17 mags after that it can’t be allign would it be solved if I put the UCA sir?
@ironman4x4philippines20 3 жыл бұрын
Why cant it be aligned sir? Tein is an unlifted suspension, usually stock height.
@kurttevan 3 жыл бұрын
My car is a chevrolet colorado 2015 so if i lift my pickup i need to also change the uca? Planning on installing am iron man lift kit
@ironman4x4philippines20 3 жыл бұрын
Sir on the Colorado if we get to 2 inches or a little more you will need a UCA. You will know it when alignment is hard on the computer.
@zyrelnagano8953 Жыл бұрын
How about strada sir??its that fits?
@Vorx 4 жыл бұрын
About the advantage, What if I am using Ford Ranger? Can the ball joint/bushing be replaced with Ford OEM?
@ironman4x4philippines20 4 жыл бұрын
Yes it can sir.
@MyGTisxHUNTER07x 2 жыл бұрын
Are the rear coils for Trailblazer 2016 same as MUX'S?
@ironman4x4philippines20 2 жыл бұрын
No sir. The Trailblazer runs a Different rear coil. The inside diameter on the MUX is smaller.
@JAU751 2 жыл бұрын
Hi Sir. Planning to lift my 4x2 dmax with ironman nitrogas kit. Does it need UCA ? Considering i dont use my pick up for offroading but for carrying heavy loads/cargo
@ironman4x4philippines20 2 жыл бұрын
What year model sir?
@JAU751 2 жыл бұрын
@@ironman4x4philippines20 2020 sir
@davidtugang4499 2 жыл бұрын
Sir,im using 265/75/16 tires on my Triton ,lift up 2"..do i need to replace the original upper arm?
@ironman4x4philippines20 2 жыл бұрын
Depends if you can still properly computer align your triton.
@LukaDonchez77 11 ай бұрын
Hi sir. Bale wla po ba kinilaman ang. Upper arm sa ride quality or better ride comfort?
@ironman4x4philippines20 11 ай бұрын
If di naman sagad ang existing arm po then wala po.
@bonbuzkie 3 жыл бұрын
Sir, I am planning to install IM 2" lift kit and going with 265/70 r17 tires on my toyota hilux. Do i need to replace the oem uca? thanks
@diegobandido907 3 жыл бұрын
Same here 😅
@ironman4x4philippines20 3 жыл бұрын
No need if we go 2 inches only. On some vehicles getting the proper alignment will be difficult, so we need the UCA. But this is on rare cases.
@ironman4x4philippines20 3 жыл бұрын
Asian brands usually use heavy duty Australian springs for light vehicles, so they get over 2 inches lift and suggest the UCA. The bad thing is, their shocks are short, so there is no more sag and ride is horrible. For more info on sag measurement, see the video here: kzfaq.info/get/bejne/Z5ano8eb1ZfJfJs.html
@zedcal2552 4 жыл бұрын
Sir, if i go for ironman foam cell pro kit for my 2017 wildtrak plus 2” body lift, is a drop kit still required? Can u also let me know what is included in that kit in Philippine market? Thank you in advance.
@ironman4x4philippines20 4 жыл бұрын
The foam cell pro kit doesnt need a diff drop kit since its a proper 2 inch kit.
@ironman4x4philippines20 4 жыл бұрын
We have a 3yrs/60000 km WARRANTY Ironman 4x4 Australia SINGLE BRAND promo set for Struts Coil and Leaf Pickups and SUVs - Nitrogas kit 37500 - Foam Cell kit 47500 - Foam Cell Pro kit 71500 You get: - 4 pcs shocks - 2 pcs front coilsprings - 2 pcs rear AddALeaf springs - 3 year/60000 kms worldwide warranty - Australian brand with 60 years experience - Australian R&D - sold worldwide - a proper website and aftersales department in Australia - no magic shackles, no spacers - not a rebrand www.ironman4x4.com
@lenzpaolomarzan43 3 жыл бұрын
2 inch lift and 285 70 17 in my hilux revo. Do i need aftermarket UCA?
@ironman4x4philippines20 3 жыл бұрын
The main question is, "Could your vehicle be computer aligned? All within specs?" If yes, then you dont need the aftermarket arms.
@midyolagawan1391 3 жыл бұрын
boss Naka 2inch lift po toyota conquest ko 16x10 -44 offset mags Need poba Upper control arm midyu ma galaw po kasi sa Highway ang manubela.? thanks po
@ironman4x4philippines20 3 жыл бұрын
Magalaw yan boss kasi -44. What you can do is install UCA and have it computer aligned. Set caster to 4° or 5° to compensate for the offset.
@zhaiabuan3840 Жыл бұрын
Sir do i need uca on stock height? Will replacing my stock uca to iron man improves my ride comfortability? Thanks
@ironman4x4philippines20 Жыл бұрын
No sir. UCA is about geometry for lifted rigs, camber and caster. Comfort is about shocks and springs.
@zhaiabuan3840 Жыл бұрын
@@ironman4x4philippines20 thank you so much for the fast reply sir! Good day!
@MyRazerZone 3 жыл бұрын
Has the Ironman UCA for triton arrived yet?
@ironman4x4philippines20 3 жыл бұрын
Not yet sir. But they are coming soon.
@jerrymia1690 3 жыл бұрын
If 2" suspension lift for isuzu dmax 2018...do i need to change upper arm
@ironman4x4philippines20 3 жыл бұрын
It depends on the following: 1. Did you really get only two inches? The only way to know is a before and after measurement, and measuring the proper sag/droop after. 2. Can you align it properly on a computerized machine? - if it is a yes on both, then you dont need an upper arm
@KM15 3 жыл бұрын
If ever mag upgrade na ako ng uca kahit 2inch lift ako much better kaya para mas solid na set up?
@ironman4x4philippines20 3 жыл бұрын
Better adjustability sa camber and caster sir
@gadzy6109 2 жыл бұрын
Good day sir. My tires is AMP a/t 265 r20 and I fitted my 4x2 navara with iron man nitro gas. The problem is they fitted the front with iron man B spring. Sobrang tagtag. Na budol din ako putting trust sa talyer na wala ring alam dito sa cebu. Anyways magkano po ba ang A spring sir? Tnx po sa advice
@ironman4x4philippines20 2 жыл бұрын
Same price lang naman po. I think you need A springs with 10 or 15mm preload spacers
@Livinlife818 2 жыл бұрын
Do you have a website where I can purchase parts?
@ironman4x4philippines20 2 жыл бұрын
You can message me on FB sir. Pablo Lu Ascoba or our fb page Ironman4x4Philippines
@YouTube-Spinx 6 ай бұрын
Sir! Good day! Where can I purchase your product?
@ironman4x4philippines20 6 ай бұрын
We are available nationwide sir. You can message me on fb
@kanevivalakane3699 2 жыл бұрын
Hi. I have Prado V6. I installed 2 inch Dobinsons suspension lift. Should I get Upper control arms replaced also?
@ironman4x4philippines20 2 жыл бұрын
how's your wheel alignment sir?
@kanevivalakane3699 2 жыл бұрын
@@ironman4x4philippines20 Sir, wheel alignment is OK but I do not get the steering feel as before. It does not feel real like before.
@ironman4x4philippines20 2 жыл бұрын
@@kanevivalakane3699 then something is off. Was alignment done in a computerized machine using original oem specs?
@akif8012 4 жыл бұрын
Can I install a 3” lift on my FJ using this forged IM uca with 275*70R17 wheels -44mm offset and still achieve corrected alignment/ geometry? Please advise. TIA
@ironman4x4philippines20 4 жыл бұрын
Yes sir. I personally feel -44 is way out there, but as far as alignment is concerned, caster and camber, it will work.
@akif8012 4 жыл бұрын
@@ironman4x4philippines20 many thanks for your advice
@JJ-po9nb Жыл бұрын
@@ironman4x4philippines20 i have an FJ on 6” rough country kit + 37” KO2 tires. Do I / should i buy a new UCA ie) Ironman
@ironman4x4philippines20 Жыл бұрын
@@JJ-po9nb how is your alignment numbers on an alignment computer?
@user-pv9cf4fr6d Жыл бұрын
@@ironman4x4philippines20 i dont know. Not sure if its relevant info but I have inner tire wear in front, front tires look a bit flared out, and the kit is suppose to work with stock uca. Im concerned i also have ball joint issues (not confirmed)
@harkoroffroader8129 2 жыл бұрын
How about for Montero sir? Thanks 👍
@ironman4x4philippines20 2 жыл бұрын
Montero we have arms too if you need them. Also for mitsubishis wanting to run foam cell PRO, you need the ProForge arms to gain clearance for the PROS
@pauljm2094 3 жыл бұрын
sir may lower arm din po ba kayo?
@ironman4x4philippines20 3 жыл бұрын
No sir. Wala pa po. Sorry
@terseronginhinyero8505 3 жыл бұрын
Si gud pm po. Sir plan ko po mgpalit ng shock absorbers ko po amd cool springs to iron man po to improve more the stability of our car lalo na sa tagtag po. Sir my unit is fortuner 2018 4x2 po. Sir ang UCA maadvice nyo din po nah to for 4x2 po kagaya sa fortuner namin po? Salamat po and God Bless
@ironman4x4philippines20 3 жыл бұрын
For the 4x2 Fortuner we can run A springs front and rear since the 4x2 is 100kgs lighter in front, compared than a 4x4. The UCA is only a need if you cannot properly align your car on a computer. More info sir pm us on FB or email me at ironman4x4phils@yahoo.com
@terseronginhinyero8505 3 жыл бұрын
@@ironman4x4philippines20 thank you po and God Bless
@marklodge194 3 жыл бұрын
Hi sir can it works with my 3" lift kit?
@marklodge194 3 жыл бұрын
I'm sorry, I'm talking about the 03/4runner
@mohammadguiapal990 3 жыл бұрын
Toyota Prado, do yuo recommendcIronman shock absorber?
@ironman4x4philippines20 3 жыл бұрын
I usually recommend foam cells. The main reason is the Ironman 4x4 foam cells give you premium performance at the price same to the competitions nitro shocks.
@ironman4x4philippines20 3 жыл бұрын
What model is your Prado?
@kirkplacides7434 3 жыл бұрын
Hi Sir, just to confirm.. I dont need to get an aftermarket UCA if its only a 2inch lift - does that stay true if i upgrade from 265 65 r17 to 285 70 r17 tires? if im not mistaken that adds an extra 0.5 inch lift as well? Thanks in advance!
@ironman4x4philippines20 3 жыл бұрын
Yes sir. Tire size does not affect the angle of the control arms, and doesnt affect camber and caster. If you are running stock rims on a Toyota Hilux Revo, running 285s on the stock rims will cause the tires to rub the upper arms at full turn, while they will NOT rub on the ProForge arm.
@ironman4x4philippines20 3 жыл бұрын
As for your 2 inch lift, just as long as your rig can be computer aligned and get the factory specs for camber and caster, then essentially you dont need the upper arm.
@kirkplacides7434 3 жыл бұрын
@@ironman4x4philippines20 thank you for your prompt reply. i have a fortuner 2006 and currently running stock on 17s 265 60/ i plan on getting a 17x10 -18 offset on a 285 70 r17.. would that work on my stock UCA?
@ironman4x4philippines20 3 жыл бұрын
@@kirkplacides7434 yes it would work wih the stock UCA. The negative (-) offset means the tires will be farther from your UCA. So walang clearance problems. Now the new problem is how to fit the 285s with that offset sa 2 inch lift. It simply wont fit unless you cut and reweld the body mounts, plus/or force the suspension to about 2.5 inches. If you push the suspension to 2.5, you will need a UCA. Be careful of what UCA you will buy, as some dont change the geometry much, plus they run special bushings and balljoints, so maintenance is hard.
@kirkplacides7434 3 жыл бұрын
@@ironman4x4philippines20 hndi po ba uubra ung pag cut ng mudflaps or inner fenders pgka ganun? kasi nakita ko ung mga naka offset hnd mka full turn kasi tmtama sa mga tapalodo
@Thereseolalia2073 2 жыл бұрын
Do you have a uca for a trailblazer ?
@ironman4x4philippines20 2 жыл бұрын
If its the 2.5 duramax or 2.8 duramax we surely do.
@Revnge7Fold 2 жыл бұрын
Is that ball joint removable?
@ironman4x4philippines20 2 жыл бұрын
Yes sir! Replaceable with an oem balljoint, so parts are proven reliable and available from your vehicle dealer or parts supply.
@joseelvinvaldez9325 3 жыл бұрын
Sir. Pag naka 2 inch lift ako at plano ko mag change tire ng 285 55 r20 kelangan ko po ba ng upper arm? More power to Iron Man Philipphines
@ironman4x4philippines20 3 жыл бұрын
What vehicle sir?
@joseelvinvaldez9325 3 жыл бұрын
@@ironman4x4philippines20 Nissan Navarra VL 4x4 po
@pinoyobserver1190 3 жыл бұрын
Gudpm sir, pag nag 2 inch lift ba ako using ironman nitrogas, springs and ironman add a leaf sa strada 4x2. Proper lift na ba iyon na matatawag
@ironman4x4philippines20 3 жыл бұрын
If your sag measures properly then your fine. Do you recall your spring part number?
@pinoyobserver1190 3 жыл бұрын
@@ironman4x4philippines20 naku sir dko alam, papakabit pa lang ako this saturday sa projectarsenal shop in angeles, ironman nitro papakabit ko shocks, springs and add a leaf. Nasa tamang landas bko sir haha, palit din 17mags and bfko2 285/75r17. Ok ba yung setup na yan sir for 4x2
@ironman4x4philippines20 3 жыл бұрын
@@pinoyobserver1190 yes medyo malaki ang 285/70-17 pero parang okay naman.
@pinoyobserver1190 3 жыл бұрын
Ok thank you sir, go na ito this saturday, tnx again 👍
@ironman4x4philippines20 3 жыл бұрын
@@pinoyobserver1190 you're very welcome sir
@edmundtario 2 жыл бұрын
Where can i get that upper arm? How much is the ironman upper arm
@ironman4x4philippines20 2 жыл бұрын
30k a pair sir. Message me on FB, Pablo Lu Ascoba so we can contact you.
@steevhen5536 2 жыл бұрын
Sir question im planning this setup 2" lift nitro gas and 2" body lift i will add also a ironman UCA planning to put 305/55/20 is this okay?
@ironman4x4philippines20 2 жыл бұрын
On what vehicle sir?
@steevhen5536 2 жыл бұрын
@@ironman4x4philippines20 toyota conquest 2022 4x2 matic sir, just nitrogas i want its not for trail or off road just a lift and plus UCA
@ironman4x4philippines20 2 жыл бұрын
@@steevhen5536it will work. Just keep rim offset to 0 or -10 max.
@steevhen5536 2 жыл бұрын
@@ironman4x4philippines20 noted sir, XD titan rims 00 offset 20x9 is good right? coz my unit is 4x2
@ironman4x4philippines20 2 жыл бұрын
@@steevhen5536 seems okay for the rim sir
@dogsguardian7267 2 жыл бұрын
Good day sir yung upper arm po ba na after market nakakatulong po ba na dina umabot yung spring ng front shocks sa front swaybar? Naka 2" lift po ako. Salamat po.
@ironman4x4philippines20 2 жыл бұрын
Anong suspension gamit mo sir?
@dogsguardian7267 2 жыл бұрын
@@ironman4x4philippines20 profender po sir yung blue na kulay. By d way po salamat po sa pansin sir kahit busy po kayo. Kayo po ba yung dinayo ni sir geo ong? Salamat po.
@ironman4x4philippines20 2 жыл бұрын
@@dogsguardian7267 yes po sir. I think if may sayad sa swaybar, we can move the swaybar a bit.
@dogsguardian7267 2 жыл бұрын
@@ironman4x4philippines20 yan ba yung tinatawag nila na spacer po?
@ironman4x4philippines20 2 жыл бұрын
@@dogsguardian7267 Hilux Revo ba sir?
@richarddelrosario743 2 жыл бұрын
Sir gud day balak ko po magpalit ng magwheels para sa 2016 isuzu mu c ko po,,un po balak ko lagay na tires is 295 x 55 x 20,,ano po kailangan ko iron man kits para ma lift ng 2 inches ang car ko at ano mga kasama nun ironman kits at magkano po,,thanks po
@ironman4x4philippines20 2 жыл бұрын
295 is on the big side. Baka 295/50 pwede but dependent on offset. +25 is best. 2 inch kit ng ironman 4x4, nitrogas/foam cell will do with coils and UCA. The Isuzus suffer a bit without an UCA.
@richarddelrosario743 2 жыл бұрын
@@ironman4x4philippines20 how much po at ano mga includes item
@ironman4x4philippines20 2 жыл бұрын
@@richarddelrosario743 4 pcs Shocks: -Nitro 28k -Foam Cell 38k 4 pcs coils 22k
@greggjavier6205 2 жыл бұрын
Good day Do you have UCA for Chevrolet Colorado? Thanks
@ironman4x4philippines20 2 жыл бұрын
Yes sir we do
@greggjavier6205 2 жыл бұрын
Thank you Sir Punta na lang ako sa ironman 🙏🙏🙏🥰🥰
@ironman4x4philippines20 2 жыл бұрын
@@greggjavier6205 thanks
@alinormapandi2238 2 жыл бұрын
Matanong lng boss kapag a size ng tire no ay 285/70/17 kailanga ba ng upper arm kasi 2 inch lift din hehe Salamat sa sagot boss😅
@ironman4x4philippines20 2 жыл бұрын
Depends if pwede pa ma computer align then no need po.
@JudasBytes 2 жыл бұрын
i need UCA for 2017 Ranger. But not just an UCA. I am looking for a high-angle bolt joint. Is your UCA a high-angled bolt joint? can i bring my unit to your shop?
@ironman4x4philippines20 2 жыл бұрын
Hi sir. If you use our UCA you will not need a High Angle balljoing as our UCAs have a totally different ball joint angle. The UCAs have been shaped to provide better angle for lifted vehicles, plus more caster, and better camber angles. How much lift do you intend to run? What lift kit will you use?
@JudasBytes 2 жыл бұрын
@@ironman4x4philippines20 my Ranger has 4" Option 4WD Kit. I believe this is Thailand made and it's not that good but no other option in philipines. I have Option UCA and that was okay but I want to replace UCA for high-angled ball joint and also a replaceable or serviceable ball joint. My tyres are 305x55x20r10
@ironman4x4philippines20 2 жыл бұрын
@@JudasBytes okay. That will work.
@JudasBytes 2 жыл бұрын
@@ironman4x4philippines20 Does Ironman4x4 UCA work on 2017 Ranger? Are the ball joint replaceable or serviceable?
@JudasBytes 2 жыл бұрын
@@ironman4x4philippines20 where are you located in PH?
@jovitosalonga2558 2 жыл бұрын
Is it also fit for toyota fortuner
@ironman4x4philippines20 2 жыл бұрын
Yes sir. We have specific pro forge UCA for fortuner
@marccatamio 8 ай бұрын
Can you use a UCA under stock height?
@ironman4x4philippines20 7 ай бұрын
You can but you might not be able to get it aligned properly sir.
@marccatamio 7 ай бұрын
@@ironman4x4philippines20 thanks, tho my tires are a little bigger. Around an inch lift na and I'm getting this weired Camber issues every now and then 😅. Thinking if this might help since the old isuzu mux/dmax's have a short UCA
@ironman4x4philippines20 7 ай бұрын
@@marccatamio what modification did you do to the suspension?
@kevinsmith5401 4 жыл бұрын
Do they any thing for Mitsubishi Montero gen2 ?
@ironman4x4philippines20 3 жыл бұрын
Soon they will
@kevinsmith5401 3 жыл бұрын
Will they be available in the United states
@kanevivalakane3699 2 жыл бұрын
Is there UCA on rear also?
@ironman4x4philippines20 2 жыл бұрын
If you have an independent rear suspension like the pajero BK or Patrol Y62, yes there is. What is your car?
@kanevivalakane3699 2 жыл бұрын
@@ironman4x4philippines20 prado
@mravillegas 3 жыл бұрын
Is the ball join replaceable?
@ironman4x4philippines20 3 жыл бұрын
Yes sir. Using an OEM balljoint.
@mravillegas 3 жыл бұрын
@@ironman4x4philippines20 do have one for a 2010 mitsubishi strada? Lifted by 2 inches.
@jiaflores1922 3 жыл бұрын
Boss Good day saan tayo pwede maka order?
@ironman4x4philippines20 3 жыл бұрын
Saan po location nyo sir? We have authorized dealer nationwide po sir. We'll recommend you the nearest.
@jiaflores1922 3 жыл бұрын
@@ironman4x4philippines20 noted boss do I need this or pede na hindi, nka 2 inch lift lng aq sa ford ranger.
@ironman4x4philippines20 3 жыл бұрын
@@jiaflores1922 it really depends how the 2 inch lift was done. The biggest indicator is sag measurement. Kasi po most if not all springs are 2 inch lift if installed sa vehicle with the proper weight. Yung 2 inch spring can be a 3 inch or a 1 inch actual lift kasi.
@ironman4x4philippines20 3 жыл бұрын
@@jiaflores1922 sag measurement will reveal if proper yung 2 inch nyo or not. Eto link po: kzfaq.info/get/bejne/Z5ano8eb1ZfJfJs.html
@YGF00 4 жыл бұрын
when going for 2 inch suspension lift + 1 inch body lift and fitting a 295/70/17 tires would it be required to REGEAR? and what are the other things to do for do?
@ironman4x4philippines20 4 жыл бұрын
Hi sir! If you want to regain the original power, plus the original accuracy of your speedometer, odometer, trip computer, fuel mileage meter, a regear would be great. 295s are about 10% larger in diameter, so going up 10% on gearing will bring it back to normal or better. Based on my knowledge, 4.56 ratio would be ideal.
@YGF00 4 жыл бұрын
@@ironman4x4philippines20 thanks for the response much appreciated. May natutunan ako boss 👍🏼, how much would a ironman4x4 diff drop for hilux?
@ironman4x4philippines20 4 жыл бұрын
@@YGF00 we don't have diff drops from Ironman 4x4 at the moment. If you are running a proper 2 inch lift, there is no need for a diff drop.
@YGF00 4 жыл бұрын
@@ironman4x4philippines20 but its OK to install a diff drop on a 2" suspension lift kit?
@parisbradley8099 2 жыл бұрын
if my dmax is 4x2, do i still need an UCA?
@ironman4x4philippines20 2 жыл бұрын
If you lift the dmax 2 inches, you will have a hard time getting alingment to factory specs. I have a dmax here and I can only get 1.8 degrees caster. So an upper arm will definitely help.
@ironman4x4philippines20 2 жыл бұрын
Did you lift your dmax? How?
@parisbradley8099 2 жыл бұрын
@@ironman4x4philippines20 I was thinking about lifting it 2 inches using ridemax and muscle lift coil springs til I saw your video. Now I think I need more knowledge about suspension. My Dmax is 2020 4x2 and still at stock.
@ironman4x4philippines20 2 жыл бұрын
@@parisbradley8099 yes better to use high quality and vehicle specific components with a warranty. A complete kit from Ironman 4x4 with 4 shocks, 4x2 specific coils, and rear addaleaf is only 37500.
@parisbradley8099 2 жыл бұрын
@@ironman4x4philippines20 is the UCA included in that price?
@raymorales7300 4 жыл бұрын
Next re-gearing sir..
@ironman4x4philippines20 4 жыл бұрын
Sure sir Ray
@kghuamin4077 3 жыл бұрын
Sir for np300 2 inch lift , do i need a uca? TYI
@ironman4x4philippines20 3 жыл бұрын
Depends if your 2 inch lift has the proper sag/droop of 60mm. That means all is good. Another indicator is alignment. Can is still be aligned by a computer?
@kghuamin4077 3 жыл бұрын
The problem sir the stock uca always hits the strut mount , is that okay?
@ironman4x4philippines20 3 жыл бұрын
@@kghuamin4077 it will not hit if the lift is done properly. I think you used a spacer or quicklift which is the root of the problem.
@kghuamin4077 3 жыл бұрын
Sir thank you for your reply thats why i’ll be choosing the ironman forged uca . They put a RM 4 way shocks . I did not change my coils in front coz they say it’ll be okay , just the rear springs . The result not that good. Hopefully it will be solved by the forged uca.
@ironman4x4philippines20 3 жыл бұрын
@@kghuamin4077 if you used a quicklift spacer wth the RM shocks then your problem can not be solved by the uca. You should remove the spacer
@christiandionisio5768 7 ай бұрын
Hm
@ironman4x4philippines20 7 ай бұрын
32000/pair Philippine Peso
@sonnyvillegas5324 7 ай бұрын
hi! i need your company location in the Philippines. thank you.
@ironman4x4philippines20 7 ай бұрын
We have our stores in Banawe, Cebu, Bacolod sir, but we have dealers nationwide. Drop me a message on FB, Ironman4x4Philippines and Pablo Lu Ascoba foe details.
@lenzpaolomarzan43 3 жыл бұрын
2 inch lift and 285 70 17 in my hilux revo. Do i need aftermarket UCA?
@ironman4x4philippines20 3 жыл бұрын
The main question is, "Could your vehicle be computer aligned? All within specs?" If yes, then you dont need the aftermarket arms.
@snakeph 3 жыл бұрын
Do you have this for the ford ranger?
@ironman4x4philippines20 3 жыл бұрын
Yes we do sir
@lenzpaolomarzan43 3 жыл бұрын
2 inch lift and 285 70 17 in my hilux revo. Do i need aftermarket UCA?
@ironman4x4philippines20 3 жыл бұрын
The main question is, "Could your vehicle be computer aligned? All within specs?" If yes, then you dont need the aftermarket arms.
@lenzpaolomarzan43 3 жыл бұрын
@@ironman4x4philippines20 thank you so much sir. 👍
@ironman4x4philippines20 3 жыл бұрын
@@lenzpaolomarzan43 anytime sir. Stay safe!
Shock Surplus
Рет қаралды 49 М.
Kirill Multitool
Рет қаралды 71 МЛН
Azventures Australia
Рет қаралды 4,7 М.
Racins Adventures
Рет қаралды 36 М.
EXPOSED! Are bigger suspension lifts better? Experts show what really happens when you lift your 4WD
4WD 24-7
Рет қаралды 833 М.
Budget Build Garage
Рет қаралды 756 М.