Ironman 4x4 PRO Forge UPPER CONTROL ARM UCA Upgrade Install & Review Nissan Navara NP300 D23

Рет қаралды 36,976

Күн бұрын

NIssan Navara NP300 D23 Upper Control Arm UPGRADE to Ironman 4x4 PRO Forge UCA.
I've been waiting to do this upgrade for more then a year. Patiently waiting and researching what UCA's where available on the market to suit the 23.
I've struggled to get my head around the typical fabricated style tubular UCA as to there finished form I couldn't quite see the advantage to help with Down Travel / Droop... EVERY IFS owners problem...
When Ironman 4x4 released there aluminium PRO Forge Upper Control Arms to the market I knew right then and there I have to have a closer look at these... With a CNC design and using Forging technology. The shapes and profiles that have been created are next level.
I learned a loads of technical detail during the process with Kristian & the Team at Ironman 4x4 & had plenty of fun along the way. I hope you can also take away something from this video.
MAKE SURE YOU LIKE - SUBSCRIBE & COMMENT BELOW YOUR FEEDBACK...
Don't FORGET to FOLLOW my adventures on INSTAGRAM & FACEBOOK
Just search - RACINS ADVENTURES -
Keep chasing the MAGIC TEAM !
THANKS AGAIN,
Racin

Пікірлер: 50

@Australian4x4Adventures 4 жыл бұрын

Nice work Mr Racin. Glad to see you finally got that front end sorted. We’ve had lots of conversation about it over our time. Nice vid too 👍👍👍

@racinsadventures597 4 жыл бұрын

Ahhhh geezzz thanks Mr YT. Really appreciate you watching and your feedback. Always means sooo much. 🙏🏻💚 well as they say good things happens to people that wait. I was a patient boy.... and sooo greatful to finally get my front UCA’s in enables me to further fine tune and get it to work better then ever. 👌🏻👌🏻

@MudducksTouringAustralia 4 жыл бұрын

I will investigate these for my Ranger. Cheers Steve

@racinsadventures597 4 жыл бұрын

Hey Steve, thanks sooo much for watching 🙏🏻 always so grateful. Yup they are available for the Rangers.... check them out 💚

@gettindirty4x4adventure 4 жыл бұрын

Nice bit of gear🤙Looking at getting some ironman suspension on mine soon. Heard good things about there stuff.

@racinsadventures597 4 жыл бұрын

Thanks mate for watching.... Yes I’ve been running Ironman 4x4 FOAM CELL PRO for the last 2.5 years..... and now with there PRO Forge UCA’s..... to suit the 23.... fantastic combination....

@Johnnywraphood 4 жыл бұрын

Great work mate love the edit you did on this

@racinsadventures597 4 жыл бұрын

Thanks mate ! 🙏🏻🙏🏻💚💚 really means heaps coming from you ! 👊🏻

@Beers__On__Tour 4 жыл бұрын

Awesome video mate very informative loved it

@racinsadventures597 4 жыл бұрын

Thanks brother ! Thanks sooo much for watching. Always sooo grateful. 🙏🏻🙏🏻💚💚

@paulsordello 4 жыл бұрын

Great video mate, thanks for sharing. 👊🏼

@racinsadventures597 4 жыл бұрын

Thanks mate.... thank you for watching. Always means sooo much... thank you 🙏🏻💚

@bradneville2021 4 жыл бұрын

Awesome video and review... might have to do it now

@racinsadventures597 4 жыл бұрын

Thanks sooo much for watching brother ! You saw first hand how good they worked on the tracks... Definitely UCA’s that you have to seriously consider for your setup... 👌🏻👊🏻💚

@oneofthesedays4700 4 жыл бұрын

Can't wait to see your follow up video once you have used them a bit on the tracks :)

@racinsadventures597 4 жыл бұрын

As you know I was chasing the Magic last weekend. And wow !! Everything has changed.... the front really works much better now and has realised some more potential & articulation.... looking forward to keep fine tuning 👌🏻👌🏻👌🏻

@westernfilters1 4 жыл бұрын

Nice video mate !

@racinsadventures597 4 жыл бұрын

Thanks mate really appreciate your feedback ! Always so grateful.

@stevedupree6868 4 жыл бұрын

Cool video!

@racinsadventures597 4 жыл бұрын

Thanks legend! Thanks for watching 🙏🏻💚

@scotchyscotchyscotch569 3 жыл бұрын

What I like to know is, where is Ironman 4x4 foamcell pro kits and pro forge upper control arms built?. Are they made in China or Australia or somewhere else?. My mechanic was dissin on ironman cause he said they’re Chinese made, which might be a misconception on his part?. Cause I thought they were American slash Aussie manufactured. I’m in the decision of getting a full suspension kit for my Dmax from Outback Armour (adjustable bypass shocks) and buy the ironman pro forge control arms. Or go full ironman 4x4 foamcell pro kit with the pro forge upper arms.

@Morgs148 3 жыл бұрын

great vid. i have ironman in my d40.

@damosugden7264 4 жыл бұрын

Will have to see if they do one for my Pajero

@racinsadventures597 4 жыл бұрын

absolutley mate. Check out there website www.ironman4x4.com and fingers crossed they have them for the Padj. Thanks again for watching bud ! Always sooo grateful.

@mind0nr3wind 3 жыл бұрын

What traction board mount is that? I’m looking to offset mine the same way on a prinsu rack!

@Sunderlanding_AUS Жыл бұрын

this did not age well 😅😂 did they take care of you with the recalls and BJ replacements?

@lmalesci 11 ай бұрын

I have a question for you and I would like to know if you can tell me if it is true that the ironman nitro gas shock absorbers go well with the standard original trim and can they be adapted with the +5? I have a Suzuki jimny 4x4 with m13a petrol engine 1.3 lt petrol with factory standard shock absorbers and suspension set-up yesterday afternoon I picked up the new ironman nitro gas shock absorbers and the 4x4 spare parts dealer in Florence told me that these ironman nitro gas shock absorbers are fine for 4x4 off-road vehicles with a standard factory set-up or in a second I could put the springs higher and it becomes a high set-up +5 is it true? Greetings from Florence Italy!

@ziggycuzz4684 4 жыл бұрын

Great vid mate. I’ve been waiting for these for a while now. Looking to put some on my rig. How much do they retail for???

@racinsadventures597 4 жыл бұрын

Thanks for watching as always.... 🙏🏻💚 YASSSS like me I was patiently waiting for the right UCA solution..... the best upgrade I have done to my front end so far....

@ziggycuzz4684 4 жыл бұрын

Racins Adventures how much do they cost ??? 👍🏼

@kirkhamster0024 Жыл бұрын

How long do the greaseless IM ball joints last? Any warranty on the bushings and the UBJ? Also, how easy is it to replace the UBJ?

@cameronknudson8746 2 жыл бұрын

What size tires are you running on this truck?

@JudasBytes 3 жыл бұрын

Does the Ironaman4x4 UCA work on 2017 Ranger? Are the balljoints replaceable or serviceable? How come there's no cover on the balljoints? I do not believe dust won't be able to go inside the balljoints!

@kghuamin4077 3 жыл бұрын

I’ve bought iron man forged uca but with stock coils in front , solved the problem hitting the top strut mount , but the articulation or play of the suspension not that good , would you reckon if a change my front coils?

@thecap3189 3 жыл бұрын

What size lift did you have before the new uca's and what size did you upgrade to? 🤟

@Azntrutek2012 2 жыл бұрын

Maybe it just me but There aren’t much differentiate of the gap between strut bucket and OEM UPC arm vs to ironman. Does it worth to pay for the upgrade ?

@dangerdanadv1445 2 жыл бұрын

That little bit of gap is the difference between "CLANK" and silence

@marcusbarnes5929 2 жыл бұрын

How do these compare the superior engineering billet upper control arms?

@lukeambrose3787 4 жыл бұрын

How much lift in the front now after the upgraded springs? I currently have foam cell pros an would love to get more height from them

@alphascout1 3 жыл бұрын

I have a 2019 Nissan Frontier and like your yuca, where can we purchase one in the USA?

@craesh1001 5 ай бұрын

These look identical to the Nismo upper control arm. Probably the same thing.

@royvinator1945 3 жыл бұрын

Where are Ironman products actually made? Thank you.

@dangerdanadv1445 2 жыл бұрын

I just want that Jimny in the background, but I'm American :'(

@yourmotherlovesit 4 жыл бұрын

What are your centre of wheel to guard measurements at ride height and droop now? And why wouldn't they do a caster split to stop it wandering off to the left?

@racinsadventures597 4 жыл бұрын

That last tweak was done on the geometry just after I ran the camera across the numbers... but that’s ok..... good pick up mate 👌🏻👌🏻👌🏻 I currently have approximately 75mm droop... only limited by the Shock downward Travel ..... there is still downward available if the shock would allow it 👌🏻

@yourmotherlovesit 4 жыл бұрын

@@racinsadventures597 ok cool, so centre of wheel to guard height is about 540mm? (Or 590 if you have a body lift) putting current droop at 615mm?