Would they work with flexx bars?

I agree. He has a gift…very good at what he does.

You should answer homeboy about his flexx bars question

@@dustinrichards8401 You can use it with any 1- 1/8 bar Including flexx bar. I don't think you need a flex bar if you have the clamp.

@@roberturmosi-dirtbike-atv I was just wonder if the anti vibe setup would work with the flexx bars

I can't wait to hit the trails with them this year man!

@@MichaelSabo do you know what style bend those pro taper bars have in the end of the video?

@@MichaelSaboThose narly Test scenarios,Epic Humor Michael you killed it!!Enjoyable Weekend

@@Justinhofmann88 the ones on the bench are ATV high bend

I appreciate you watching them man!

Thanks for the shout outs and using some of our footage! 😬🤘

@@PeteHager Thank you for letting me use it dude, it added a nice touch!

Lol

Glad you like the video man! They are going on the Voodoo Banshee, so yes, I will have some testing!

Thank you for watching them man!

Thank you for watching dude and for helping out with the footage!

It should fit, definitely if you have an aftermarket stem. Robert from Urmosi is also very responsive if you contact him on his website.

🤘

Thank you for following the build man!

I also picked up a set for the dirt bike....any " I wish" thoughts on this product yet for you? On sale now...299 that's why I purchased 120 less than mako

@@anthonygrijalva8821 My own "I wish" is that they were $120 off when I bought them.LOL. No, I'm very pleased. Great product.

Ill try them out for you and let you know; this set is going on my Banshee

Thank you for watching Mason!

I just said the same thing lol. Well I asked how come he didn't get the flex bars.

Being so pricey would be nice to know what 1 is better

The Flexx bars have a very proven reputation and tons of riders like them! I’ve had positive experiences with both set ups. I’d say the main difference is the Flexx bar ends hinge independently from one another in a vertical motion whereas the 720 clamps technically dampen in every direction, forward, backwards, up, and down. Both do their job great and I’d say it’s personal preference for which direction you go with your set up 👍

Thanks for the reply pete...your the man! I subscribe to your channel as well and know your review will be spot on

I've used both; I personally would prefer regular anti-vibe clamps over Flexx. This is just my preference keep in mind. I second what Pete said but also the thing I personally don't like with Flexx bars is that they pivot downward on each side which make you lose the linear and connected feel of having the bars fixed. It's also a heavier system and requires more maintenance. Again, just my .02; Flexx have been around for a long time and a lot of people love them.

Even at 200 I'd be like yeah I definitely need them

the pricing is in line with everything else on the market. you want a $120 steering damper system? LMAO, yeah sure, maybe some chinese garbage.

Thank you bro; I think you'll be happy with these!

Single carb kit also

Great that you mentioned you have to run fat bars, not everyone wants them for reasons like you said. Also, I’m pretty sure Urmosi had an accident years back where he hit his face directly on the handlebar pad and ended up getting hurt. I know he wanted his bar pad to offer more protection then normal and I’d say he accomplished that goal 😊👍

It is definitely a big bar pad haha; always appreciate the feedback Jessie 🤘

@@PeteHager Thank you Pete! That’s exactly right my helmet broke after an over jump and I was make sure the 720 pads gives great protection. Also if it’s on the machine don’t look that big

@@roberturmosi-dirtbike-atv I actually cracked a helmet on a cross bar but that was an interesting wreck to say the least haha

I personally dont like Fasst Flexx because they flex too much. However because this flexs and the bar shape doesn't change you don't even notice unless you take a huge hit and then youll be thankful it moved as much as it did. Trust me I'm the first guy to say antivibe is not needed. BUT this set up is SOO Different than anything else. I won't own a quad with out it from here on out.

@@BrewerOffroad thanks for your input Brewer🤘, I get what your saying between those two setups.

@@BrewerOffroad you can make them flex bars flex as much as you want.mako 360 does what this clamp does also.i use them both

Mako 360 wont flex.and it is same type of clamp

Thank you Dave! I recommend them man. If we get a chance to ride together this year, Ill let you try mine out to see if you like them.

@@MichaelSabo we will have to meet up for a ride I have a few I'm tring to make it to at worst case I'll drag you up here to hit a few local parks

I use flexbars with the mako360 clamp on my trx250r

Id stick with the mako.i run the mako360 with fasst flexx bars

The ones in the bench shots? ATV High Bend in Platinum - bit.ly/3LUtQSS

@@MichaelSabo yea ok thanks man

Yeah that’s a bit ridiculous

More than ridiculous get a pair of flex bars

When you did that test that steering stem sure did move a lot are them bushing soft ones on the stem

The ones in the video pulling back and side to side are soft. It looks crazy but you feel very connected while riding.

Flexx bars pivot downward and the bars no longer have a linear, connected feel. I just don't like the way they feel, plus they're heavy and require more maintenance. Just my .02, it all depends on what you like.

Trust me you don't want your arms feeling like jello while trail riding cause you are dealing with arm pump. In which can lead you to loose grip on the handlebars and you can hit someone or smoke a tree. I found out while racing my quad when I had arm pump and I lost grip of the bars while going into a turn.

I’ve ran mine for quite awhile and they haven’t slipped or done anything they weren’t supposed to the entire time. Here’s a full ride video in the rain 👍 kzfaq.info/get/bejne/d5l5abKovt-2d6M.html

It's a well engineered product thats been in use for a while. Urmosi works with pro riders for testing and they put these things through a lot before putting them on the market 🤘

@@MichaelSabo thanks for replying so fast man your allways a big help and i love your videos i get lost watching them for hours and the grate detail u go into on parts and how things should be done u film everything perfect and its easy and i fill more confident working on my own bikes now from watching ur videos people probs allways tell u that allready but its true so thank you man

@@glennnikkelson3082 that's a huge complement man; I'm happy you enjoy my videos and get something out of them too 🤘🤘

@@MichaelSabo i allso just got me self a 700cc limited addition 2005 black and gray raptor thanks too you and watching your videos iv allways been a two wheel kind of guy but since haveing my quad and im in love with the thing bad

We have an adapter to make it work with the yfz450 stock stems

Lol.its a mako360.wow.close but no.not a mako400

I'm wondering the same thing. I rode with Flexx's for years, but finally took them off. They didn't make that much difference and the weight of the bars causes a noticeable change in handing. So, if someone tells me they are MUCH better then Flexx, I'm in. Otherwise, I'll pass at $400

I don’t know if these will work with flexx bars but I do know the mako 360 works with flexx bars.

@@bryanhryb3598 what’s the mako 360

@@dustinrichards8401 similar clamp that was 1st to design a clamp like these.thats what i use.mako 360 with fasst flexx bars

Works with any 1-1/8 handlebar. I don't see you need a flexx bar if you gettin a 720. The clamp can flex more in every direction then flexx bar ever can up and down

@@roberturmosi-dirtbike-atv the only reason I ask is because I already own the flex bars. Your products are great, I've used them in GNCC. I want to use this, but I'm already invested with other anti vibe systems :( I'm only so rich lol

@@PhillyLS1 Understand! I hate to say it but Flexx bar is an old design and like I said only helps a little bit with up and down movement. I don’t try to sell you the clamp by saying yes will work with it. I recommend the 720 with any fat bar. A regular 1-1/8 bar cost $80

Lmao 😂