Userwish 3 - Catia v5 GSD Training - Multi section surface

No video

Userwish 3 - Catia v5 GSD Training - Multi section surface

Рет қаралды 23,295

Wolfgang Walden

Күн бұрын

Пікірлер: 45

@alexandernaljot1769 8 жыл бұрын

Vielen Dank Herr Walden. Sehr ausführlich!!

@mansourroshan2859 4 жыл бұрын

Thanks for all your efforts to prepare helpful tutorial .

@wolfgang.walden.cad.training 4 жыл бұрын

You´re welcome

@jefsimote267 3 жыл бұрын

Thank you so much !!! Nice tutorial when you need leaning for yourself.

@wolfgang.walden.cad.training 3 жыл бұрын

Great you´re welcome

@rk28283 3 жыл бұрын

Sir in this diagram at the top and bottom there will be one attachment, you missed it, how to draw it sir?

@wolfgang.walden.cad.training 3 жыл бұрын

Which diagram?

@vincenzoforleo2566 10 жыл бұрын

Ciao Wolfgang, I got an error I couldn't explain. When it comes to copy the Sketch.1 to create the Sketch.2 and than modified its supprt, I get an error message which says me that "one or more constaints are not compatible with the resultant geometry". Actually I followed step by step your procedure, by I keep to have the same error. Vincenzo

@dionismarku8272 4 жыл бұрын

Hallo Hr. Walden. Das ist eine sehr umfangreiche Übung. Ich habe eine Bitte: Können Sie ein spezifisches Video, wo Sie den breitesten Befehle von GSD in Tiefe darstellen und erklären, und zwar den "Sweep" Befehl? Ich habe nicht spezifisches im Kopf, was Sie zeichnen sollten, vielleicht, etwas wie hier.

@wolfgang.walden.cad.training 3 жыл бұрын

Sorry, momentan habe ich absolut keine Zeit und es sind schon sehr viele Videos mit allen diesen Befehlen in meinem Kanal zu finden. Z.B. der Stossfänger/Rear Bumper oder der Brennraum, etc.

@dionismarku8272 3 жыл бұрын

Ist in Ordnung, ich danke Ihnen sowieso für alles, was Sie bist jetzt dargestellt haben.

@benfranke4824 10 жыл бұрын

Thanks for the Tutorial. It really helped. I appreciate you talking thru what u r doing. Some of these videos on u tube do not take and they are much more difficult to follow. What version on V5 are you using in this turorial?

@wolfgang.walden.cad.training 10 жыл бұрын

Thx :) - I think I used V5R21.

@Soljarag5 10 жыл бұрын

great tutorial, thanks!

@wolfgang.walden.cad.training 10 жыл бұрын

:) - you´re welcome!

@zahragholivand1808 7 жыл бұрын

Hi Sir Why did you insert several Geometrical set ? Is it necessary for all big project?

@wolfgang.walden.cad.training 7 жыл бұрын

If you do GSD you should order & structur your model by geometrical sets. otherwise it is very difficult to handle.

@zahragholivand1808 7 жыл бұрын

Thank you so much

@wolfgang.walden.cad.training 7 жыл бұрын

you´re welcome

@bullgoshit 7 жыл бұрын

what is the significance of creating those geometrical sets for curves, sketches etc sir....?

@wolfgang.walden.cad.training 7 жыл бұрын

In generative shape design you need to keep the order of the elements yourself - because the software doesn´t care - so to get some stucture into your model you have to use geometrical sets (folders)

@bullgoshit 7 жыл бұрын

Wolfgang Walden sir can you please put up a video for mud-guard of bikes.

@wolfgang.walden.cad.training 7 жыл бұрын

Do you have a drawing?

@bullgoshit 7 жыл бұрын

no sir. in specific I don't have any such drawing. can we creat it by looking at any 3d photo of it? I just wanted to know how step by step you think, and the procedure that you follow when it comes to surfacing in catia.

@wolfgang.walden.cad.training 7 жыл бұрын

Swapnil Pawar I suppose you could do it yourself? Because with only a photo it is just guesswork.

@bullgoshit 7 жыл бұрын

why i do you sir hide the yellow elements...??

@wolfgang.walden.cad.training 7 жыл бұрын

Just take a look here kzfaq.info/get/bejne/q56FqtOZxLTXdYk.html

@zeeshan2k5 6 жыл бұрын

I am stuck with elongted hole, can't draw that. need help

@wolfgang.walden.cad.training 6 жыл бұрын

Use 2 circles and a rectangle.

@zeeshan2k5 6 жыл бұрын

thanks sir, done it.

@parshenisaghoolian2114 6 жыл бұрын

how can i creat an axis system like yours , mine is very small

@wolfgang.walden.cad.training 6 жыл бұрын

I would advise you to watch my Catia v5 Basics Videos ;) go to Tools->Options->Infractructure->Part Infrastructure->Display - there you will see as slider which controls the size

@parshenisaghoolian2114 6 жыл бұрын

thank you very much you are the best

@wolfgang.walden.cad.training 6 жыл бұрын

Thanks :)

@lanpham8476 7 жыл бұрын

Thanks for your video, it is very helpful. I have some troubles when I used it. Could you teach me to solve those? 1. I compared Catia and CImatron, in Cimatron I can cut many planes at the same time, but in Catia I cannot do that. Can you teach me command to cut many planes at once. 2. When I open files which are saved by *.igs and it has many parts but I cannot separate them well because they are in the same a folder. Please, help me. Thanks!

@wolfgang.walden.cad.training 7 жыл бұрын

1. Hi, sorry I ´ve never heard of "Cimatron" before. Could you please explain: "cut many planes at once". 2. Again, what is your problem? I would need a sample file.

@lanpham8476 7 жыл бұрын

Hi, Wolfgang Walden, I sent to you message via Messenger. Please teach me to solve them. Thanks a lot.

@wolfgang.walden.cad.training 7 жыл бұрын

I would try to help - but you have to explain the problem in more detail and please send me an example.

@lanpham8476 7 жыл бұрын

I sent 2 files to you, did you not open them?

@wolfgang.walden.cad.training 7 жыл бұрын

When did you sent them? To which emailadress? I have not received it, sorry.

@jenacbxx 8 жыл бұрын

ty so much!!!!

@wolfgang.walden.cad.training 8 жыл бұрын

+jenacbxx You´re welcome!

@venkatsubramaniam8019 6 жыл бұрын

Dear sir, can u do detailed tutorial regarding surface design in catia. Like explaining sweep, multisection, blend ,split, etc.... All tools in surface design. Pls sir

@wolfgang.walden.cad.training 6 жыл бұрын

There are already many exercises regarding this topic, just check out my other videos in the catia gsd playlist.