You're welcome

Nice! You're welcome!

Walang anuman po. God bless din!

You're welcome

You're welcome!

You're welcome!

Salamat po!

Depende po yung speed sa specs nung router. Luma na tong model na to, kaya I assume hanggang 100MBPS lang kaya nya. Pero try mo din. Libre naman yan kasi luman router lang gagamitin mo.

Reset ang retry. Pag ganun pa din, baka yung old modem sira na talaga. But do note na lumang modem na ito. Yung max speed nya mas mababa compared sa latest modems ngayon. I think 2.4ghz lang din ang band nya, wala pa syang 5ghz band

Have you enabled the admin stuffs shown in the previous steps?

You're welcome!

Hindi po pwede wireless. Thru LAN cable lang pwede i-connect ang old router sa source router.

Walang ano man po

No, I had the same problem. The UI of this old rputer is weird

@@ribbytrivia Indeed its weird. Even the credentials sometimes changes itself for some reason. Oh well at least I got it working as a repeater. Thanks again mate!

Wala po bang paraan na matangal ang blinking red light ng LOS??

Nope. Since access point na lang sya, at di na direct sa provider ang connection, magbi-blink talaga ang LOS

@@ribbytrivia sir may PLDT modem ako na disconnected which is gamit ko as wifi extender ng more than a year na. Ano po kayang problema? Bigla nalang siyang di gumana at nawala na ung blinking LOS niya then power and WLAN nalang naka open na ilaw sa router.

@@user-yz7nn5ne7u Maraming pwedeng source ng issue nya. Pwedeng yung RJ45 cable, or may nabago sa settings, or yung modem na mismo, etc. Isolate mo na lang muna. - Try mo palitan ang LAN cable - Try mo reset ang router at configure mo ulit Kapag ayaw pa din, baka yung mismong router na may problem.

Well, I'd like to help, but that would be very challenging. First is the communication - it's easier to isolate the problem if I can see what you are doing. Second, if you yourself can't even identify what you did wrong, how much more to me? When I am not even involved in your process. And lastly, all the tutorial I can privide are in the video, which are limited only to the specific router I used. I am not an expert nor a router support person. I just experiment on the old router and share it in the video. It's just something I do on my free time. Good luck though. My suggestion is take a look at my videos about tenda routers. Just buy that router as they are very easy to setup.

@@ribbytrivia thanks for your reply . Do you allow me to contact you to solve my problem?

@@mahdiazimzadeh5412 As mentioned, this is just a hobby. It's not full time. Sorry.

Depending on the pocket Wi-Fi device. It will be difficult to share that through a router if it has no RJ45 (LAN) port, and since you mentioned "pocket", I assume there's none. But in a slim chance that there is a LAN port, I'm sure there's a way... just not sure how specifically, since I will need a that pocket wi-fi device to play around to find out, and I don't have any pocket wi-fi with me.

Malamang nabago na yan.

You'll always need a physical cable connection. Even mesh system needs cable

Access-in nyo yung routee config sa new IP na in-assign nyo sa kanya. Dun nyo palitan wifi SSID

same saken, ayaw gumana sa na assign kong IP, sa cmd ipconfig walang default gateway, awitssss

Baka sira na talaga ang lumang router. Check mo videos ko about Tenda routers. Bili ka na lang ng ganun. Mura na router yun, at napakadaling i-setup

​@@ribbytrivia boss Converge moden pwede po ba lagyan wifi extender ?

@@joshfrancisco7676 Pwede po. Same process. Mag-iiba lang yung IP Address mask. Susundin mo yung unang 3 set ng numbers ng IP Address ng Converge.

If you already have a connection from this router, you're good.

@@ribbytrivia thank you i was just worried if this extender can damage my main router if i didn't change the settings

I don't know how else to reset. It's the only way I know. Maybe the router is already defective?

Madaming possible na source ng problem... Pwedeng yung LAN cable, pwedeng yung router mismo sira na, o baka may na-corrupt/nabago sa settings. Try mo palitan ang rj45. Pag ayaw pa din, try mo reset ang router at configure mo ulit. Pag ayaw pa din... Baka router na mismo may problem

Each router model has ots own settings menu. I don't have that model so I can't help you find it.

Yes. Technically, repeater is wireless talaga. Pero mas widely known ang term na "repeater" vs. sa deeper technical term na "access point". Kaya I use the term repeater para mas madaming tao ang makaintindi ng purpose ng video 😉

Sorry. Di ko pa na-encounter yang model na yan

Pwede po. Basta sundan nyo lang yung unang 3 set na numbers ng IP address ng main router

100mbps

Yes. Same concept lang naman kahit saang router. Nag-iiba lang sa settings menu/layout ng router

Di ko din po kabisado. Igu-google ko lang din kung sasagutin ko, kaya mas ok kung kayo na mismo mag-google. 😁 Hindi po ako expert sa mga routers. Nag-e-experiment lang din ako kung pano ko mare-reuse yung lumang routers.

Yes you can

Di pwedeng gamitin ang USB ng router para mag-provide ng internet. Ginagamit lang yan for Firmware updates or kung gusto mo i-power ang device like fan

It's hard to isolate the problem through comments. Make sure to follow step by step, and use the proper mask for the static IP.

Try isolating. Change the lan cable. Or reset and reconfigure. If it is still happening. It Might be an issue on the router itself.

paano mo na log in yong adminpldt sir? na try ko na both password mali parin.

@@jimmyvillaces2887 Direct lang yung password sa video, gumana naman. Basta di pa napapalitan ang password, gagana dapat yan.

All passwords are now in the video description

Yes. Just make sure you are connected to the router's SSID.

Nope. Even on mesh, yung main mesh mo kelangan naka-connect thru LAN. Yung nodes lang ang wireless

@@ribbytrivia ah ok. Noted boss

Wala po e. Try nyo din search. Baka may bagong nag-publish. Indicate mo lang exact model ng router

Same issue.. i cant find it..😭

What do you mean nawawalan ng data? Yung connection napuputol? If yes, baka sira na yung router mismo

@@ribbytrivia yes sir, napuputol ang connection.. posible nga baka sira na router. thank you boss!

Di po pwede wireless ang connection ng lumang router to source router. Pwede wireless kung mesh gamit mo, pero yung main node ng mesh mo kailangan pa din may wired connection sa source router

kzfaq.info/get/bejne/n611fNSHtLHRl2g.html It's originally Converge, pero walang bearing kung saang ISP galing ang router. Basta same model, same process lang yan.

Sorry, di ko pa na-encounter yan. Try mo na lang i-reset ulit. Pag ganun pa din, baka sira na yung router mismo

Yes. Just need to follow the IP Address mask of the provider when setting the static IP (e.g. 192.168.1.xxx for PLDT, 192.168.100. xxx for converge, etc.)

Pwede po

Di ko pa nata-try yan. Pero luma nang model ang router na to. Malamang hindi pwede. Ang silbi ng USB ports ng router usually ay for Firmware update lang at pwede din gawing source ng 5V power. Also, may sarili nang modem ang mga phone, pwede mo i-on ang hotspot, makaka-share ka na ng internet. Bakit papadaanin pa sa router?

Kailan lumalabas yan? Anong part na ng step? Kapag pinalitan mo na ang IP address ng router, yung bagong IP nya na ang access nya ha

Gagawa lang po yan ng extension ng signal ng wifi. Magdadagdag ng access point kasi iko-connect mo yung lumang router sa main router. Tapos yung lumang router magta-transmit din ng wifi signal. Walanpong kinalaman yan sa pagpapa-stable ng connection ng main router. Kung yung main router nyo no signal, or weak signal, same din makukuha nung naka-connect na lumang router.

pldtadmin account?

Wirelessly is impossible. Even on mesh nodes, which is intended to be wireless, you still need to connect the main node wired.

@@ribbytrivia Wired connection is working But Red light blinks internet connection is working only a red light problem

@@zaidlatifqureshi4542 If the red light is on the LOS indicator... that is fine. LOS indicates connection from the fiber line, which your old router obviously does not have, since you are using it only as an extra access point.

@@ribbytrivia Thankyou Bro ❤️

@@zaidlatifqureshi4542 no problem

Depende sa router kung may settings na ganyan. Pero wala itong specific na router na to. Luma na to. Kung bagong model ang main router mo, mas mataas na max speed nung for sure compared dito. At di naman yan parang flow ng tubig na nahahati talaga yung speed. 😁 Baka may mg interference from main router mo kaya bumabagal.

Yes. Same process. Follow mo lang ang Ip Address mask ng source router

Lumang router na yan. Kaya ang maximum speed na kaya nya ay 100mbps lang talaga. Yung hardware nya hanggang dun lang ang kaya. Bili ka na lang ng router na kaya hanggang 500mbps or more, tapos yun ang gawin mong extender kung gusto ma-maximize ang speed

boss ask lng ako pano kung ung main router mo is prepaid wifi lang pwd bang gawing wifi extender ung postpaid na modem?​@@ribbytrivia

@@sunghyunra1989 Pwede. Basta sundin mo lang yung unang 3 sets ng IP address ng main router mo para sa static IP ng extender.

It was probably changed before. Admin accounts cannot be reset

Pwede! Yung IP subnet mask ng converge lang susundin mo = 192.168.100.xxx Lahat ng ibang steps same lang

Sorry, no idea where to get a firmware

Basta nakokonektahan ng LAN cable yung source ng internet mo, pwede yan

May maximum speed lang ang bawat router. Medyo luma na itong extension router na gamit kaya 50mbps lang pumapalo. Yun na max speed nya.

@PopoY random vlogs What do you mean "mag bandwidth"? Sa pagkakaalam ko noun yung bandwidth, hindi verb :) Di ko gets.

@PopoY random vlogs Ah. Pwede pero depende sa modem mo. Lahat ng settings/features ng router intact pa din naman. Ginamit mo lang sya sa ibang purpose.

Pede. Kung same model lang ng router, same steps lang. Kung ibang model, same steps pa din, pero baka iba ang settings. Ang idea lang ay (1) reset yung lumang modem, (2) disable dhcp, (3) assign static IP na tugma sa source - PLDT ay 192.168.1.X - yung X any number from 2 to 254 (4) Tapos. Saksak mo na sa LAN 1 from source.

Sorry, kung napalitan na ang admin password, di sya narereset. Kelangan mo talaga alamin kung ano yung password, otherwise wala na talaga

Prepaid ba main nito?

Hindi. Fiber yung main

Lumang router na yan. 100mbps lang ata max nyan

@@ribbytrivia ayy, pag ganyan setup pwede ba prepaid main wifi nyan?

Yes, working pa. Kaso pag yung admin password mo nabago na tapos di na alam kung ano, di sya narereset.

@@ribbytrivia Nakailang reset na din po ako ng router. Then may record naman ako ng lahat ng password and username ayaw pa din. Nagtry ako today hindi talaga ako makapasok sa super admin and administrator. Even sa cellphone nagtry ako magconfigure ayaw pa din.

Same prob hndi maka acces laging error lumalabas pag nag lolog in

same sakin di na aaccess yung super admin sinunud ko lahat

Pwede po kahit ano i-connect. Pwede din LAN cable sa ibang LAN port nya. Normal na router lang sya. Kung ano nagagawa nung main, ganun din sya

Kelangan admin talaga. Baka napalitan na ang admin password nyang modem dati. Hindi sya narereset

Yes

Yes

Baka may nagbago na ng password ng superadmin ng router mo. Di sya nare-reset

I know

@@ribbytrivia the title says otherwise

​@@QuestMajor Like I said... I know. I made a business decision of putting "Repeater" in the title, as that is a more widely understood terminology, as compared to "Access Point" or "Bridge". I anticipated that the video will not catch the interest of most people if I put the deeper technical (but more accurate) term in the title - as what happens to most things as well. If it's too technical for most people to understand, they won't bother looking into it. Consider this... as of writing, the video has 62k views, and you are only the 2nd person to correctly call out the inaccurate title. Out of those tens of thousands of people, only 2 of you. Repurposing the router to extend their Wi-Fi signal is more important to 99.99997% of these people, than to understand the correct terminology or the differences between Access Point, Bridge, Extenders, and Repeaters. Not all people, actually, most people watching my videos are not that technical to bother with these things. I'm not saying that my title is correct because of these reasons... of course not. You're point is valid and correct, no doubt. I'm just saying that I don't see any value, especially to the audience and my channel, if I correct the title now.

@@ribbytrivia okay thanks for the misinformation for the sake of clickbait

@@QuestMajor Yeah... whatever keeps you in your high horse buddy. 🤣 I've explained everything on my side. I'm not sure if you even read or understood any of it, but that's on you. Aint nothing I can do about that. Also, lookup the definition of "clickbait"... you might have a different definition of it. 😅

Baka sira na yung modem mismo. Try din i-reset ulit, at gawin lahat ng steps. Pag ganun pa din, modem na siguro talaga may problem

Try nyo i-reset ang modem at ulitin lahat. Pag same pa din, yung modem mismo baka sira na

@@ribbytrivia Same parin talaga sir puro Obtaining IP address after ma modify

@@EzklFlrs Baka yung modem na siguro talaga ang may tama.

Baka may nagbago na dati. Di sya nre-reset e

Baka napalitan na ang admin password. Di sya narereset

Baka pinalitan na ang password. Kung napalitan na yan, di yata yan napapasama sa reset.

Nasunod ko na lahat ng steps pero wala padin kahit mag bayad lng ako sa gcash sir. Videocall lang po.

Baka pinalitan na ang password. Kung napalitan na yan, di yata yan napapasama sa reset.

Kapag nagkaroon ng ng same eouter, gawan ko ng video din

di din kasi nag gana ung password sakin. thanks po

Kapag napalitan na ang admin password, tapos nalimutan, mahirap marecover. Di sya nare-reset e

​@@ribbytriviaWhat if po napalitan tapos may record ng password. Ano po next gagawin? Ayaw po gumana saken

@@rainedeveraux2485 Sundan nyo lang po step-by-step yung video. Yan na mismo ang gagawin, wala na pong iba. Saang part po ba ayaw gumana? Anong error? Wala bang signal? Ayaw maka-connect? Sobrang dami pong pwedeng maging meaning ng "ayaw gumana", kaya please be specific po. Anyway, hindi naman po ako expert sa mga routers na ito. Ine-experiment ko lang din kung papano ko mapapagana. Kaya yung video, yan na po mismo ang alam kong way para mapagana sya. Kung sure po kayo na nasundan nyo ng tunay na step-by-step yang video, tapos ayaw gumana, baka po sira na ang modem.

@@ribbytrivia yung superadmin po

Especially the super admin username and password po. :(

Nasa Video Description na lahat.

Yes. Same process pero yung IP ng globe ang susundan mo na format para sa static IP ng lumang router

Not sure. Di pa ako nakakapag-try mag-flash. Sorry

Bka po sira na yung lumang modem

i doubt. I tried other tutorials but its not working din. Do you have other ways to configure this one? Its pldt hg6425d

Na try nyo na ibang browsers? Opera, Chrome, edge?

@@ribbytrivia opera hindi pa. Na try ko sa chrome, firefox at edge

@@TestrPgmfi Sorry, I'm out of idea. Probably sira na yung mismong modem?

@@ribbytrivia di namn cguro, nakaka connect pa naman ako. Kahit reset ko ganun pa rin

Not sure. Di ko pa na-explore yan

English please

Is it possible to convert it to epon? @@ribbytrivia

@@firmwarepreset Sorry, haven't tried that yet. Do let me know if you tried. :)

Sa akin din hindi gumagana

Use nyo yung 2nd option to log in

Wala na sa akin ang router kaya di ko na ma-test. Pero nasa settings lang yan nung router. Hanapin mo SSID

Hinde ko po ma access yung old pldt na router ko po, kasi yung IP po sa router ko is IP na po nong main router ko, paano po ma acces yong repeater(PLDT) ko po?

@@jcaureo2828 Ok lang po yun kahit same sila ng IP. Wag mo muna i-connect ang repeater mo sa main router. Tapos Kelangan mo lang kumonek sa SSID ng repeater mo. Tapos punta ka sa browser, i-type mo na IP address nya sa address bar. Maa-access mo na settings nyan.

Okay po try ko po.

Hinde ako maka connect sa SSID nang repeater ko po, lagi nalng "obtaining IP address" ☹️. Help po

Pwede po. Same process, basta sundin nyo lang format ng IP address ng main router. Iibahin lang yung dulong number

Ano ibig mong sabihin na P2P ang main router? Di ko gets

@@ribbytrivia pano ba to haha, yung provider kase namin dito parang multi source sila, globe, pldt at iba pa tas yun yung dinidistribute nila saming customers nila. Ngmamatter ba yun or sa router lang?

@@mejoradagerald Legal ba yan? hahaha... parang hindi. Mahirap gawan ng bagong access point yan kasi iba iba ang sub net mask ng bawat provider. Yung static IP address na isi-set mo sa lumang router ay naka-base dun. Suggestion ko, bili ka na lang ng Tenda na router, kasi may dynamic ip settings yun. Kahit ano pa mask ng provider, si tenda na bahala mag-adjust ng IP address nya. Kapag lumang router kasi kailangan mo i-set manually ang IP address ng lumang router. Di uubra kung pabago bago ka ng provider. Ito mga Tenda router reviews ko, check mo na lang: * Tenda AC1200 AC5 Setup & Unboxing - kzfaq.info/get/bejne/ladlkqyprKi2Y2g.html * Tenda F3 Router - Setup Via Phone & Unboxing - kzfaq.info/get/bejne/htigh6ydprTapZ8.html

@@ribbytrivia yun ang di tayo sure haha pero parang legal nmn cguro, may permit ata sila ng NTC, nagssponsor pa nga sila ng events sa city kung san yung main office nila eh. Tinry ko to sa globe modem, gumana nmn. Itong pldt router lng parang ayaw, tas after ko ma configure parang hirap nako mkakonek sa pldt router.

@@mejoradagerald Pag lumipat ka sa PLDT binabago mo din ang static IP ng lumang router? Ang PLDT dapat 192.168.1.XX

Kaya ng ano? Sorry di ako mind reader 😅 Ano ba gusto mong gawin? Libre naman mag-type dito... Pwede dagdagan ng impormasyon para mas malinaw 🤣 Gagamitin mo yung lumang router as a wireless repeater? Or may extra access point ka na tapos kokonektahan mo ng wireless repeater? Or tinatanong mo lanh kung papano at ano ang options for a wireless repeater? Or iba pa ibig mong sabihin?

​​@@ribbytrivia I think he meant those wireless repeater where said device connects to the main router without any cable. Anyway, would your tutorial work If my main router is Converge? Your superadmin credentials aren't working by the way, you should update your tutorial with these: Username: adminpldt Password: Mj5UI3OPr9vYq8bCxl1rV50E

@@swen_67 Thanks sa info. About wireless repeater option - not possible. It will work on any network. Kailangan mo lang sundin ang subnet mask nung source connection para yung static IP nya ay pasok sa IP ng source connection. Thanks sa new adminpldt account. Add ko sa video description.

Ok. Try nyo po kung gagana. Wag nyo idisable ang dhcp server at wag nyo gawing static ang IP Adress. Saksak nyo lang basta, tingnan nyo kung makaka-connect kayo

@@ribbytriviahahaha

@@aaarceee8651 Matatawa ka na lang talaga. 🤣😂😅

gumana po saken😅😅😅 using my old pldt prepaid lan to lan lang wala nmn aq binago sa settings magpapakahirap pa kayo, lakas pa ng signal😂😂😂😂😂

Kung napalitan na ang password dati, di sya narereset

@@ribbytriviaso ano dapat gawin

@@harold1212121 Kung di mo alam ang admin password (na nabago na dati)... wala ka na magagawa. Hanap ka na lang ng ibang lumang router. Or try mo search yung mga Tenda routers na ni-review ko. Mura lang yun at napakadaling i-setup.

As with other videos like this, para iwas attention from TelCo companies at possible issues, I decided to not put the passwords anywhere in the description. Di naman po ganun ka-hirap i-copy ang password. It will take just a tiny little effort to read and type-in each characters. As compared to the alternative na kapag napansin ng PLDT ang video at i-report, at ipa-take down... lahat pa tayo nawalan. Imbes na makatulong pa sa iba, mawala pa. Kaya ok na yang konting effort ng manually pag-type ng ilang characters lang naman. Di naman ganun kahirap yan.

Check the password list in the video description para ma-copy-paste mo na lang

Bili ka na lang ng mga bagong prepaid pldt home or globe home. Di na gumagana yan, sobrang luma na ng model na yan

Mahirap po magbigay ng exact steps kung wala sa aking yung mismong router, or same model ng router. Iba iba po kasi ang settings kada router. Pero same steps lang kung tutuusin: 1. Hard Reset old router 2. Disable DHCP ng old router 3. Set static IP ng old router based sa mask ng source router 4. Connect yung source router's LAN 1/2/3/4 to WLAN port ng old router via RJ45 (LAN Cable) Yun na. Ok na yun. Optional na palitan ang SSID at password ng old router

Ok... Sa libo libong nanood at gumawa nito, at nagpasalamt kasi gumagana sa kanila... Dahil di gumagana sa yo, ibig sabihin mali na? 🤣 Talk about being self-centered 😂 Pero honestly, malamang may nagbago na ng admin password ng router mo. Di narereset ang admin password.

Na reset ko na pag I copy ko Hindi pumasok eh . Labad na Yung head ko I stop ko nalg

@@ribbytrivia grabe ka naman boss, gusto lang namin matuto bat ganyan reply mo

@@testmode1751 Hahaha... Please read the whole conversation first. He immediately accused me na mali ang nilagay kong password. Yun ba yung sinasabi mong "gusto lang matuto"? Unang comment finger pointing agad. Respect begets respect. Don't play the victim card kung ikaw ang nagsimula ng hindi magandang conversation. I'm just replying the same way he commented.