Takes me back this does. As an old diesel injection mech who has probably overhauled and reconditioned thousands of those injectors; the cracking pressure should be 175 atmospheres if memory serves; around 2500 psi. The nozzles are the BDLL type that are very recondition-able with the right equipment.

I never knew I needed one of those till I saw you with one

Excellent - looks like a great piece of kit for the workshop!

Two new uploads in two weekend’s. Good to see you back Mr Fud all good stuff 👍

Handy bit of kit and an interesting way to apply L'eau de diesel!

I haven't seen one of them in action since about 1985 when l was at agricultural college. We were on a workshop day and the instructor was discussing injectors and the fuel system. He did a test on a good injector off some tractor or another and he demonstrated the power of diesel by a slow pump producing liquid diesel that didn't ignite on a naked flame as l held a burning piece of paper. He then did a quick pump to produce diesel vapour and the blast of flame was impressive. He also mentioned the danger of diesel mist under pressure on skin. None us had PPE and as far as l know, everyone is still alive today that was on that course with me. Interesting stuff young man!

An interesting little video and good to have you back 👍

Handy tool to have, if you have the need. Always nice to see what the spray pattern looks like. It is like reading spark plugs. Thanks for sharing

Its a very interesting tool.. it helps a lot when comes to test diesel injectors from our old tractors machines or cars.. i will send mine to the diesel shop i hope they let me see testing them!! Nice video!!

Thanks for another amazing video.

Great video and an interesting variety of results. Definitely worth the money, at least your decision on whether to buy a new set is an easy one now 😢

Interesting video. Thanks for showing us. 👍

Brilliant piece of kit hope you have entered his lordships competition hope it goes well for him good video 👍

Very interesting that video mr fud👍. Very surprised the man with the welder didn't try to fix them with a tack or two..🤣

Used to have a cav Lucas one on the service van years ago and do injector service on site those were the days and not a lap top or computer in sight lol great vid chap

Our old Landrover mechanic tested the injectors on my old 2-1/4 Diesel. the injectors sat in a trough so you could see the spray without getting splashed. His was a heavy duty beast. I want one but only have four diesels so might not use them enough. Good tool though.

We used to use a big pickle jar to test in you capture the fluid and can see the going’s on :) Nice little unit thanks for sharing :)😊

Great stuff Clarence, Well Wear, and don't tell anyone about this one😁👌👍🙂

Replaced the in injectors on my international D-179 3 cylinder recently after 40 years of use. Tractor was always hard starting in cold weather (indirect injection) no glow plugs. Existing units carried a return core charge. One of my better investments, tractor starts readily now even in the cold. Minimal exhaust smoke now.

Good tip for testing, thanks.

A chap I used to know had one which I 'borrowed' from time to time. He had an old aquarium tank that he had extended the pipe into - worked a treat, spray contained and cheap too.

its called leak-pressure, try putting a tall jar over/under the injector.

Can we put coffee through it ?

Is that hand wheel a bypass valve, or just a way to increment the pressure a bit at a time?

Like yourself I had one long time ago that went missing 🙄😟 very tempting to go and get one even though no use for it at the moment 😂 interesting video 👌

I just got this same tester and are testing injectors for my Massey Ferguson 85 with it.

How about clear tubing over the injector nozzle, terminated in a bucket of water, bucket to have a tight lid, small hole for the tube.

This reminds me, I must drop the injector tester you lent me sometime ago back off to you 😂

Looks great Mr Fud. Have you seen their hydraulic puller, I’ve been quite interested for no reason what so ever 😬

Can you also test electronic diesel injectors eith this tool? Should you ise a 12v battery with this pump for the test?

Gee.. I wish I'd known about this 40 years ago when I had a fancy car with injection and it had big costly unsolvable problems. I now figure it needed new injectors. I do tests on kit and have the same issue, to buy some specialist test equipment I might only use a few times. I sometimes buy old outdated kit that a modern workshop can't use.

Would be nice to see how a new injector preforms, just to compare

That’s a nice little tool to have in the workshop especially at that price👍. Are you any good at rebuilding them?

We all learn the hard way when it comes to lending tools to others, I don't do it anymore for that reason, I tell them yes I have said tool and no you can't have it unless you give me the cash equivalent of a new one as a deposit. Usually get told to go and do "something" to myself.

Thanks for posting Mr Fud. Now you have the tester can you rebuild the injectors rather than buying new ones?

What happens if it squirts out with no pressure build up

Where do the o rings go?

I wonder how will you repair the injectors. Good video

For my curiosity only, I’d be interested to know what the specs are supposed to be for the specific injectors you tested and if you were able to bring them into specs by adjusting the injectors. This might also help to verify the accuracy of the tester. Thank you for reviewing it as I’m considering getting one.

that last one has a sticky valve open it up and give her a clean normally carbon, the other ones should clean up aswell

first injector shows 50 secounds of no pressure loss at all. so the inside is full of carbon or something the book say bewteen 5-40 sec to a certian pressure its good

Have you purchased you tickets for the Mucker raffle ❓

I get a similar experience in the loo sometimes. It must be an age thing...

Sir . Price -?

I hope your Mr’s doesn’t mind the smell of diesel cross contaminating from your overall sleeves to anything else that goes in the washing machine for the next couple of loads! Cheers anyway.

now you have crack tester you could rebuild with new nozzle kit

I did that 1 time and started farting black smoke lol.

Well that's at least twice you'll use it, now and when you've rebuilt them.

This video is very misleading. VERY DANGEROUS to spray this into the atmosphere you should, at the very least put the injector into a bottle.