Quick Tip: CV Axle Stuck

No video

Quick Tip: CV Axle Stuck - FIXED!

Рет қаралды 73,102

4 жыл бұрын

Sometimes when you go to pull out a cv axle, the diff side may get stuck! I figured out this quick tip to help you if you get in this situation. There may be other ways of doing this, but this worked best for me and I hope it helps you as well!
➤Parts For Your Make & Model: bit.ly/2I5Xndi
• Polaris: bit.ly/31kAevq
• Can-Am: bit.ly/2IAH338
• Yamaha: bit.ly/2ZhrrIO
• Honda: bit.ly/2KzVt6k
• Textron: bit.ly/2KDX6zU
➤Geiser Performance: bit.ly/2KEvEly
➤KC HiLites: bit.ly/2Iyxp0Y
➤ZRP Products: bit.ly/2KDThLh
➤Method Race Wheels: bit.ly/2KDOadZ
➤MudBusters: bit.ly/2KDWXwm
➤PRP Seats: bit.ly/2WvTUc8
➤Assault Industries: bit.ly/2QWUiiw
➤EVO Powersports: bit.ly/2WqrLTB
➤Social:
IG: / utvsource
FB: / utvsource
#utvsource #canamx3 #utv

Пікірлер: 25

@glenpetersen4419 3 жыл бұрын

Thx for posting this! Your technique did the job for my 2013 Can Am Commander 1000 when everything else I tried failed. It was especially helpful showing how much force was needed to pop it loose. I had to use my High Lift jack as a lever though on my machine bc the A Arms are configured differently. It wasn't pretty cranking on that $#@% thing with A LOT more force than I ever thought necessary but it finally came loose. Glad to see other people improvising a way to get a job done.

@plaman 3 жыл бұрын

Thanks for sharing this! I used the technique tonight on my 88 TRX300FW and it worked perfectly! Awesome!

@JDMooney Ай бұрын

This worked really well. We had the exact issue and this popped it right out!

@DrainoDraino 4 жыл бұрын

Thanks man. This worked beautifully of my bruteforce despite my doubts.

@brianbourgeois7851 4 жыл бұрын

It actually works, Thank You!!!!! I was so in a bad way, this trick saved the day👍 Awesome

@phar2slor3cpilot55 4 жыл бұрын

Sweet I had weeks of trying to get the hub off only to spending the last week trying to get the alxe out will do this tomorrow night. Cheers

@rttrippin 6 ай бұрын

Thanks. Might have to try that racheting strap around a wheel hub and attached to the frame underneath. The control arm on a Caliber doesn't have the range of motion.

@osborneready 3 жыл бұрын

Made my life easy!! Thanks brother

@zaneturner8423 4 жыл бұрын

We've had them stick before too, but now we use lots of anti seize on them and we don't have any problems with them coming out.

@jimmyyancey1907 6 ай бұрын

You’re a genius!! I tried everything 2 days work bought pullers and tools nothing worked!! Seen this video and 10 minutes later it was out

@UTVSource 6 ай бұрын

Right on!!! Glad it worked out.

@princessisabella6497 3 жыл бұрын

It did work after I adjust the strap in the right position!

@bradmitchell6505 3 жыл бұрын

worked good.but took a few tries the strap kept falling off.i had to hold down the bottom a-arm with the strap tight then give a tug on the axle also.

@johnbaker-oq9xz Жыл бұрын

Best I seen so far that was great

@TinyEmmesfordracing Жыл бұрын

Thank-you I just did that after a hour of hammering and prying

@Tater-co3pw 11 ай бұрын

My rear axles are both stuck in the differentualwe have tried pullers chains every thing we can think of they won't come out

@deniswiesner2285 2 жыл бұрын

Hope it works on my talon thanks again

@brianaltmeyer846 3 жыл бұрын

Thank you! You saved my ass some time.

@GallagherRC 4 жыл бұрын

So I had this happen to me on my rzr in the front on both shafts. When I get them out of the diff are my axles now junk? Or can I put them back together?

@kimomasterson 3 жыл бұрын

I have the same question. What did you figure out?

@joshuahurst868 3 жыл бұрын

Same Question

@deniswiesner2285 2 жыл бұрын

Thanks

@cherylcroto36 2 жыл бұрын

How do you do the rear if it it’s stuck