V8 e30 Gets Much Needed e46 M3 Steering Upgrade!

  Рет қаралды 2,195

DBO

DBO

Күн бұрын

Well, that was sketchy, after driving back from Boulder with little to no steering, it was time for a long overdue refresh. Check it out! Also this thing has broken down again (2 days later) so expect some more content soon!
Make sure you like, comment & subscribe if you're with it!
Bonus Content & More!
/ denverandbeeroil
Follow The Team On Instagram!
@DenverBeerAndOil
@DBOChris
@DBO_Murdo
@LounsberryFab
@HamDoesThing
@SlowEuros

Пікірлер: 18
@REALSHYT666
@REALSHYT666 3 жыл бұрын
Good stuff Sir Hamlet
@isuavingalaff
@isuavingalaff 3 жыл бұрын
hello from the uk.. great vid...
@psavel274
@psavel274 3 жыл бұрын
Gotta love the sound of a decent exhaust on an m60. The X-pipe is key on the v8's especially to take advantage of the scavenging, and the resonators to get rid of the rasp. Glad its mandrel bent as well. Good shit dude. Steering wheels are such an overlooked 'mod.' Its the difference from a nice sharp quick lock to lock vs. the 'driving a bus' feel. I like the looks of the steering shaft. I used to swap out the donut for a poly or aluminum bushing, but that piece takes it to whole other level. Its a good upgrade to steering feel, and frankly I'm surprised more people dont do it. You can do a pretty damn close "toe-n-go" ghetto alignment with some strings and homemade toe plates or levels. I've been able to get a 'close enough' result about 99% of the time. You can at least get it tolerable enough to drive for awhile or until you decide to put it on the rack. Your hair gets crazy everytime you're working on the car, and then when you finish the job it seems to tame itself back down. It makes me think "mad scientist" kinda. LMFAO just messing dude, excellent work, and thank you for sharing this as always broski!!! ☺️
@DENVERBEERANDOIL
@DENVERBEERANDOIL 3 жыл бұрын
I love the part about Hamish hair!
@psavel274
@psavel274 3 жыл бұрын
@@DENVERBEERANDOIL Lmao coin that phrase: "Hamish Hair!!!" Lolol when you guys gonna do a live feed again? Its pretty entertaining
@DENVERBEERANDOIL
@DENVERBEERANDOIL 3 жыл бұрын
I'm thinking soon, but we'll announce it a couple days in advance.
@ernestoguzman7460
@ernestoguzman7460 3 жыл бұрын
Quick question how hard is it to swap in M60b40 into a e36??
@petrieblignaut7473
@petrieblignaut7473 3 жыл бұрын
Halo DBO im messaging from south africa, want to ask some advise mu e30 318i tachometer section suddenly stoped working but seems to still get a spike of power when i switch my ignition off after driving can you help with some advise as to where the problem could be? Kind regards
@lightbulb002
@lightbulb002 3 жыл бұрын
Ham, what resonators are you running?
@DENVERBEERANDOIL
@DENVERBEERANDOIL 3 жыл бұрын
They're the flowmaster fx series, not sure other than that, the local exhaust shop recommended them! Pretty solid but a smidge droney
@bullethelldemon
@bullethelldemon 3 жыл бұрын
is the late model steering column a pain to pull? i might have to pull mine because my splines are fucked up on it so my momo hub is basically seized onto it. think i would try to put an early model one back in tho for ease of install. im afraid when i pull the hub off it'll fuck the spines up to the point where it'll no longer hold the wheel in place.
@DENVERBEERANDOIL
@DENVERBEERANDOIL 3 жыл бұрын
I don't think either were too bad to pull, if it hasn't been pulled before though they're a little seized on the top 'slider' bolts. I had to hammer it out after loosening the 13mm clamp at the firewall and the 13s on the firewall itself... The early and late model column have a different 'base' though so the bolts holing it to the firewall won't line up, I did a sketchy there, hmu on insta @hamdoesthing and I'll help you out with pics when you get around to it
@bullethelldemon
@bullethelldemon 3 жыл бұрын
@@DENVERBEERANDOIL awesome, good to know. thanks hamish! hoping the next time i pull the hub it'll just slide back on again without too much issue but it's something i'll probly tackle this year.
@DENVERBEERANDOIL
@DENVERBEERANDOIL 3 жыл бұрын
No worries! Iirc the splines might be different on the columns as well, or steering wheel spacing, but either way if your hub is aluminum it'll give up before the column will
@bullethelldemon
@bullethelldemon 3 жыл бұрын
@@DENVERBEERANDOIL yeah the momo hub i got with the car was seized on and when i pulled it off (took like a straight our of yanking on it) it took out like.. some chunks horizontally against the 'grain' of the splines on the shaft. the hub was ruined so i got a new one which is also seized onto it just bc i needed it to drive bc it's my daily
@sunfish9341
@sunfish9341 3 жыл бұрын
does this work on blue cars too?
@DENVERBEERANDOIL
@DENVERBEERANDOIL 3 жыл бұрын
What uhhhhh what do uhh do you mean
@joegermaine4208
@joegermaine4208 3 жыл бұрын
No.1 comment gang
I Broke Down AGAIN | V8 E30 Garagistic Gauge Install
12:22
Smart Sigma Kid #funny #sigma #comedy
00:25
CRAZY GREAPA
Рет қаралды 11 МЛН
Always be more smart #shorts
00:32
Jin and Hattie
Рет қаралды 43 МЛН
When You Get Ran Over By A Car...
00:15
Jojo Sim
Рет қаралды 12 МЛН
E30 PAINT REVEAL!!
12:32
Static Garage
Рет қаралды 12 М.
Where Have I Been?
10:47
DBO
Рет қаралды 2,2 М.
Suspension Geometry - Part 1 (Camber, Toe, Caster, KPI, Scrub Radius)
18:53
Black e21 BMW race car 8000rpm 2.7 atmo m20b27 stroker
8:48
RHD Racing
Рет қаралды 31 М.
Manual Transmission Operation
24:04
WeberAuto
Рет қаралды 10 МЛН
If You Understand Volumetric Efficiency You Understand Engines
16:45
driving 4 answers
Рет қаралды 792 М.
Wilwood Pedal Assembly Install | M60 E30 Pt 4
9:51
DBO
Рет қаралды 2,8 М.
Kad se neko ispred tebe ubaci i zauzme parking mesto 😀
0:21
AutoRS Test
Рет қаралды 16 МЛН