V8 Rolls Royce Engine Cut in Half with 60,000 PSI Waterjet

No video

V8 Rolls Royce Engine Cut in Half with 60,000 PSI Waterjet

Рет қаралды 123,453

4 жыл бұрын

We have known Lewis for a while and you've seen him in the Haircut video and the Compressed air video, and maybe a few others. Take a look at his channel here... / @lewisfausettmanagement
His Rolls Royce engine swap project sounds pretty cool, go give him a follow and see the progress.
Don't forget to subscribe to Lewis, I really want him to get into the tank in a speedo.
We love our fans, and if you want to show love back you can do one of these things.
Waterjet Knife blanks... waterjetknives...
Copper Touch Tool to avoid Poop... thecopperfinge...
Shirts and Hoodies .... teespring.com/...
Are you or anyone you know going through a divorce? If so, i'm sorry to hear about it, but we'd love to help divide the assets.
Music: David Cutter Music - www.davidcutter...
Don’t steal our videos, if you’d like to use our video for something please contact us via email.

Пікірлер: 385

@scuzzjumper 4 жыл бұрын

Speaking as an old Rolls mechanic here in America, I can tell you that you have a lot of good parts there.

@LewisFausettManagement 3 жыл бұрын

Do you want them? Patrick is going to make a table out of the block, but if there's something specific you want off of it dm me. (Tho I'm sure most of the parts are garbage now . . . :) )

@purpledragon372 4 жыл бұрын

"need a specific wrench" you have a water-jet, just cut out your own wrench

@LewisFausettManagement 4 жыл бұрын

This was my comment to every difficulty we had. . . "Can't we just pivot the head and cut this?" Apparently "No" is almost always the answer.

@purpledragon372 4 жыл бұрын

@@LewisFausettManagement I don't want to be the weird person that's overly exited for comments, but I have to say that this is the first time that I have gotten a response from someone in the video. Although it's not the channel of the original video, this is cool and i'm not complaining. So not trying to be weird but, thanks for responding, it's cool that you did!

@joemama7236 4 жыл бұрын

@@purpledragon372 hey man I was ur 30th like congrats

@Youngbl33zy 3 жыл бұрын

Theres not enough brain power there

@djfluffy4822 3 жыл бұрын

Agreed

@JamesContos85 4 жыл бұрын

Lewis is gonna wake up tomorrow with like 15K new subs overnight. Patrick better up his game lol

@LewisFausettManagement 4 жыл бұрын

I know some of the videos he has planned. My work is going to be cut out for me

@dickdastardly4236 4 жыл бұрын

And probably a lot of death threats. People are stupid like that.

@LewisFausettManagement 3 жыл бұрын

@@dickdastardly4236 Ive gotten 0 death threats. It's actually making me feel a little left out. . .

@scrapyardmechanics7519 3 жыл бұрын

@@LewisFausettManagement LOL

@erlendse 4 жыл бұрын

Could you cut open a sparkplug? As far as I have seen mentioned, they have apparently a complex layering of various materials in order to get a seal from ceramics to steel.

@LewisFausettManagement 4 жыл бұрын

I'd enjoy seeing this.

@cncgeneral 4 жыл бұрын

I'd also like to see this, different temperature ranges would be good to see, hotter plugs should look very different inside to colder ones

@chubbysumo2230 4 жыл бұрын

the ceramic would not survive, nor would you be able to see the layers.

@BobMonkeypimp 4 жыл бұрын

@@cncgeneral Nah, they'd look the same. It's mainly the spark gap that affects plug temps.

@SamSamuylik 4 жыл бұрын

I have broken open a spark plug before and I did not see layers, just a metal electrode going all the way down the center. But it was just a simple moped spark plug. May be different in some Bosch BMW plug

@hyper6500 4 жыл бұрын

How to make a V8 into an inline 4!

@kiesi69 4 жыл бұрын

Yes an you can make 2 engines out of 1😁

@kiesi69 4 жыл бұрын

@@LordPrecision boe u genius!

@nathanielweaver7078 4 жыл бұрын

The Pontiac Tempest had a 4 cylinder that was basically the left half of their v8

@LewisFausettManagement 4 жыл бұрын

We're just trying to save weight for the next track day. . . .

@TbsDltn 2 жыл бұрын

smart!

@Oddman1980 4 жыл бұрын

Those are constant velocity carbs. You see them on motorcycles a lot. The butterfly valve is controlled by the throttle cable, the round slide is controlled by vacuum.

@alisdairherd9501 4 жыл бұрын

There is a tapered needle that seats in a fuel orifice that's in the path of the intake. The fast moving air creates a vacuum in the space in the bell above the round slide, sucking it up away from the fuel orifice. As the needle is tapered the more it is withdrawn the more fuel is allowed into the intake airstream.

@LewisFausettManagement 3 жыл бұрын

@@alisdairherd9501 See this is why we need someone like you able to facetime in and explain what we don't know. . . .

@LewisFausettManagement 3 жыл бұрын

That's really cool. We were trying to figure out how it worked

@electronicsNmore 4 жыл бұрын

Great video guys! Many YT channels experiencing a big crash of views. Good ole YT must've changed the algorithm once again.

@audiodood 4 жыл бұрын

yup

@Arte550 4 жыл бұрын

Waterjet Channel: sees something too big to cut with their actualwaterjet We need a bigger waterjet

@LewisFausettManagement 4 жыл бұрын

We should start a go fund me

@RNCHFND 4 жыл бұрын

Didn't they get a twisty blue type some months ago?

@LewisFausettManagement 3 жыл бұрын

@@RNCHFND This is the blue one. It's just really dirty now

@SentinalSlice 4 жыл бұрын

It’s like My Summer Car, but in reverse.

@snikwad003 4 жыл бұрын

A supra with a rolls v8?

@LewisFausettManagement 3 жыл бұрын

@@snikwad003 I need to see that

@beforebefore 4 жыл бұрын

Intake manifolds don't need "cooling"... they use the engine heat to pre-heat the intake charge when it's cold weather. Heated intake charge also improved MPG and exhaust emissions.

@svetko05 4 жыл бұрын

For mpg and emissions, yes, but who cares about that? If you want power colder intake temperatures are the way to go.

@beforebefore 4 жыл бұрын

@@svetko05 Agreed that cooler intake charge means more density, but you can't get cooler intake charge by cooling with the engine coolant system. BTW, I totally disagree about disrespecting the only environment we have... that's like intentionally pouring poison in the water you drink. Others have to have a liveable environment after you're through with it!

@Arsopu 4 жыл бұрын

I wanna see that 2jz swap when it’s done.

@LewisFausettManagement 4 жыл бұрын

We're about 60 days out, and doing updates every week! You should come check it out. We're hoping to get it out to some car shows around the country once this whole Panddemic thing is over.

@thomasherzog86 4 жыл бұрын

0:29 little did he know, she did watch it and her anger about his spoof was phenomenal.

@LewisFausettManagement 3 жыл бұрын

Shhh we still haven't been caught yet

@SilasHumphreys 4 жыл бұрын

Those SU carbs are some kind of black magic.

@LewisFausettManagement 4 жыл бұрын

It's official Rolls Royce is ran by witches

@user-wr6wo6vr8r 4 жыл бұрын

Make sure you completely dry it before putting it all back together so it won’t hydrolock 😂

@tonyhawk5608 4 жыл бұрын

Head studs from factory.. hell yeah

@LewisFausettManagement 3 жыл бұрын

Will you teach me how to kick flip?

@tonyhawk5608 3 жыл бұрын

@@LewisFausettManagement yes flip the skateboard up vertical.. then sit on it

@craftcakesam793 4 жыл бұрын

That is the fastest I have ever been motivated to subscribe to someone

@LewisFausettManagement 4 жыл бұрын

I have a feeling Pain will be in my future. . .

@jasepoag8930 4 жыл бұрын

I don't know enough about old carbed engines, but either the slidey bit or the butterfly is the choke, while the other is throttle. I'm guessing the slider is choke since I don't see where the throttle cable would connect.

@LewisFausettManagement 4 жыл бұрын

Yeah I have an old engine manual on my computer. I should have studied it before we filmed, but I mean, where's the fun in that?

@onehellcat6493 4 жыл бұрын

A 2jz swapped rolls Royce, now that’s a crazy swap 😂

@LewisFausettManagement 4 жыл бұрын

That's the goal. I want it to be the stupidest but coolest car. I think i'm on the right track

@thomasjohannesen1003 4 жыл бұрын

The algorithm apparently didn't like this video. Weird. I am subbed with notifications and didn't see this video until 2 days after it posted.

@beastman.330 3 жыл бұрын

Shocking how powerful water is.

@axeljacobs9723 3 жыл бұрын

So painful as a RR collector to see these young Ignoramus‘ chaps absolutely destroy this RR engine!😭😩😭😩

@yambo59 4 ай бұрын

NO KIDDING - so many would love to have a rebuildable block or crank etc.

@vaheakli4551 4 жыл бұрын

This should be new top viewed video ;)

@LewisFausettManagement 3 жыл бұрын

Watch it more plz. I've got bills to pay

@unsmoothOperator 4 жыл бұрын

Poor rolls royce, it didn't deserved that :(

@LewisFausettManagement 4 жыл бұрын

Don't worry. He's going to come back better than ever. . .

@colchronic 4 жыл бұрын

@@LewisFausettManagement did you just assume the rolls' gender

@damirzanne 5 ай бұрын

@@colchronicCharles Rolls and Henry Royce were founders , so I’m pretty sure it’s a male gender

@colchronic 5 ай бұрын

@@damirzanne woooshh

@DavidChadwell 4 жыл бұрын

Putting a Toyota motor in a vintage Rolls Royce is blasphemy.

@aterack833 4 жыл бұрын

David Chadwell I’m gonna put a rr mustang engine in a Toyota supra now just to spite these guys

@wdwerker 4 жыл бұрын

There is a Tesla powered Rolls Royce ! Is that blasphemy? What about the ICON Derelict V8 race motor Rolls conversion ? They basically built a street rod chassis that perfectly fit under a Rolls body.

@renedog23 4 жыл бұрын

That engine would be cool to have for demonstrations

@LewisFausettManagement 3 жыл бұрын

Yeah we're going to turn it into a table we think

@darpsy9808 4 жыл бұрын

What happened to the lick test intern??

@colinnielson7996 4 жыл бұрын

That’s a good question

@midesti 4 жыл бұрын

Yeah, what was that guy's name again?

@AyatollahS9430 4 жыл бұрын

Awe man, of all the engines out there! Why? Why?

@orangesv356 3 жыл бұрын

It was probably old and didn’t work anymore

@adilhamdaoui5632 4 жыл бұрын

"Why you left handed" lol

@MikeOrkid 4 жыл бұрын

Did Westshop give up on doing videos?

@vanamutt43 4 жыл бұрын

waterjet is the new hydraulic press

@him110222 4 жыл бұрын

That "disassembly" hurt to watch

@LewisFausettManagement 4 жыл бұрын

Trust me, it hurt to be a part of.

@maheshbabu552 3 жыл бұрын

That title got me!!

@spiritdox9774 4 жыл бұрын

3:00 is when the cutting starts, for ya heathens who cant wait

@dawsonSTT 2 жыл бұрын

That big round cylinder in the intake is the diaphragm.

@thomasjohannesen1003 4 жыл бұрын

SOMEBODY NEEDS TO BUY THE BURLACHER'S ROLLS LIMO

@LewisFausettManagement 3 жыл бұрын

I'm seriously considering buying it and turning the inside into a mobile office, but I think my wife will actually murder me. . .

@simpons1997 4 жыл бұрын

That plunger in the carb is vacuum operated by the opposite carb. Essential letting the carbs run the exact same without needing to constantly tune and tweak them.

@DanielWillems1995 4 жыл бұрын

Now you guys can come up with a new product to ship out, DIY reassamble an engine. Meccano for legends

@samstermotorizedbikes 4 жыл бұрын

You guys aren't the best mechanics but you sure are great at content!

@LewisFausettManagement 4 жыл бұрын

I thought they were alright. I mean my engine is definitely worse than when I took it to them, but atleast now we know what's wrong with it.

@timmyb8353 4 жыл бұрын

2 sentence writing prompt gold in this one. "... and that's more than 8 inches why do you have bolt cutters?"

@sparkplug1018 4 жыл бұрын

If you think getting those heads off is a royal pain, try getting the heads off a Jaguar V12. Same issue of the studs binding in the head, its just 2 more cylinders of fun.

@rmgxgreenup-1417 3 жыл бұрын

Wow insane on 100k views!!!!!!????? As soon as i saw this it was the most eye popping title to me

@sicurius0512 4 жыл бұрын

You make me sick doing that😭

@imthedarknight-8755 4 жыл бұрын

That engine had problems, it shouldn't be that difficult to turn the crank especially with half the valves missing

@LewisFausettManagement 4 жыл бұрын

I honestly think it turned out cooler this way. This car was actually produced at a decent volume and now there's a cross-section of the engine back at the dealership, and we get to make a very cool car.

@LewisFausettManagement 4 жыл бұрын

So I know one of the issues was it needed new carburetors. The thing is, you can get one of these engines working for ~$6,000 USD on ebay. There's not a shortage of them by any means. We just were going to junk it but thought this was a better use.

@fullraph 4 жыл бұрын

It's just a shitty pushrod V8 with twin single barrel carbs... 6.7L and probably put out less than 200hp. Also it's not even rare. At least the car get to live again with a new heart.

@chubbysumo2230 4 жыл бұрын

@@LewisFausettManagement clean it up, all of it. Put the parts in a parts cleaner, get it nice and clean, paint it nice, and display it. That could look like a really cool display or show piece. Get a nice gear-reduced crank on it too, so people can turn it!

@tracybowling97 4 жыл бұрын

Ugh! Seems like a lot of work! Good job boys!

@WaterjetChannel 4 жыл бұрын

it was a lot of work, thank you for noticing

@JessicaMarinaRushie 4 жыл бұрын

That engine is bigger than my house!

@thomasherzog86 4 жыл бұрын

it might be more expensive. no idea what it costs, but it sure looks like 500k plus which is more than my house for sure.

@CerealMagic 4 жыл бұрын

That disassembly hurt my soul.

@LewisFausettManagement 3 жыл бұрын

It hurt my pride

@923JL923 4 жыл бұрын

You should drained the tank to make enough space and lowered it in lads

@LewisFausettManagement 4 жыл бұрын

I think this is a great idea, and I'm going to file a complaint with my supervisor because I want those hours of my life back

@923JL923 4 жыл бұрын

@@LewisFausettManagement do it my man 😂

@thomasjohannesen1003 4 жыл бұрын

I doubt the water jet would stay that focused all the way down, though

@ivancounsell4077 Жыл бұрын

Best thing you could do for that engine.

@chubbysumo2230 4 жыл бұрын

this is a really cool piece, and you should put all the engine parts in a parts cleaner, and clean them up, and display them after painting stuff nice!

@LewisFausettManagement 4 жыл бұрын

I took it to the dealership and I'm hoping they'll do this and put it in their show room. I think it's a pretty cool little display. I live in a small condo or I'd try to display it somewhere there

@jackrogersjr.4014 4 жыл бұрын

No joke when I was 4 I asked my dad a very skilled mechanic what the governor was on my four wheeler and he fed me that story and I think I believed it until I was 7. It was more like why can’t I go as fast as you?????

@philb8186 4 жыл бұрын

2:06 I almost lost an eye using a sawzall exactly like that.. Be careful man

@LewisFausettManagement 3 жыл бұрын

We're really just trying to speed up darwinism around here

@johnnykirk1501 4 жыл бұрын

You actually know what you're talking about on this one!

@johnnykirk1501 4 жыл бұрын

Delivered the same as when its being made up lols

@colchronic 4 жыл бұрын

It might as well be seized up, it should be a lot easier to turn without the heads on

@LewisFausettManagement 3 жыл бұрын

Yeah it definitely hasn't run for ~4 years. So somethings wrong. The solution to not engine swap it was a rebuild which is about $3K

@camflies9105 4 жыл бұрын

That plunger stick thingy is a choke mechanism.

@bubbajfpv8856 4 жыл бұрын

I know that yall usually have unconventional ways of disassembling things but I have never seen someone use a reciprocating saw to take apart an engine.

@LewisFausettManagement 3 жыл бұрын

It's like my dad always said "If it ain't broke, we'll break it"

@bubbajfpv8856 3 жыл бұрын

@@LewisFausettManagement haha

@TrojanHorse1959 4 жыл бұрын

Great video guys, thank you! P.S. I think you may have engendered some mechanical butthurt with this video...Lol!

@LewisFausettManagement 4 жыл бұрын

I think if there's one thing we're good at its making people triggered. . . .

@TrojanHorse1959 4 жыл бұрын

@@LewisFausettManagement, Keep on doing it Lewis, it's hilarious!

@BobMonkeypimp 4 жыл бұрын

I think they've cut Stepdad Barnes into little pieces with the waterjet. No sign of him.

@sinom_00 4 жыл бұрын

And didnt make a video about it???

@BobMonkeypimp 4 жыл бұрын

@@sinom_00 I think it was only for Patreons.

@rockonmyfriend 4 жыл бұрын

Now, this is some content.

@LewisFausettManagement 4 жыл бұрын

I'm glad you enjoyed it!

@shaggymeme1268 4 жыл бұрын

Who else thought they were gonna cut the whole engine in half 😢

@LewisFausettManagement 3 жыл бұрын

We hoped so, but alas it was too big

@knumbtummy 4 жыл бұрын

I have a 2jz engine that ill sell to him!!!

@09mxrider 4 жыл бұрын

That's is not a government of the engine its called a constant velocity carburetor and it works off vaccume . once the vaccume is achieved it forces that slide and needle valve up and balances the barometric intake pressures making the engine run more efficiently...

@msnapp169 4 жыл бұрын

Yall just cut 40k in half smfh that engine is rare and could have been sold

@ronniewilliz153 4 жыл бұрын

That's what i said why tho makes no sense u bet they won't get any where near that of views

@BobMonkeypimp 4 жыл бұрын

It's their engine & they can do what they want with it.

@blockstacker5614 4 жыл бұрын

it was already ruined

@ronniewilliz153 4 жыл бұрын

@@BobMonkeypimp an we can also ? Why. Lol so ha

@ronniewilliz153 4 жыл бұрын

@BladeCast lol ok dude what ever helps u sleep at night.

@Lectr43 4 жыл бұрын

They could try to remove the slabs, scoop out some sand and water, place the big object under the jet and cut

@LewisFausettManagement 4 жыл бұрын

I'm going to text Mitchell and ask why we've never considered this. I'm sure there's a real answer, but I'm with you

@USUKallday 3 жыл бұрын

A 2j swapped rolls lol gotta see it

@Trackur 4 жыл бұрын

Hey so are you guys still on the clock while you're doing all this?

@LewisFausettManagement 3 жыл бұрын

They own the waterjet and it's solely a KZfaq waterjet. I'm on the clock for my day job usually when I'm in videos dropping stuff off to Craig (I also happen to be an owner in my day job so it's pretty hard to fire me)

@sinom_00 4 жыл бұрын

How come I didn't see you using the Waterjet Channel Limited Edition Kid-Tested Mother Approved Astronaut Endorsed Ultra Lightweight Aerospace Grade Titanium Bottle Opener 10mm Wrench Multi-tool Keychain to get the engine apart? Can't it do everything???

@LewisFausettManagement 4 жыл бұрын

I think they must have lied to us. . . .

@Turkey1267 4 жыл бұрын

I immediately thought Lewis and Pat were related

@xishootstuffx 4 жыл бұрын

That government part is the slide and it's connected to the metering rod.

@LewisFausettManagement 4 жыл бұрын

But what is the metering rod connected too?

@elongatedcarp6309 2 жыл бұрын

It's been over a year but I'm still hoping his channel gets to 9k so I can see someone swim in the jet-pool

@redsquirrelftw 4 жыл бұрын

Put the engine back in the car and try to bring it in for service. "My car is doing a weird noise any time I use the wipers. Oh, and it won't start."

@blown572hemi Жыл бұрын

Studded head's? Port's ondy intake looked sweet too. Think I would've put a hairdryer on that engine instead of a 2jz. Procharged big block chevrolet would've been more unique and way more power for less

@cu3tom_xd149 4 жыл бұрын

I was waiting for you to do this. Finally :)

@LewisFausettManagement 4 жыл бұрын

I'm glad you liked it!

@jordanbryant1163 4 жыл бұрын

4 rotor swap it

@davidjames2788 4 жыл бұрын

Collectors are shitting their pants right now LoL.

@notold37 4 жыл бұрын

Hey men, were is the WESTSHOP boys to help you with the engine pull down, great video 👍🏻👍🏻👍🏻👍🏻🇦🇺🇦🇺🇦🇺🇦🇺🦘🦘🦘🦘

@straighttothepoint2717 2 жыл бұрын

Hard to find parts for RR stuff especially when it's old

@mannycaballero4370 4 жыл бұрын

So if Lewis is powering the engine, then it is 1 LP. 1 LEWIS POWER. NO 1 HORSE POWER.?

@medixforchune9958 3 жыл бұрын

Needle valve and float

@charliesuroski2060 4 жыл бұрын

Waterjet channel can I possibly have the valve cover off of y’all? If so please reply and we can swap info and I’ll pay for shipping

@LewisFausettManagement 3 жыл бұрын

I've got the valve covers in the back of my truck. Let's make a deal

@_unc_5 4 жыл бұрын

Who’s here before this blows up?

@LewisFausettManagement 4 жыл бұрын

I am

@SilverBlaze189sb189 4 жыл бұрын

I was hoping y'all were gonna cut an RB211 Jet Engine...

@calebweems9392 4 жыл бұрын

This makes me sad :(

@corym4071 3 жыл бұрын

Could you get clear resin to fill every crevice and then cut?

@KingNast 4 жыл бұрын

Does that thing have sodium filled valves? If so, it would be quite interesting if you cut them

@TheMoody876 4 жыл бұрын

That engine was actually worth a ton of money very sought-after in the racing world

@LewisFausettManagement 3 жыл бұрын

How much money? I"ll sell you mine for 50% off

@I-am-not-a-number 4 жыл бұрын

Oh my God, it's a 2JZ Roller.

@LewisFausettManagement 4 жыл бұрын

That's the goal. We're thinking about calling it the RRZ (2RZ ;) )

@robertovargas3205 4 жыл бұрын

Ya, more car parts!!

@LewisFausettManagement 4 жыл бұрын

I've got access to a plethora of car parts if they ever need more. . .

@robburdack4361 4 жыл бұрын

vacuum draws up the piston lifting the needle allowing fuel to flow in the carby section

@LewisFausettManagement 4 жыл бұрын

See this is the kind of insight we needed.

@robburdack4361 4 жыл бұрын

@@LewisFausettManagement as a mechanic that has owned 2 shops and a mobile mechanic business ...if i dont know its probably since i closed up shop due to failing health but in gen most things aside of electronics have not changed since the beginning of internal combustion engines

@bobbyfisher6342 4 жыл бұрын

Can you do big rolls of papers

@tomspotley5733 4 жыл бұрын

That is classic Lewis.

@LewisFausettManagement 4 жыл бұрын

He's pretty dumb. . . .don't tell him I said that tho

@aland7236 3 жыл бұрын

I can't tell if this dude was joking when he said that the Audi R8 was an issue so he went to look at Porsche Panamera instead like that was normal, "let's get a car" talk.

@mybackhurts7020 4 жыл бұрын

Bet you he’ll do the LS swap Cheaper and easier to find

@LewisFausettManagement 4 жыл бұрын

I'm heavily leaning towards the 2JZ. Next week I'm test-driving a C10 with an LS3 and a 2JZ GTE Supra to see which I like better. The big thing is that the LS has been done before where the 2JZ would give us a much more unique build, and I like doing weird unique things. I have a source for both so getting the engines isn't the hard part.

@DefconMaster 4 жыл бұрын

@@LewisFausettManagement definitely go with the 2JZ. Nothing against the LS, they're great motors with excellent bang for your buck, but these days they're basically the default engine swap option. The 2JZ would have a lot more character!