🚲 V9.0 Full Build (TL;DW) In 20 Minutes! - 4 Months of Work! \\ Enduro

🚲 V9.0 Full Build (TL;DW) In 20 Minutes! - 4 Months of Work! \\ Enduro - DIY Build! \\ QS273 70Ah

Рет қаралды 14,110

$High Tech \\ Low Life$

Күн бұрын

The TL;DW (too long, didn't watch) version of my entire e-bike V9.0 build in 20 minutes! This is 4 months of work squeezed into one video.
If you want to see the entire build series where I explain and go over everything, please watch it here: • 🚲 Custom 18KW [60MPH] ...
Ok so this is my 2nd ebike that I put away for a few years because I used some of the parts to make my 3rd ebike which you guys can check out here: • 🚲 Custom 5000W Digi-Ca...
This is it guys, the moment I have been waiting for - the finale!
It was a long journey, and thanks so much for following along with me.
This this is an absolute beast of a bike, the acceleration is such an amazing rush, it's exhilarating - completely! This amount of power is absolutely overkill but it is oh so fun. I did do some speed runs and hit 60MPH, which I was a bit surprised because with this power it should go a bit faster, but I don't think it's the power that is limiting it, I did try to troubleshoot things that could be affecting the top end, but couldn't come up with anything so far. It's still way too fast and extremely dangerous to go this fast, but for science I do want to maybe see if I can push it a bit more.
I couldn't be happier with how this came out, the power, the speed, the aesthetics, the battery size - I didn't even go over the range in the video, it should go easily 60 miles, probably more!
Thank you guys for watching, I have more projects coming up - stay tuned!!
------------------------------------------------------------------------------------------
⛧ \\ Table of Contents: \\ ⛧
00:00 - BUILD!
15:33 - RIDE!
------------------------------------------------------------------------------------------
⛧ \\ Insta: / htll_official
Please send me memes and anything cyberpunk/tech/dystopian related
⛧ \\ Music: XYFΞRΞX - / @xyferex8748
If you make any synthwave/dark/cyberpunk music yourself and would like it featured on the channel please send it to me!
⛧ \\ Merch: shop.spreadshirt.com/indstrkt
Please only buy something if you really like the designs! If you do grab something, please email me a pic of you wearing it, dm me, or tag me so I can check it out!
⛧ \\ Patreon: / htll
Please only donate if you have the means, if you don't - the best way you can help is to like, comment and share
Any amount you contribute will be poured back into the channel to bring you better content!
⛧ \\ Donate
BTC: 3QHZ4z7UuryXuVkMH3NtVTKrBrwyqtyiPD
ETH: 0xF7f848410960DC2C220555d5a70E3505fB4f271F
USDT (ERC20): 0xd6e40aa8b2ff210097b5abe960fd57a51fd96b46
------------------------------------------------------------------------------------------
\\ Hex Camo E-bike V9.0 - QS273 \\
This has been a long time in the making, I've been wanting to remake this build for about 3 years now and it was always my plan to replace the older smaller battery with one that could do the motor justice.
1. The Frame
This is an older frame from China that was very cheap - it's burly, heavy and should hold up to the power that I'm putting through it. The swingarm on this one is super beefy compared to the EEB version, but the trade off is that it is a lot heavier.
2. The Battery
Custom made GTK pack, 70Ah, 72V, 200A BMS. It has two 150A Anderson plugs with 2 8G wires per pole!
3. The Controller
Not shown yet, but it's a Sabvoton SVMC72200 200A controller, it's fully programmable with regen braking.
4. The Motor
It's a QS273 V3 - T3.5 motor from QS. Rated for 8000W but you can push these much higher as they are huge and heavy and can handle a ton of power, a lot more than the QS205s but there is a weight penalty.
⛧ \\ Full write-up with pics is on the main site: hightech-lowlife.github.io/pr...
------------------------------------------------------------------------------------------
⛧ 2022 High Tech \\ Low Life | - Cyberpunk - Projects - DIY - Art - Tech - Modding - ⛧

Пікірлер: 130

@hightech-lowlife Жыл бұрын

Hey guys, this is the TL;DW (too long; didn't watch) version of my entire ebike V9.0 build in 20 minutes, this is 4 months and hours of content packed into one video. If you haven't seen any of build videos and want to there is a playlist here: kzfaq.info/sun/PLGIzSUqaQbL48io1IYVfJcatbrUcS7-vA but If you've been following this build from the start I appreciate it and you can skip this one! I have a ton more projects on the way so stay tuned! Thanks again for all the helpful feedback and comments 🍻🙌

@lecroixband Жыл бұрын

Yup, you're the guy I'll look for when my business pays off I WANT THAT BIKE!!!

@hightech-lowlife Жыл бұрын

Awesome man, I wish you the best of luck and most success 🍻Thanks so much!

@racerx2095 Жыл бұрын

Ok now you're the best ebike builder on KZfaq hands down nobody has ever built a better ebike than you and that just a FACT bro💯👍👍⚡⚡😁⚡⚡⚡

@hightech-lowlife Жыл бұрын

Thank you so much!! I know that can't possibly be true 😂but I appreciate it so much man, thank you!!

@racerx2095 Жыл бұрын

@@hightech-lowlife Nobody on KZfaq has a better ebike imo.Trust me I've watched a whole bunch of videos and your bikes is one of the best bikes I've ever seen bro

@hightech-lowlife Жыл бұрын

@@racerx2095 Thank you man, I really appreciate it! 🙏 I hope I can bring you guys even more crazy builds like this one 🍻

@racerx2095 Жыл бұрын

@@hightech-lowlife Yeah like l said l haven't seen a better ebike builder ever 👍👍💯⚡⚡

@hightech-lowlife Жыл бұрын

@@racerx2095 Thanks so much brother 🙏

@Spacecruizer203 Жыл бұрын

love the honeycomb hideout paint scheme

@hightech-lowlife Жыл бұрын

Hell yeah man! 🤘 Thanks bro 🍻

@Spacecruizer203 Жыл бұрын

@@hightech-lowlife yezirrr

@46B3x2you Жыл бұрын

Wow. I'm beyond impressed. Your drive to create is contagious. I especially liked your honesty about welding. I want so bad to learn how to weld and your videos inspire me to take on the challenge. How did you add the graphics to the plastic? Was it out sourced or in house ? It's amazing. I just ordered two frames and I'm inspired by what you have done. I will never be able to do what you've done here but I'm creeping up on retirement age and I want live out my retirement years building, designing and customizing e-bikes. Your work is genius . You're an inspiration that keeps me hopeful . One bike at a time.

@hightech-lowlife Жыл бұрын

Thanks so much Jim, it means a lot 🙏 You should 100% do that and give welding a try, it's simple and easy to understand what to do, just very hard to master - as with everything, it just takes time and repetition to get better. I have access to a CO2 laser for all my acrylic cutting and engraving, so I do them myself, all graphics are made by me. You can have this outsourced though if you don't have the tools 👍 That's really why I made this channel, to hopefully inspire other people to build the things they want to see come into the world, so thank you for letting me know! I hope you share your creations to inspire others too. There aren't many things more fulfilling than creating something that was just an idea in your head and seeing it take form over time. I wish you the best of luck on your journey, it's not always the most fun or easiest thing to do at times - especially learning new skills but I will say that if you stay dedicated and just take breaks when you're frustrated but then come back at it when you're ready, the effort and persistence you invest will always reward you 🍻 Thanks so much man!

@livelrge1 Жыл бұрын

UNBELIEVABLE!

@hightech-lowlife Жыл бұрын

Thank you so much!! 🙌

@Iamthevoids Жыл бұрын

By far the best ebike builder on youtube, i would love to own one of your masterpieces one day. I wonder how hard it would be to make the pedals only purpose to charge the bike, not for movement, like if your chillin on a break you can keep pedaling and recharge your battery, if the rear wheel still needs to rotate maybe a kickstand that lifts the rear end like on an old gs500 would suffice? your an inspiration for sure, thanks for existing and stay amazing :D

@hightech-lowlife Жыл бұрын

Thanks so much man! I actually have to sell this bike sometime soon as I have more projects to make and I haven't been riding it as much as I should. I usually do sell my creations as I can't keep them all, so maybe in the future it will be the right build at the right time for you. It is possible to make a pedal generator, but aside from a novelty I'm not sure it's practical to implement from a functional standpoint, definitely possible though. Thanks so much man, I have way crazier builds on the way too 🍻

@spacemansam_ Жыл бұрын

VERY clean build bro! Hands down the cleanest and most extensive stealth clone builds i've ever seen.

@hightech-lowlife Жыл бұрын

Thank you so much, it means a lot!! Much appreciated 🙌🍻

@ashpunting Жыл бұрын

I really like your DIY Futuristic Enduro bike build, brother its Amazing and Literary out of this world👏 👌

@hightech-lowlife Жыл бұрын

Thanks so much man, much appreciated! 🍻🙏

@realeyesrealizereallies6828 Жыл бұрын

Awesome project bike...Lots of work...Great job, enjoyed the series...Perfect blend of design, art, creativity, fabrication, electronics and video documentation....BRAVO BRO....

@hightech-lowlife Жыл бұрын

Thank you so much!! Much appreciated for following along 🍻🙌

@marvinlockhart8566 Ай бұрын

This is a work of art

@hightech-lowlife Ай бұрын

Thanks man!

@scizorunleashed Жыл бұрын

That is a work of art, beautiful build.

@hightech-lowlife Жыл бұрын

Thank you so much!! 🍻🙌

@gi169 Жыл бұрын

HT//LL, the 20 minute montage was really cool. Bike looks amazing. Thanks for the new content. 🍻👍

@hightech-lowlife Жыл бұрын

Thanks so much, I always do a recap at the end for the people that don't want to or can't invest the time in the build videos 👍 I wanted to get this out last week but I write all the music and I was working on a new song to go with this video and because I'm still learning a lot about music production it's really hard for me to even make not-so-great songs 😂, I already have two new projects that I'm going to be showing you guys, one of them is a bigger one! Thanks for the support man!!

@gi169 Жыл бұрын

@@hightech-lowlife Enjoying the channel man... Thank you...

@CharlesNewkirk-lb6uh 12 күн бұрын

Yes nice build!

@michaelghabour5547 Жыл бұрын

Oh heck yeah buddy…. Outstanding work and attention to details.

@hightech-lowlife Жыл бұрын

Thank you so much!! 🍻🙌

@solomanthetegu1415 Жыл бұрын

Crazy build brother, I watched all or 99% of this transformation. Nice work......

@hightech-lowlife Жыл бұрын

Thank you so much for following along, much appreciated 🍻🙌

@kudzy11 11 ай бұрын

Seriously...Hats off to ya!!

@hightech-lowlife 10 ай бұрын

Thanks so much! 🍻

@Alex2OC Жыл бұрын

Epic Project Epic Build

@hightech-lowlife Жыл бұрын

Thank you so much man!!

@alphonsotate2982 Жыл бұрын

Awesome build review one bad e bike POWERFULL I love the theme and affects happy riding

@hightech-lowlife Жыл бұрын

Thanks so much man, even more projects on the way!!

@dredfxcustompaint Жыл бұрын

Sick build was great to follow this one 💪💪👌

@hightech-lowlife Жыл бұрын

Thanks so much man, much appreciated, I have more builds on the way!!

@dredfxcustompaint Жыл бұрын

@@hightech-lowlife nice one bud 👍 look forward to them

@hightech-lowlife Жыл бұрын

@@dredfxcustompaint Thanks brother, I gotta check out some more of your painting vids your content creation is off the charts man, every day!

@dredfxcustompaint Жыл бұрын

@@hightech-lowlife I know mate day to day filming 🎥

@Full_Throttle_no_Brakes Жыл бұрын

You know what I gonna say but I will say Anyway. Amazing awesome build! Now is just enjoy and ride to the Sunset!

@hightech-lowlife Жыл бұрын

Thanks so much man 🙏🍻 New project coming soon!

Жыл бұрын

Damn this thing looks so good

@hightech-lowlife Жыл бұрын

Thank you so much! I will be building a cyberdeck soon (hopefully soon)!!

@rodneyowens4876 Жыл бұрын

That's one bad ass bike

@hightech-lowlife Жыл бұрын

Thanks so much man! 🤘

@darrenhobson2244 Жыл бұрын

followed from the start and thanks for another vid. Awsome sound track for an awsome bike. love to know the top speed and if you were able to sort it.

@hightech-lowlife Жыл бұрын

Thanks so much man! Much appreciated, I'm still working with the mfg, I will totally update you guys when I make progress on it - I will hit 70 at some point, just depends on what it will take 👍🍻🙌

@Alex2OC Жыл бұрын

Im not sure but, When you use all travel of the Fork,.. maybe the Front Wheel touches the Contoller Case. On a big Jump or Drop maybe on a hard Stoppy you will go over the Bars. I would check this...

@hightech-lowlife Жыл бұрын

Thank you!! Yes, it actually might be possible, I haven't taken a jump like that though - I will be increasing rake on my next round of mods and it will move the tire a bit more out in front 👍

@Kwipla Жыл бұрын

Nice recap! Also i was just thinking how cool would a drone be for final clips of finished bike riding

@hightech-lowlife Жыл бұрын

I know!! I can't tell you how many times I wish I had better camera equipment and a team that could help me produce amazing riding shots! I will slowly grow my production to give you guys even better videos, thank you!!

@thelavalattergamer6242 Жыл бұрын

If I had like 10k I would buy your masterpiece and I would cruise around every day I love your video its very entertaining

@hightech-lowlife Жыл бұрын

I'd sell it to you for less! Thank you so much, I'll try to take more riding videos for you guys, maybe a night ride with the lights 🍻🙌

@thelavalattergamer6242 Жыл бұрын

@@hightech-lowlife thank you

@pawelodz8050 Жыл бұрын

Wow this ebike is awesome! Pinion gearbox or Sr Suntour would be nice to add 🙂

@hightech-lowlife Жыл бұрын

Thanks man!! I will look into it 👍

@crapenter3392 Жыл бұрын

Gotdamn!!! Impressive

@hightech-lowlife Жыл бұрын

Thank you so much!!

@aldionsylkaj9654 Жыл бұрын

Hopefully this video blows up

@hightech-lowlife Жыл бұрын

Thank you so much! Here's to hoping 🍻🙌 Thanks man!!

@Prophecy-bs9ds Жыл бұрын

Awesome bike build. Forks look a little steep though.

@hightech-lowlife Жыл бұрын

Thank you!! Yes, the more major mods I will do with this is increase front rake - that's for later though 😎 front and rear suspension will be redone 👍

@alphonsotate2982 Жыл бұрын

My e bike build is a 3000watt rear and 1000 watt front wheel drive with 20 inch fat tires shinkos and it is black with aluminum deck metal side panels and deck metal flat fenders on it with a read case square led head light with red checker square hand gripes.my theme is the industrial look.

@hightech-lowlife Жыл бұрын

That sounds so cool man! Do you have any pics of it, I'd love to check it out! Must be a fast bike, it sounds very fun!!

@fabiot.p.8344 Жыл бұрын

MERAVIGLIOSA . I LOVE YOUR BIKE. FANTASTICA BRO'🤙🔝⭐⭐⭐⭐⭐

@hightech-lowlife Жыл бұрын

Thank you so much bro, much appreciated 🙌🍻🙏

@robetofurtado2762 2 ай бұрын

projeto incrível parabéns

@hightech-lowlife Ай бұрын

Thanks so much man 👍

@VirtualCryptid Жыл бұрын

I've been following this build for ...well since it began. I lost it somewhere but what fork did you use?

@hightech-lowlife Жыл бұрын

Thank you for following the build! It's a DNM USD-8 👍 It's a very stiff fork, which is great if you're going for that. I prefer more squish though, the RST Killah fork that I tried is more my style, if I keep this bike I will swap it eventually.

@jamesmetcalf6591 Жыл бұрын

Can you build metal full fenders or know where I can get some to fit on a totgaurd 27.5?

@hightech-lowlife Жыл бұрын

Sure, but it would be easier (and a lot cheaper) to just adapt some that are premade. Just do a search on Amazon for "metal bike fenders 27.5". There are a lot of universal fenders. 👍

@fizzy5558 Жыл бұрын

Hi, what type of voltage converter did you use to power all of the external lights?

@hightech-lowlife Жыл бұрын

It's a 15A one, like this: www.ebay.com/itm/114489583192 👍 I will be making a video soon on how to 'properly' add lights and LEDs to your ebike.

@MaximusStimulus Жыл бұрын

Hope the welds hold !

@hightech-lowlife Жыл бұрын

Thanks man! So far so good, while building I did beat the crap out of them with a hammer and they didn't budge so I should be ok 👍

@paulflinn3521 Жыл бұрын

Just wondering why you didn't use an ASI Bac 8000 controller? It has way more goodies than the old Sabvoton!

@hightech-lowlife Жыл бұрын

Oh yeah? What kind of goodies are you talking about? Even the 4000 would be overkill as my battery "only" outputs 200A so I'm not sure the goodies you're speaking of would justify the additional cost - the 8000 is about twice the cost of the 72200. But if you know something I don't, I'm all ears. The thing I don't like about most of the higher output controllers (bac, kelly, etc) is lack of metering and display options. I may do another revision of this bike in the future with an 1800A controller, but I need to find a battery setup that can output a ton. Although it's admittedly quite pointless as this bike is way overpowered as is, but then again I'm not really doing any of these things for practical purposes 👍

@ryanmfitz Жыл бұрын

any chance ur in CA and wanna ride. such a badass build. i see waterfront like its bay area?

@hightech-lowlife Жыл бұрын

Thanks so much man! Possibly, right now I don't even have enough time to eat or sleep so I don't know how well I would be for hanging out 😂 but if I can manage to get my schedule under control or less things for sure man.

@ryanmfitz Жыл бұрын

@@hightech-lowlife understandable hit me up when you can 🤙

@revparsons3tl Жыл бұрын

WooooooooooooooW👍

@hightech-lowlife Жыл бұрын

Thank you so much!! 🙌🍻

@revparsons3tl Жыл бұрын

@@hightech-lowlife 👍 your welcome

@johnny1902 Жыл бұрын

I want one of these. I'm wondering where he got the headlight bar from.

@hightech-lowlife Жыл бұрын

It's just a mini light bar, like this: www.ebay.com/itm/334218187650 👍

@pat_0248 Жыл бұрын

I have the same motor on my Bomber that I got my in KIT but it's a QS Motor V3 of 8 Kw nominal and 12 Kw peak and it's a treat, but at the moment I have a problem of leak at the valve of my air chambers, which are 4.5 mm thick, although they are puncture-proof, and the original air chamber, much thinner, which is about 1.2 mm thick, the valve had broken. completely torn off and I don't see where the problem comes from. My motor is also wound in 3.5 T and before setting certain parameters in the MQCON application of the Sabvoton controller which is a nominal 150 A and my battery a 53 Ah with a bms of 100 A in discharge and 50 A in charge, I was doing top speeds between 92 and 96 km/h and sometimes 98 km/h depending on the weather conditions. and I have correctly adjusted the regeneration on braking and when the throttle grip is released, which means that I gain between 10 and 15 km of autonomy and that I save my brakes, because I have a lot of engine braking and even in descents of more than 8% I don't need to brake, after a while I even have to accelerate again to regain speed, and then I had a hole in the acceleration 2 seconds or so where my Bomber was accelerating reasonably and then it would shoot off, but since I changed those settings I don't have that 2 second latency anymore and it accelerates almost instantly and I can get it up at top speed between 98 and 108 km/h GPS therefore real speed and not on the LCD Display and the manufacturer is given for 110 km/h, knowing that my Bomber with its new Bridgestone rear tire and this large anti- puncture weighs 82.5 kg and I weigh 77 kg, but you can go faster with these engines, because they accept a maximum voltage of 96 Volts, moreover when I drive fast for a long time and in the middle of a heat wave with 30 to 36 degrees outside, I measured the temperature of the engine with a laser thermometer and the temperature was always below 50 degrees, while it can withstand more than 100 degrees without problem, which proves that this motor can give more and therefore run faster with a higher voltage and I had known that before, I would have tried to find a 96 Volt controller and have my battery manufactured in nominal 84 Volts instead of 72 Volts and I'm sure it could go up to at least 125 km/h or even 130. Here is the latest video uploaded of my Bomber, and I speak at the beginning of my double braking at the front, which I had a lot of trouble getting, but now it brakes really well, it's hydraulic Tektro 4 plungers: kzfaq.info/get/bejne/fbBpjZiYuZ3PdIk.html

@hightech-lowlife Жыл бұрын

That's awesome man, sounds like an incredible bike I will check out the video! I hope you get your tire valve situation sorted very soon. I also use regen and it's great! The QS273 can handle so much more power, it doesn't even get warm when I run it. I think you're right, upping the voltage is the way to go if you want to go even faster, I probably will do this in the future to this bike just to try it. I also want to add double discs up front too! Thank you!!

@pat_0248 Жыл бұрын

@@hightech-lowlife I struggled for several months to have this double braking, because normally a double disc and fat bike brake caliper additionally controlled by a single lever, that does not exist, but only for large thermal motorcycles, as I have in the past, but I had seen it on 2 or 3 videos on KZfaq of guys who had also built their Bomber themselves, and it was Tektro but 2 pistons but on the other hand bigger than the 4 pistons of the Tektro that I have on my Bomber and on my Fat bike. In addition, before I finally found this custom-made double brake on Alibaba, I had to ask for a 2nd caliper adapter which is specific to my DNM pneumatic fork which is a treat and which allows you to have a double caliper, only he had put with the fork, a single adapter, and as despite my numerous and long searches as well to find this 2nd adapter and a double braking system but for fat bikes, I ended up claiming it directly on the DNM site, they sent it to me, but it took a long time and they made me pay a lot of money for it, but hey, when you're passionate, you don't look too much at the price, I've already spent a lot of money in the past with my big cars. I'll give you the link from Alibaba and the manufacturer and builder of this dual braking system with the new Tektro 4-piston calipers, which I'm really satisfied with, once the brake pads have been run in. they advised me and put red pads on these 2 calipers, which they say are the best and it's really that they brake much better than the yellow ones. For the higher voltage, I do not know if they make Sabvoton controllers of the same model as mine but in 84 Volts nominal, but anyway, my battery cost me 2600 euros because made to measure by a French specialist of the battery, and I don't intend to make another one but with a higher nominal voltage, it is really of very good quality and the bms too, because by connecting the battery, I had several big short circuits and the last lasted a very long time and the big cables coming out of the bms started to heat up a lot and I really thought that my battery was dead, and that it might catch fire and then explode in my house, but no, not even, it holds a charge well, charges very well and quickly with a great adjustable charger that I found on AliEpress which is really of great quality, it does not heat up too much even while driving at full power, quite a bit of time and with an ambient temperature raised you as we have for several weeks in France...

@jessebeard6168 Жыл бұрын

How do u make the front wheel fit the fork

@hightech-lowlife Жыл бұрын

This frame was designed to accept a wheel of this size 👍

@Pyyeskyaw Жыл бұрын

OMG 😮

@hightech-lowlife Жыл бұрын

Thank you so much!!

@crack-chochi7098 Жыл бұрын

saludos me encanto el resumen pero que remos un mini video con la bisi rodando

@hightech-lowlife Жыл бұрын

Thanks you so much 🙏🍻 I will take more riding shots for you guys!!

@rcninjastudio Жыл бұрын

still my fav bike, something really special would have to top it 👍

@hightech-lowlife Жыл бұрын

Thank you so much!! Now I have to try and out-do myself 😂

@joeassadourian5181 Жыл бұрын

💪🥇💪

@hightech-lowlife Жыл бұрын

Thanks man!! 🙌

@coolquitepowerful Жыл бұрын

Nuts bolts are visible and it looks like a kids toy but nice effort with those wires electronics and machine work

@hightech-lowlife Жыл бұрын

Thanks man!! Visible hardware is the future!!! 🍻

@FBAExapt Жыл бұрын

Can you help me make mine lol. I have no clue what parts to order 🥴😅

@hightech-lowlife Жыл бұрын

What are you trying to build?

@Jason01Adana Жыл бұрын

VERY GOOOD WORKKKK !!!! sell me one pls

@hightech-lowlife Жыл бұрын

Thank you so much!! Everything is for sale for the right price! 😎

@kiiingrook8592 Жыл бұрын

I bet he had a lot of problems n mistakes that was painful to him lol, this design and connections is next level shit my guy 💯 respect to you 😎, im saving up to build my own soon.

@hightech-lowlife Жыл бұрын

Thanks man!! It was definitely a challenge 👍 You will enjoy it!

@kiiingrook8592 Жыл бұрын

@@hightech-lowlife i wont enjoy the problems and parts not fitting right 🤣 but doing as much research as i can before i start, dimensions are frustrating 🤦

@hightech-lowlife Жыл бұрын

@@kiiingrook8592 It depends on how you look at it, our success is purely derived from comparison, the larger the failure conversely the larger the success (or feeling of at least). I think the frustrations and problems deliver a greater sense of satisfaction in the end, which if you're making your own things is the true benefit. If we wanted everything so easy we would just buy a premade bike with zero effort. Plus each project is more opportunities to refine your own skills and work on yourself internally - everyone thinks they are building an external object but we're really just building ourselves. As long as you do not give up you are guaranteed to succeed 👍

@kiiingrook8592 Жыл бұрын

@@hightech-lowlife I've been through a few with with my current ebike, at the end of completion is like the best feelings, which makes one ready for a nother challenge, although we may not know what we're doing or getting into but the confidence is special #ebikelife 💪 my guy 💯🔥

@hightech-lowlife Жыл бұрын

@@kiiingrook8592 You know the way already 🍻just keep making cool things man! Keep going!

@kimhyunwoo8983 Жыл бұрын

I think it’s cool but something about it for me has that really gotty feel to it, I think maybe without the led lights and whatnot it would’ve been a great build but it personal feels too much to me. (This is just personal preference though, the artistry on this bike is definitely the best I’ve seen on KZfaq)

@hightech-lowlife Жыл бұрын

Thanks so much man! I get it, this is definitely an "over-the-top" build 🍻 The world has gone minimal aesthetically and while I do appreciate that and think it's cool, I like to change it up a bit. I appreciate your feedback and comment, thanks for watching!

@electricbike2062 Жыл бұрын

Перед для России 😁👇 Это самый крутой электровелосипед в мире 🤠👍🤝 Но больше не садись за руль без шлема, маска не спасет тебя от смерти. Каков запас хода в км при скорости 100-110 км/ч? This is the coolest electric bike in the world 🤠👍🤝 But don't drive without a helmet anymore, the mask won't save you from death. What is the power reserve in km at a speed of 100-110 km/h?

@hightech-lowlife Жыл бұрын

Привет друг, спасибо за добрые слова! Thank you so much 🍻🍻 Yes, but also nothing will save us from death, only temporary prolonging of the inevitable 👍💀🛸 I will have to check, it's hard to check my display when trying not to die going that fast, but I will update you guys 🎇 Thank you!

@electricbike2062 Жыл бұрын

@@hightech-lowlife 👍