Vacuum Repairman | How to unclog Bissell Carpet Cleaner

Рет қаралды 12,998

9 ай бұрын

Helpful instructions on how to unclog your Bissell heater, why it clogs, and how to prevent it in the future.
If this was helpful and you would like to send me a tip as a thank you: venmo @Brett-Magnuson-3

Пікірлер: 26

@criticalfocus424 4 ай бұрын

Great video - I have a mature Bissell 8910 that wouldn't spray water. Disassembly was slightly different but your video provided the solution. The heater internals were severely clogged and your hint to check the hose connectors to ensure they weren't clogged was valuable as they were also clogged. Good as new again. BIG Thanks.

@paulb6152 2 ай бұрын

Advice is never to add vinegar as it can cause pump issues

@5HY_9UY_81 7 күн бұрын

Thanks much appreciated, had the same issue today with mine. ⭐⭐⭐⭐⭐

@robinwilliams2633 25 күн бұрын

Thank you!!! Fixed my Bissell ProHeat Pet up nicely.

@budmanzoom4441 Ай бұрын

Mine was a plugged up heater too. Spent hours taking everything apart - wish I would have gone straight to the heater first.

@jasonpearson3628 Ай бұрын

Thank you! Worked in 2024!!!!

@setthehookoutdoors 11 күн бұрын

I have the exact model in your video. The problem with mine is when i first turn it on it sprays like normal, then after 2-3 seconds it turns to a dribble then stops coming out. If i turn it off and back on it repeats that process. I tried cleaning the heating unit with no success. Any ideas?

@TheFalazure 11 күн бұрын

was wondering where the heater was on mine; I am having this exact issue, which means it is likely exactly this issue, but i had no idea where that heater was...probably going to save me a few bucks here.

@richardsvacuumcenter 11 күн бұрын

What is your model number?

@TheFalazure 11 күн бұрын

@@richardsvacuumcenter mine is a 9400-4

@mattanfang 3 ай бұрын

It looked like it is scale built-up. Was it hard/crunchy or soft build-up. I'm wondering and if vinegar in is in the clean water mixture that it could also possibly prevent it. Thanks for the video. I'm working on my little green machine that was clogged up.

@geraldbasile9012 Ай бұрын

Hey, thanks for your content. Had an older model followed the video. It was a bit conked up in the heater unit, cleaned that out nozzles were also clogged. Put it all back together now the water will not stop spraying. Is there anything I can attempt to do? Besides purchase a new one

@richardsvacuumcenter Ай бұрын

I’m not sure. I’ve never run into this sort of issue.

@czechzican 6 ай бұрын

hi, i have a model 9300b that has suction but won't spray from either the floor or the hose. i can't find any videos for that issue. it's either one or the other. any idea what the problem might be?

@richardsvacuumcenter 6 ай бұрын

Probably a clogged heater. That’s a long video. I’ve contemplated recording one but just haven’t done it yet.

@Freedom-kt1hz 3 ай бұрын

Hi I have same machine, mine sprays the water but doesn’t dry How do I fix it? Thank you 🙏

@richardsvacuumcenter 3 ай бұрын

Not sure. It could be many different causes. Check your filter screen. Red plastic screen looking part inside your recovery tank.

@mikeleduc683 Ай бұрын

look like dirty machine. has it ever been taken apart and clean. I have bissell and I clean it up after I use it. you got maintance to it. and keep it running.

@richardsvacuumcenter Ай бұрын

👍🏼