Watches 1 minute and 31 seconds to see the suction test. Did the same test to mine and had no suction. Saw that some gasket down by the motor head end was slightly popped off and put it back on, eureka! Thanks dude! I really like this vacuum and didn't want to get rid of it. Would've been a HUGE mistake for such a simple fix!

what a great guy, to decrease your own business, so we don't burn out our machines and have to throw them in the landfills. an angel. we need more of you.

This may be the fastest explanation on all of the checkpoints of a DC14 I've ever seen... and it's 11 years old. Props bro from the United States!

10+ years later, your advice solved it immediately. I had a hose clog up by the extended handle and didn't even notice. Love this evergreen video!

Thank you! I didn't have any real blockages but just taking the pieces apart as you demonstrated and then putting them back together solved my problem. That makes this Dyson 8 years old and still good as new thank you!!!

Thanks a million! I was practically in tears thinking I broke my vacuum for good, but a few deep breaths and finding your video has saved me tears (and money.) Cheers! :)

Thanks for taking the effort to help those of us that wanted to have a go but lacked the confidence to make a start Now that you've shown exactly what to do there was no longer any reason to hold back & our machine has a new lease of life

Well done Alec! I wish all KZfaq demonstrators were as clear and concise as you are in their discourses on repairs and remedies. Compliments too to your cameraman. Excellent clarity!

Great video thank you! Working on my old Dyson now. Just to say I think its very noble of a guy who looks like he makes a living from these jobs yet is willing to share his knowledge to allow us all to do it ourselves for free. (Well aware we all cant go to just his shop but you get my point lol)

Thank you sir, actually went to the repair place this morning to drop off our dc14. After many years of service it wouldn’t pull. The shop was closed so decided to look at some KZfaq vids and fortunately found yours! Started pulling it apart, finally found an ink pen and bunch of debris lodged in the elbow at the bottom of the hose. Cleaned it out and it works great! Thanks for your time making the videos!

Alec - Bloody brilliant! Not only are you showing how to fix the probem, you are also showing how to remove the filters etc etc. Thank you for this excellent video!

Thank you!!! I was able to fix my vacuum myself :) My husband and I clean the filters on a regular basis, but we've never checked for blockages. Today when cleaning I noticed almost zero suction. Your video allowed me to find a major blockage (plastic train wheels from my 3 year old's toy......). Anyways thanks again for your helpful video!!!! We sure do love our Dyson!

Way to go Alec! Saved me a lot of time and trouble! I was just about to order a replacement vacuum because of my frustrations with the problems I was having. Kudos to you and thanks again!

Thank you solo much! I just took my vacuum to the repair shop. They said it would cost over $200 to fix and a 4 week wait. It was the 4 week wait that made me take it back home. I watched your video...washed my top filter, replaced my bottom filter, and checked the other areas you mentioned. It works perfectly now. I am going to call those repair folks and give them a piece of my mind and report them to the BBB for automatically telling me I needed a new clutch. Thank you!!!!

Thank you Alec. I'm picking up one of these for free because it is not sucking well for its owner, and she is giving it away. You have given me a simple checklist to see if I can resolve its problems - once fixed, I'm giving it to my brother.

This video is such a huge help! I have been ready to get rid of my dyson for a while because it loses suction constantly and I thought it was too complicated for me to look at! I loved the way he broke it down into simple steps and lo and behold, I dont think my filters have ever been washed or replaced. I am washing the foam thing at the top now, but I was relieved to know that parts are relatively inexpensive and I feel so much better about it now. Thank you thank you thank you:-)

You're a star. I started watching another video to change my filter, then this one popped up. I had exactly the ssme problem ... a bottle top. Thank you so very much for showing us this. The vacuum cleaner was destined for the tip! From a very chuffed 71 year old Grandma 👵😄

Wow... thanks so much for this video. I totally cleaned my DC07. Found the problem was the filters. Rang Dyson for replacements. After waiting 50 mins, only to be told my vac was obsolete. No spare parts anymore, no servicing etc. but I could get 25% off a new machine, I declined this offer and went online, found the parts I needed. Only cost me $43. A couple of days later the parts arrived, I put my machine back together and now it works like a dream. I am so grateful for your help. Thank you thank you

My mate gave me his old dyson and said the filters just needed replacing. Replaced the filters and the thing still wasn't sucking. After watching your video I learned the damn thing was blocked with huge fragments of glass and french fries lol...it works now! Thanks

You have kept my old dyson running to the past several years! I just wish I could give you my business, but Australia is a bit of a shlep from the USA! Thank you so much!

Hi Alec Thanks a lot for your video. I have Dyson DC4 and I was not getting good suction when I using the attachment. The tube without the wand had perfect suction, after seeing your video, I checked the wand for blockage and cleared it. The suction using the wand is now normal. I am posting this comment for the benefit of others who may have similar problems with their Dyson DC4.

Worked like a charm! The same part that was clogged in this video was clogged on mine. I really appreciated the step-by-step instructions to check the Dyson. Brilliant!

Thank you Alec. I always forget to clean the filters! Dyson working much better now, even though it is over 10 years old.

thank you for making this, i had a insane blockage at the bottom of the hose, I had no idea how to open it. I tried Dyson support, you saved me a repair bill.

Thanks Alex you have just saved us a repair bill, we have a DC33 and the blockage was exactly where the one in your video was. Great cheers mate from the UK.

Thanks for the great instructions! You saved me a trip to the repairman (not to mention the cost). Much success to you and your business!

I recently brought a 2nd hand dyson and it was working great for about 2 weeks then stopped, couldn't take it back and I cleaned all the filters but it was a blockage just like in the video :) cleaned it all out and flushed it through and it now cleans better and sounds a lot more healthy :) your video really helped :)

Thank you soooooo much for making this video. Our Dyson DC14 pet series, lost suction. We changed the clutch to no avail...We found your video...went through the steps and voile....we're in business. I'm lost without my Dyson...Sincerely, Teresa DeBruyn, Hemet California

Great Explanation and very helpful. My suction issue was due to a small detached hose on the bottom of the vacuum near the brush. This seems to come loose on frequent occasion even after being replaced....

This was the 5th video I came across & the only one that covered everything simply, good on yer mate! Top job

Thank you so much for this video. Our dyson which is a little newer then the one in the video stopped picking up. After checking all the parts as per your video I found the suction pipe (at the bottom of the machine) had come loose and pushed itself into the corner. After pulling it out and re fitting it the machine was cleaning with power once more. Thanks!

Many thanks!! Following your advice I found a major blockage of hair and wood chips. You saved us a few hundred $$ on purchasing a replacement vac. Great video!

Thank you, you are a good person for showing this. I just picked one up at an estate sale and now it is running perfect!

Alec - Thank you! This wasn't for my exact model of Dyson, but it helped me identify the trouble areas. Much appreciated!!

Alec - thank you!! Saved me a lot of heartache. It was something stuck in the side pipe and I wedged it out like you did!

that was so nice of you to share that. My yellow Dyson is probably 10 or more years old. I did all the above. Only exception is sticking that rubber hose threw. Thank you I hope that solves the problem.

Thanks Alec! Had checked everything, fixed the broken drive belt, cleaned the filters etc. Watched your video and didn't know about that last 'pre-cyclone' bit. That's where it was blocked. Saved me a fortune. Now I can really say "my Dyson sucks"....

Fantastic so helpful .... I had no confidence taking off the circular filter fearing I might brake the side clips...many thanks to your guide it came off in seconds and the filter has been replaced.

Your videos are awesome. Thank you for taking the time to explain and show. I am servicing my vacuum and replacing the clutch because of your video. Thank you!

Thank you so much!! Following your steps and having success is everything. You were very clear in your instructions and video. Troubleshooting is the most important step. Now I want to repair vacs. 😊

Thank you! You helped me figure out how to fixed my vacuum. It was clogged on the side and by removing that small piece- which I had no idea how to do. It did the trick and I found a eureka of clog. Thank you

Amazing!! Your video was so easy to follow. I was going to buy a new machine, but it looks like all I needed was to clean the filters. Another helpful tip would be showing how to remove the elbow -- mine was full of debri; I even found a pen in it! Thanks again, your video was very helpful! Mary

Thanks Alec! You solved my problem!! Super helpful, so glad I checked out your video. Thanks for the kindness in posting it. ;-)

That really warms my heart. My favourite nephew is autistic so your comment is very special to me. I am just thrilled he likes the video

Thanks Alec, 11yrs later, i've just watched this and now sorted ours great video, advice!

Awesome! Great Job Alec - straight to the point, crisp & clear

Thanks mate. That video did the trick. I was able to get my Dyson back in tip top shape thanks to you.

Dude that was awesome. This is exactly the kind of video I come to youtube for. TO LEARN! Cheers mate.

After viewing your helpful video I found my issue and resolved it. Thanks!

Video helps me get started, where I didn't know where to start before.

Your video was very helpful. Our DC14 has a tube on the underside near the brush, That was where a stick had lodged and created a jam of leaves and dog fur. Thanks!

Great video. Found out through inspection by bottom hose was lose underneath. But the video give you 8 to 10 checks. very helpful.

Thanks sooooooooo much!!! I was just about to spend a lot of money buying a new one when I found this! I followed your instructions and fixed it myself. Really grateful for your post. :)

Thanks for the video. I had a blockage in the tube on the side. I would have never found it without this video.

Wow this video saved me lots of money. Thanks I owe ya one!

Thanks for the video. I have a DC animal and was about to go out and buy a new hoover. My loss of suction was caused by a clogged up filter. I washed the filter, dried it out and it's now working good as new.

That was a great video! As I do monthly, I cleaned the filters & then there was no suction. As I lifted it to table, a gasket fell off on the floor. I couldn't figure out where it went. I realized, when you went through finding the blockage, it was the gasket where the cyclone fits into the suction. *A bit rectangular in shape, and on the left side, if you are looking at the front. I'm a widow, but very handy with tools, etc. You saved me hours of frustration. Thanks!! Great video!

You Sir, are an absolute hero. I had a big ball of fluff in the same spot. Cheers!

Thanks Alec - saved a trip to the Dyson shop! - Very easy to follow video - good job!

Thank you! That helped me with my DC15. I had never paid much attention to that exhaust filter, and it is badly clogged up.

Outstanding, had mine in bits looked everywhere then watched this vid, poked a bit of stick in and out came my daughters little toy. Now works as new thanks :-)

Cheers Alec.You have saved me a few quid.Thanks mate from Glasgow.

Thank you, it was so easy to follow you along and fix my vacuum!!!

What a wonderful service (ha) you provide, posting these videos. Thank you so very much.

Great tutorial! You helped me troubleshoot my issue, now my Dyson sucks again!

Saved me a lot of money with this vid. Thanks!

Awesome! Thank you for the help! I followed the steps and found the clog in the clear hose under the bottom. It was HUGE. I'll maintain my Dyson more often now. (Now that you tought me it had filters... I didn't know.) Where do you find the replacement hepa filters?

Very professional, well done!

Alec these videos are awesome. you have got me out of a few jams!!! keep the videos coming.

Did you ever dream that your video would still be out there helping people almost 9 years later? Well, it is! Now I know how to at least take my machine apart to figure out which section is blocked. Oh, and thank you so much for not trying to scream over the sound of the vacuum. Very well done! Thank you!

Thank you for this video. I have the DC18 Slim, and it turns out that I had a clog in the same place as the video. (The only thing is, the poor design of DC18 Slim makes it very difficult to clear that tube.) Vacuum working like a charm again. Thanks.

Thank you for showing how the exhaust filter comes off the machine!

Excellent video. Short and to the point!

Thank you! Well done and easy to understand. Didn't even know about the post motor filter.

Thanks Alec! Top notch repair videos. You have a gift for teaching.

That was bloody awesome! Found my blockage, thanks to your tutorial!!

I bought mine eight years ago and have never done anything to it or had a problem with it. Oh yes, it once sucked up a piece of piping and I just took it apart and it was inside that first little elbow you opened. I love it. My only problem is that the wand doesn't reach high enough to pick up the cluster flies in my high windows and I can't find an extension to fit. Thanks for the tips though.

Perfect! Our DC14 also had a lid stuck in the exact same place. 👌 Cheers!

Thanks! This helped me solve the suction problem with my Dyson DC14.

thank you!! My dyson was losing suction and I didn't know why - I just checked all of the places you showed and yep - stuck in the u-bend!!

going to try looking through the filters now, thank you. If this works you've saved me hundreds in buying a new hoover.

Thank you! I had done all the troubleshooting described in my manual, and still couldn't figure out where the intermittent suction loss was coming from. What you show at 4:40 in your video is *exactly* what was wrong with my DC14. Thank you!

4:02 - that was my issue, that piece was loose on my machine. thanks for the video!

omg! now i finally found the problem on my vacuum😀THANK YOU SO MUCH!

Ok so without seeing your machine it is a bit difficult however there is a common problems often overlooked. The first this to do is look at the machine from the side once the handle is lowered into vacuum position (get someone else to hold it) and see if the base plate is actually sitting flat on the carpet. Over time the part that pivots can wear and get a bit stiff asisde from replacing it you can put a little bit of WD40 or RP7 in the joints so that it creates a seal on the carpet.

Thanks for this! Just found Jermaine Defoe in ours!

Your videos are fantastic- thank you and well done 👍🏻

Just watched your video and the suction on the actual hoover is brilliant, I look after it and clean filters regularly. The problem is I have no.suction at the telescopic wand, why woukd this be, doesn't appear to be any blockages anywhere

Great video...Exactly what i needed to sort this cleaner out....👍Thank you

Just did what you said and there was no blockage... yet I put the bloody thing back together and it works now so... mission accomplished I suppose? *confused*. Thanks man!

Thanks for the kind words it is really appreciated :)

A great guide, thank you Alec

Thank you so very much for this video! Extremely helpful!! 😊

Thank you so much for this!! My vacuum is like new again!

Brill, just what I needed, thank you.

Cheers matey - that sorted my problem out like a charm!

Great Stuff, Hope it works beautifully for you.

Great job mate - problem solved! Thanks from Tom the pom in London

Nice clear and clean explanation!

Thank you!! Saving me some cash getting my vacuum back up and running!!