Van Fit Out: Building a Custom Drawer

Рет қаралды 444,235

4 жыл бұрын

I got the heavy duty drawer rails from Fullie Hardware, here in New Zealand www.fullie.co.nz/collections/...
Music is by DJ Grumble / gbeats
AND GurtyBeats / gurtybeats
Also, the track at the end is:
Divertissement by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/...)
Source: incompetech.com/music/royalty-...
Artist: incompetech.com/
...
Donate here if you would like to help the channel
www.paypal.com/cgi-bin/webscr...
The below are affiliate links. I get a small percentage when you buy using these links. It does not cost you anything extra, but helps supports the channel. Thanks!
My Tools
Tool belt amzn.to/3dXMZnk
Tool belt shoulder straps amzn.to/3AI0VLU
Hammer with wooden handle amzn.to/3jRhQ92
Rubber grip for hammer amzn.to/3jTM7UE
Speed Square amzn.to/3yAaE5f
Makita Circular Saw amzn.to/3qYzaKH
Track Saw amzn.to/3dV9wkF
Awesome ratchet clamp amzn.to/3dSGa6s
Impact driver (main drill) amzn.to/3xDmBat
Other drill for pilot holes amzn.to/3yAYjh4
My Table Saw amzn.to/2UzuOxp
My favourite vacuum (newer version) amzn.to/3yxss0S
Full face mask amzn.to/3hH4Cce
Ear muffs amzn.to/3yNAWBl
Green line laser level amzn.to/3yqYdJ0
The Camera Gear I use
Main Camera amzn.to/3AD2if5
Backup Camera amzn.to/3jTGTbv
Main Lens (main camera) amzn.to/3wp0hzU
Lens for Backup Camera amzn.to/3jWaFfU
Microphone amzn.to/36pNWAA
Tripod amzn.to/3yxSeCb
Headphones amzn.to/3xqm2R4
Drone amzn.to/3xp9OrO
Aeropress (Coffee) amzn.to/3ijpvdQ
SEND STUFF TO HERE
PO BOX 3506
Richmond 7050
New Zealand
Disclaimer:
These videos are intended to provide information and inspiration only. If you choose to imitate, duplicate or copy anything you may have observed in these videos, you do so at your own risk. Scott Brown Carpentry Ltd does not take any responsibility for any action taken as a result of the information or advice on this KZfaq channel and shall not have any liability in respect of any injury or damage that may result.
To view full disclaimer, click here: www.scottbrowncarpentry.com/d...

Пікірлер: 296

@StellaForteStellaForte 4 жыл бұрын

UK subscriber here. The manner in which you go about your business demonstrates serenity, an eagerness to overcome a problem and the satisfaction that waits once a problem has been conquered. I don’t know if you get this a lot but your informative, friendly and professional episodes has made me calmer in my projects. Hope that makes sense! The very best to you for 2020.

@f.demascio1857 3 жыл бұрын

High levels of organization make for high levels of happiness when conducting one's trade!

@simonandrews6160 4 жыл бұрын

Great work Scott. I just finished my new fit out based on your original design, with a few personal mods. Thanks for the inspiration :)

@owent2032 4 жыл бұрын

I love organisation and tidiness! Great build Scott!

@anthonygoodrich6487 4 жыл бұрын

Grats Mr. Dubbs, great vid Mr. Brown. I'm about to outfit a van I just bought and enjoy seeing your ideas

@soccovitch 4 жыл бұрын

That worked out nice! Just goes to show that everything we make is just a prototype and we always improve.

@kizzjd9578 4 жыл бұрын

Just like how doctors are always practicing!

@chefsteven34 4 жыл бұрын

Merry Christmas to you, your family, & friends. We appreciate all the resources it takes to bring Scott Brown Carpentry to life here in KZfaq land. Keep up the good work. From you friends in the Pacific Northwest USA. Cheers!

@DanSeaber-Shinn 4 жыл бұрын

Great - going to have to rip out all my storage and start again 😂 Looks awesome Scott! 🙌🏻

@olliemorrell6469 4 жыл бұрын

Brilliant content. Watching over from the UK and everyone’s vans are all the same. Would love a set up just like yours. Keep up the hard work

@Mudder1310 4 жыл бұрын

Great customer service from the rail guys.

@dejanbrice8774 4 жыл бұрын

I love how the international way of keeping the tubes re-usable is to stick a screw in the end haha! Nice one mate, good job!

@mastermetalshredder 3 жыл бұрын

Late comment here, but Dap makes a cap called the Dap cap. It kept some caulking of mine fresh for a couple months!

@axelamir8135 2 жыл бұрын

i guess im asking randomly but does any of you know of a tool to get back into an Instagram account?? I stupidly lost the login password. I appreciate any tricks you can offer me!

@desmondbrennan9577 2 жыл бұрын

@Axel Amir instablaster :)

@Joseph-jx8bl 2 жыл бұрын

95% of my power tools are Milwaukee, but I made the plunge and diversified my colors with a makita track saw…thanks to watching your channel. Thank you for the great show.

@welshman100 4 жыл бұрын

Dude I love your van fit out, mine is also custom. Just hoss everything in the back and let it settle as I turn corners! Gz Byron.

@Interior_Works 4 жыл бұрын

That's how I roll too

@CLCLTD 4 жыл бұрын

That’s actually a very good setup now with the side access aswell as top. Cool great video as usual

@gevanleeuwen747 4 жыл бұрын

Thank for your video's. I am a dutch self-emplyed carpenter and i learned from your way of working. A speed square was unknown be me. In combination with a battery skilsaw it woks fantastic. Keep up the work.

@HFRajuncajun 4 жыл бұрын

Did not know the track saw attachment for the cordless router existed. That is amazing. Thanks for showing that! Jealous of your whole van build. The new drawer just makes it that much better.

@johnnasey1770 4 жыл бұрын

Now i've watched all your vids, I eagerly await each new one and savour it! keep em coming Scott

@xCoolBreezex 4 жыл бұрын

Awesome drawer improvement

@royalvarez6436 4 жыл бұрын

Very nice redesign, I like that you accounted for clutter storage. Happy Holidays to all.

@jonparker8170 4 жыл бұрын

So good. Loving your work Scott...

@bartnettle 3 жыл бұрын

Well Done! A great use of a rain day!

@Maxkil 4 жыл бұрын

great timing, i'm doing my van this week...Awesome mate

@captmurf8357 4 жыл бұрын

Just love the edits. Music, narration, it's all perfect. Well done

@jghartman4482 4 жыл бұрын

Excellent vid, as usual. Thank you.

@dturner7182 4 жыл бұрын

excellent video on the drawer - I am in the process with your inspirational design of my fit out. I have the flooring done, was glad to see an update particularly the back stop that I can incorporate, a pull feature, paint instead of carpet, totally dig the pullout sections below the "drawer". Great design my man. Funny my last project some of the wood was from new Zealand Im in Indiana. Cheers mate!

@dvstN 2 жыл бұрын

Hi Scott, Thumbs up on your vlogs! I found that putting my powertools and tools (i dont need often on the jobsite) in my van shelf without the case. This gives me a lot more room in the van. This room can be used to store more tools or materials. My van layout is different though. I have a verticaal shelf on the left side to store powertools, some handtools and the battery tools i dont use often. On the right side of the van a small shelf to store screws and nails. My allday use handtools and battery tools are in 2 toughsystemcases with a trolley. Trolley in put in the middle of the van :) Regards from Holland,

@pauls4708 4 жыл бұрын

awesome idea executed well!

@azza1793 4 жыл бұрын

Byron, considering that Scott was sitting on those new drawer runners since March i wouldn’t expect the clamps anytime soon 😁

@robertlinell8467 4 жыл бұрын

That’s really good I maybe copy that for my new work van

@jamiewhitburn3599 2 жыл бұрын

Nice work - bloody good idea

@kevinkline3938 4 жыл бұрын

Hey Scott, I know that you love the systainers, but if you got rid of them you would have 75% more storage space. I used to have everything in it's factory case, but had a temper tantrum one day and fired them all in the bin. Best thing I ever did. Now I have a couple of totes with wheels that I load up with what I need for the job, and have tons of space for more tools! Merry Christmas from Calgary, Canada.

@MsElijah16 4 жыл бұрын

Kevin Kline Did u buy the tough system trolley ? I just use a wheelbarrow sometimes

@kevinkline3938 4 жыл бұрын

@@MsElijah16 Hello back, I use a two wheeler with a couple of large soft sided tool bags. I got mine from Home Depot, and I also keep some smaller tool totes with specialty stuff in them like electrical tools. I grab the one I need and through it on the big bag and wheel them in. Have fun renovating!!

@mcleaniechris 4 жыл бұрын

Hey Scott thanks a million for this, a real walkthrough, and great tips - perfect vid mate. Merry Christmas

@ScottBrownCarpentry 4 жыл бұрын

Cheers Chris 👍

@francoisfouche2568 4 жыл бұрын

Great build, tools are much more accessible !

@TakamiWoodshop 4 жыл бұрын

Says one organisation expert to another. 👍 (Boys - I need your help! 😢)

@francoisfouche2568 4 жыл бұрын

@@TakamiWoodshop What ... now you need our help !!! You are the one buying tools you do not have space for ... hehe !!

@mzu2787 4 жыл бұрын

Merry Christmas to you and Paerau.Have a great holiday

@ijd1961 4 жыл бұрын

Merry Christmas Scott and crew. Thanks for the great vids. All the best for 2020.

@bigbadelmo 4 жыл бұрын

If only my garage workshop was this organised!

@zavoina 4 жыл бұрын

Kameron is now envious, not just because you have drawer 2.0., but nobody else could have made it all the way in there and back out to attach the slides and stop at the end. If you were in The Great Escape you'd make a good tunnel rat. :)

@michaelplays2449 4 жыл бұрын

class build well thought out

@gratis191988 4 жыл бұрын

Your original build was the inspiration for my build in my van after years of struggling with shelves :-)

@josealc87 4 жыл бұрын

Your jokes and editing style are consistently top notch. Love your channel :)

@cksjoinery7799 3 жыл бұрын

I love New Zealand weather it reminds me of Britain you get just as much rain as us.

@maxcasa4681 4 жыл бұрын

very clean Scott, good work 👍🏽

@NigelTerror 4 жыл бұрын

Very nice. I love your van outfit. Wouldnt work for me tho i often need to bring jerrycans, buckets and bags of materials.

@davidmoseley6896 4 жыл бұрын

Great video. I have got to redo the racking in my transit soon may do draws have a great Christmas

@bullshieldsn69 4 жыл бұрын

Love the videos. Coming from Calgary, Alberta, Canada

@MovingToMnPro 4 жыл бұрын

Fantastic!

@metaspencer 4 жыл бұрын

Pretty darned organized mate. Well done

@_retrogamer999 4 жыл бұрын

really liking the draw

@cpt.hindsight 3 жыл бұрын

Nice way to add some value to your car😜 Thank you for, as usual, great content👌

@russlees2589 3 жыл бұрын

thanks for sharing that, I'm planning io building something similiar for the back of my truck. Being a sparky mine won't be as refined as your efforts, but enough information there to get me on the right track! Cheers all the way from Scotland. Definitley got a new sub 👍

@katrinabell7684 4 жыл бұрын

Very neat & tidy SBC.

@jjgrant6711 4 жыл бұрын

Need to put some plans together of the van fit out an sell them, thats a dope set up

@evanoff7771 4 жыл бұрын

I have really wanted to pick up one of these tall Mercedes work vans recently. Budget wise videos like this definitely help make the best of the Dodge Caravan I have now which really sucks in comparison.

@CharlieSkapentry 4 жыл бұрын

proper smart that. Wish i could kit out my van like that and store stuff in the van, but too risky here in the UK

@marksaunders3767 4 жыл бұрын

love the drawer system scott

@harrisontafea7680 4 жыл бұрын

Loving the content. Happy holidays bro

@matiakd 4 жыл бұрын

Exciting builder Neistat

@TABISURU2019 4 жыл бұрын

Hello. I am also remodeling a Hiace in Japan. 　　I'm glad we have the same hobby. : )

@craigdewar6634 4 жыл бұрын

Best you do the other draw mate. Always good to watch

@mrironmaskk1457 4 жыл бұрын

"The drawers in! Now i've got a big mess to clean up" *Moment of realisation* i laughed, great and educational videos man! been watching for a while, much love from the UK!

@benblackwell8719 4 жыл бұрын

Great viddy this week Scott that router attachment is pukka! , glad to see you got those Yankee adapters I sent you, have a good crimbo buddy.

@kmonnier 4 жыл бұрын

VAN! my favorites

@cb2000a 4 жыл бұрын

Dear Toyota: Please sell this van in north America.

@robohjhonson3711 4 жыл бұрын

Man I love these videos great build Scott looks like a good investment for time!

@krehbein 4 жыл бұрын

I just ordered a product called Decked for my f150. It’s a heavy duty plastic unit with 2 drawers and a plastic top. Very strong, but now I’m thinking custom will be a lot better. The drawers can be the size of my tools, even little cubbies for things like levels. Only thing is the Decked units are weather resistant. With a custom solution I would still need to use my truck bed cover.

@brianoneill350 4 жыл бұрын

Excellent

@Aduhwan 4 жыл бұрын

Scott Brown: Recently discovered your channel. The editing, music, and your selection of projects all make for a very cool view and easy for me (us?) to follow along. 👍🏾 I’m thinking I could use a Makita router and it’s too bad that we can’t get that Toyota van here in the States. 😎 Your channel is awesome. Keep up the great work! ✌🏾

@joshuamatheron1 4 жыл бұрын

Nice job. Merry Christmas from England

@jakobhovman 4 жыл бұрын

Great ideas & build. Very "fitting"...as the year "draws" to a conclusion...! Greetings to our Scott Houdini Brown...!

@paulhardie392 4 жыл бұрын

Merry Christmas scott when it comes. Have a nice brake

@cliftonobrien588 4 жыл бұрын

I would imagine those new slides cost a pretty penny. But they sure make for a nice drawer!

@MsElijah16 4 жыл бұрын

Awesome episode man, awesome editing

@justgregnow 4 жыл бұрын

Awesome drawer brah 👍 I have to do something similar to my van but you know how it goes, too many projects. 🤔😆

@ericcyc1 4 жыл бұрын

That’s exactly what I am going to do during the Christmas holiday

@markplumber3635 4 жыл бұрын

Just a quick happy new year to you from the Black Isle 😁 please keep the vids coming I really enjoy them Have fun today

@jamiefoote9940 4 жыл бұрын

Love it.

@bogdanmarkovic 4 жыл бұрын

This kind of rails are very common here in Europe. However, whenever you have some heavy drawer it is always recommended to use two pairs per drawer and distribute the load. Of course when looking at specs they are pretty much always ok for normal applications but it does not say how long are they going to last. Also, deflection (down) is always gonna be smaller when using two rails. It would be really interesting seeing how much the face of the drawer drops down compared to the line when it was fully seated within the van. Laser level would do just fine for that measurement.

@rileyeccleshall7592 4 жыл бұрын

Nice one bro!

@middymcguinness1645 4 жыл бұрын

Some job u done.🔨🔨👏👏🇮🇪🇮🇪

@Jamal.balaji 4 жыл бұрын

Nice done👌

@stevewharram5518 4 жыл бұрын

Love it mate

@sj183 4 жыл бұрын

Nice vid Scott time to upgrade the other side of the draw runners to match the new one and I'm sure it will make for another exciting episode

@petereyre5188 4 жыл бұрын

Glides like it slides just watch it ride 👌👌👌👌👏👏👏👏🏴󠁧󠁢󠁥󠁮󠁧󠁿

@tobywhalley4765 4 жыл бұрын

Love your vids bro!

@brucemacgregor2440 4 жыл бұрын

Merry Christmas

@clintburris5520 4 жыл бұрын

ICY AS ALWAYS

@rayana4250 4 жыл бұрын

And indeed, exciting it was.

@tonyclausen8106 4 жыл бұрын

Hi Scott. Great video, I like what you did the side entry storage. I just recently re-watched your old draw video to find out where you got your draw slides from. Mine arrived yesterday unfortunately they are one set short so I'll have to wait before starting my ute draw setup but can't wait.

@DaddyHexler 2 жыл бұрын

Sick.

@JackMoney 4 жыл бұрын

Subtle placement of your t-shirt. Very cool.

@marckruger1296 3 жыл бұрын

All you needed to do to make the old box fit, is rout the drawer slides into the sides. Half on frame. Half in drawer. I do however love the new disign!

@MrtinL1 4 жыл бұрын

Nice Byron. 😀👍🔨🔨🔨

@michaelzimmermann353 5 ай бұрын

Gonna modify this idea to fit my work van. 2018 dodge grand caravan, just need to make it slightly different to fit behind the driver seat. Need to be able to fit 10' sticks of PVC pipe on the passenger side.

@831hulk 4 жыл бұрын

Your shirt matches your van

@AussieRoberts 4 жыл бұрын

Would love to see a full time lapse of a house build or deck build.

@MandeepSingh-kl5rq 3 жыл бұрын

Hey Scott, I couldn't help but notice that you don't have any self centering hinge drill bits. They usually come in a pack of 4. You get a 2.0, 2.5, 3.5 & a 4.0mm bit allowing you to install drawer slides all the way upto installing fire doors. Next time Gaston (I think I'm spelling it right) is in town ask him to grab you a set & try them out, they've made my life as a handyman a breeze when fitting new doors & kitchen drawers. 👍