Various solutions for EGR Mjet and JTD systems. Alfa Romeo 159

Рет қаралды 5,785

11 ай бұрын

Hello guys! Modifications to the EGR system are illegal and with that can even have consequences and level of inspections and police operations. Alfa Romeo found legal ways to get around the problem by maintaining and limiting its function. In this way a work more within the law and without the need for software modifications.
These modifications are for testing and city driving purposes. Modifications in this or any other area are the responsibility of the intervener.
If you liked this or any other of my videos, please SHARE with your friends, hit the LIKE button and consider SUBSCRIBE!
--------------------------------------------------------------------------------
PayPal link to help my channel:
www.paypal.me/alfaromeonoproblem
Support the channel via MBWay: (+351)913225320
Patreon link to help my channel:
/ alfaromeonoproblem
--------------------------------------------------------------------------------
Mass air flow meter testing (MAF):
• Failing Mass Air Flow ...
Exhaust noise solution for mjet engines:
• ENGINE NOISE, Exhaust ...
DPF and EGR solutions:
• DPF or FAP, constant r...
All Videos for Alfa Romeo 164 and 166 V6 Turbo Busso 2.0L:
• Behind the scenes, Alf...
Timing belts\chains How to:
• Alfa Romeo 155 1.9td t...
Alfa Romeo owners in need of help! I try to:
• Car sold with warranty...
Alfa Romeo Experts in Potugal (so far):
• New series! Alfa Romeo...
Ac Sytems, faults, solutions ans tips:
• Stop charging the A/C ...
Cooling systems, failure and maintenance:
• Is the temperature gau...
Ligth bulbs and ilumination:
• Light fault system on,...
Everyting suspension:
• Broken alfa 75 suspens...
Clutch engagement, DMFs, master and slave cylinders:
• How to remove and re-u...
Brakes, solutions and problems:
• Big brakes!? Do you re...
Power problems and solutions:
• Mjet Injectors, how to...
DPF and FAP problems and solutions:
• DPF and FAP, do you re...
Project Alfa 75\Milano:
• Alfa Romeo 75, project...
Alfa 33 1,7 16v complete restoration:
• Alfa Romeo 33 1.7 16v ...
Tutorial videos:
• How does a starter mot...
Quick tips:
• Quick tips! Car don't ...
Electrical issues:
• How to test your fans?...
Mjet\jtd engines, hard start or no start:
• It's worse! But why? ...
Vlog videos:
• My Alfa Romeo 155 pres...
Autel Diagnosis Machine:
• How to SOLVE airbag li...
Contact me:
alfaromeonoproblem@gmail.com
Where i do my research of parts: www.eper.fiatforum.com
Where i buy OEM parts in PORTUGAL:
JRParts www.jrparts.pt/
Rua Dionísio Rodrigues 70, 2415-801 Leiria PORTUGAL
(+351)244820770 lojaonline@jrparts.pt
Where i buy all ORIGINAL parts in PORTUGAL:
LizItalia www.lizitalia-fcadealer.pt/co... (+351)244 871 520
Rua Dr, R. Virgílio Vieira da Cunha, 2401-903 Leiria PORTUGAL
Parts e-mail: vitorjoao.lizitalia@lizauto.pt
Alfista salutations!
#AlfaRomeo #alfa159 #AlfaRomeoNoProblem

Пікірлер: 44

@ignoracy 11 ай бұрын

Sir you are doing an amazing job! Thank you so much for giving away so much knowledge. Greetings from Poland

@alfaromeonoproblem 11 ай бұрын

Hello. And thank you very much for watching! I do have a lot more to come on the channel.

@tamerlanibragimov1611 8 ай бұрын

Once upon a time I brought my car to a mechanic, who told me that I have my DPF switched off in ECU.. I checked up DPF before buying a car. It had around 30% pollution and there were no plug installed. But, he knows better I thought, and admitted installing a plug. 50 km later I heard loud whistle from under the bonnet. I went back. He told me my turbo is dead. 1.5 thousands for turbo + 1 thousand for a job. I convinced him to remove a plug for free and he heard me leaving him forever with no whistle.

@One_over_the_eight 11 ай бұрын

You should block it at the exhaust manifold with a thicker diamond shaped plate and also using a thicker rectangular plate without holes, block it at the inlet manifod. The reason being there is a 90 degrees corrugated bend in the EGR aluminium pipe, just below the throttle body which can't take the back pressure and over time splits causing the car to go into limp mode and rendering the pipe useless. Seen it happen a few times using this method.

@alfaromeonoproblem 11 ай бұрын

Thank you very much. So far never seen it happen. But I will be watching. Been doing this way for 15 years and so far not one. But, we have very low corrosion here. Maybe that helps

@CostaTropicaldeGranada 9 ай бұрын

If I have the EGR deleted in the ECU with a software upgrade, do I still need to blank the EGR? I also have black smoke on hard acceleration, any ideas? Alfa Romeo 147 JTDm 8v 2006 180.000km.

@One_over_the_eight 9 ай бұрын

@@CostaTropicaldeGranada Black smoke is a sign of over fueling. Check all your vacuum and charge pipes thoroughly for splits and cracks. Even the smallest hidden split can cause this. If air is escaping after the MAF then you'll have the wrong air/fuel mixture metered by the ECU in the combustion chamber.

@alfaromeonoproblem 9 ай бұрын

@CostaTropicaldeGranada hello. Yes, is better to black it. Like I showed on a previous video on a 147. For the smoke can be the intake hose between the MAF and the turbo. Can also be an intercooler pipe

@DashCamSerbia 11 ай бұрын

10:32 Same mileage as mine. 😄

@the_steko 22 күн бұрын

so what delete gastet do i need to buy to alfa romeo 159 1,9jtdm 2006, and i also dont know what swirl flaps delete kit to buy....like how do i know what OM number does my motor has, its so frustrating, pls help

@alfaromeonoproblem 22 күн бұрын

Hello. For the 16v can be like this one. Make your own. For the swirl flaps I have several videos for that

@flowvxhp950gea 6 ай бұрын

Hello, I have a 159 1.9 16v JTDM from 2007, will there be no engine failure or does alfa have a different system.

@alfaromeonoproblem 6 ай бұрын

Fault code will be present 2005 forward

@mark737-c4x 7 ай бұрын

Hello i bought a 159 with 1.9 16 valve diesel after driving car home 100kms on freeway to my horror when i opened bonnet a big oil leak from charge pipe oil all over firewall of car changed oring and oil leak persists any ideas? Thanks.

@alfaromeonoproblem 7 ай бұрын

Hello. You may have a ruptured pipe. Follow the one that comes from the intake to the intercooler. That one usually goes bad.

@WickedLeo82 4 күн бұрын

I het the p0488 and p0490 on my 2.0 jtdm, but my egr is disabled through software, so I am puzzled what would cause these code to be brought up

@alfaromeonoproblem 2 күн бұрын

Hello. You must check with the remap guy for that, maybe is not done properly

@bhekisony7034 Ай бұрын

i have this problem with my 159 2.4 it shows this code P0403 when diagnosed with the engine light on and poor accelaration not passing 2000 rpm

@alfaromeonoproblem Ай бұрын

Hello. Use the testing gasket to make sure then

@woomdader 11 ай бұрын

How to remove yellow engin led to the controle panel ?

@alfaromeonoproblem 11 ай бұрын

About the egr blank? You have to remap (not talking about increasing power)

@pietervandermerwe7454 11 ай бұрын

I want to do that modification on my GT. Is there any downside of this mod . Some people say that it will rise the temperature to some components like turbo ect under certain driving conditions. What's your opinion?

@alfaromeonoproblem 11 ай бұрын

Hello. The down sides are the higher combustion temperatures , more NoX emissions. On the plus side, no clogging

@DashCamSerbia 11 ай бұрын

And with the down sides, you can't do anything about. But with the plus side, you can just rutinelly clean it. So I realy don't see any positive in doing this. Just emmiting more poison that people behind you need to breath in...

@emilz85 11 ай бұрын

@@alfaromeonoproblemcan that mean turbo can fail early?

@alfaromeonoproblem 11 ай бұрын

@emilz85 no, not really. But the heads can crack. But is very rare on cf3.

@dannydkasel8296 9 ай бұрын

So, if i get that correct ... EGR can be blocked @8V 115Hp 1.9 156 with a thin plate without wholes? And then, Software must be adjusted?

@alfaromeonoproblem 9 ай бұрын

Hello. On 156 8v, no software required. Only on 156 16v and all 159s

@dannydkasel8296 9 ай бұрын

@@alfaromeonoproblem ... thank you, and every ecu-tuner can do that? My second question is ... why don´t you use Multiecuscan ... it´s cheap and nearly perfect for Fiat and Alfa Romeo

@alfaromeonoproblem 9 ай бұрын

@dannydkasel8296 every tuner should be able. But all can Autel has the MES Inside, always updated. Also can be used for all makes and models and it has all factory softwares. Like MES

@DashCamSerbia 2 ай бұрын

Why do FIAT/Alfa diesel engines take a long cranking to start (like 40 seconds or so) after the EGR is removed, cleaned and put back?

@alfaromeonoproblem 2 ай бұрын

Hello. All that time, normally injectors or hi pressure fuel pump is bad. Or you mean right after doing the egr? Carbon falls in to the intake valves and they cannot close all the way. Compression is missed

@DashCamSerbia 2 ай бұрын

@@alfaromeonoproblem Yes, right after. A few people are mentioning that same problem on varoious forums. Thank you, I will tell them.

@alfaromeonoproblem 2 ай бұрын

@DashCamSerbia tell them not to mess with that. They can lock the engine with the carbon that can fall in.

@DashCamSerbia 2 ай бұрын

@@alfaromeonoproblem Though they say that they have cleaned everything and there is nothing left of carbon to fall in. But it probably falls in while removing the EGR. Not sure. Thank you again.

@alfaromeonoproblem 2 ай бұрын

@DashCamSerbia they say is one thing, what they do is another

@sup3rbosseur 11 ай бұрын

Oh yeah a other video for the 159 about the main problem on JTD : THHHE EGGGGRRR

@alfaromeonoproblem 11 ай бұрын

Many more to come! Including manifold clean, removal, swirl delete. And more

@DashCamSerbia 11 ай бұрын

Same with all diesel engines. Nobody bothers to cleam them, so when they clog up and start making problems, they just block it off and let other people deal with that problem (by breathing in more poison gasses)...

@DashCamSerbia 11 ай бұрын

@@alfaromeonoproblem I think that swirl "problems" are also caused just by lack of maintenence (lack of cleaning). So when they gunk up and seize, of course, they can break.

@alfaromeonoproblem 11 ай бұрын

@DashCamSerbia I will many more videos about that issue.

@DashCamSerbia 11 ай бұрын

@@alfaromeonoproblem 👍