Someone call the WWE they are missing a carpenter.

I don't even need a circular saw but I feel like if I don't go out and buy a Skilsaw my life might be in danger.

Ryobi's new pitch phrase "Ryobi. Better than it looks."

As an Australian I can confirm this is what we sound like on the job site 😂

He progressively gets angrier as the video goes I don’t know why.

The number one selling single use diy circular saw of all time is: The Pizza cutter.

He had me at Ryobi (9:45) I actively avoided Ryobi for the exact reasons he mentions. It looks cheap, ugly, and amateur, but I had to borrow my brother-in-law's miter saw to install some flooring and was genuinely surprised by how much I liked it...so much that I had to go out and buy my own. It's now one of the most loved tools in my shop.

The reason for two 18v batts for the Makita is that you can charge both batts at the same time in 45 mins or less, whereas those bigger "red" an "yellow" batts take almost two hrs to charge. Time is money!

Love that Vince is bringing some of the items out as your talking about them

My favorite saw will ALWAYS be the Dewalt 378G. That saw looked funky as hell - look it up. But I never used a saw that lent itself to working on the ground, one hand use ripping plywood, or cutting tops off vertical beams in the air so effortlessly. It was the perfect combination of a Skilsaw and a sidewinder. They discontinued it, I patched the cord 5 times, replaced a plug, and cracked the handle and re-stuck it on with gorilla glue. Somehow between my dad and I, it's still alive 20something years later.

This is the first time I’ve seen your channel brother, you are absolutely hilarious while being completely informative LMFAO! You literally have me cracking up every 20 seconds or so lol.

Great video! Love the enthusiasm. Next time a friend comes over to watch a funny movie, I will tell them I have something better. Then proceed to show them this hilarious video. I am not a contractor, just a woodworker, DIY kind of guy. For my needs, you can't beat the reliability and power of the corded Makita circular saws. They are built to last decades.

I gotta say I use the flexvolt worm drive style and have used quite a few on the list. Dewalt got it done here, that saw is a beast and my personal favorite. I'm with nick on that!

I’m a fan of my Milwaukee and DeWalt tools. However, my father in law uses Ryobi and I used them for the first time this weekend and they are pretty good. Nice work Nick.

Informative video! I am on a budget and looking for my first saw. I am interested in the corded Ryobi circular saw. I noticed on the Home Depot website, that they have 13 Amp, 14 Amp, & 15 Amp versions. Other than their 1 Amp differences and pricing, should I just get the cheapest one (13 Amps)? What's the noticeable difference from 13 to 14 Amps, or 14 to15 Amps? thx

Great choice for number 1. I use a skilsaw worm drive every day building fence. Had mine for years, it's taken a beating and it's still performing better than the brand new harbor freight junk that the new guys bring in. Definitely a must-have for anyone who's serious about their craft👍💯

Wow! Great job on this one. Great energy. I got into this channel because of Vince and his reviews. Entertained and educated by Nick... My gf even checked out the video.

Agreed with your list..Next ranking up the impact wrench 👍

This guy is great! Laughed through entire video while learning something!

There's a reason that many tradesmen refer to circular saws as "skillsaws". I've actually met quite a few that didn't even know they were actually called circular saws. Skilsaw has been around forever, they made them first and they made them right. Skilsaw is to the circular saw what advil is to ibuprofen.

It's the skilsaw saw that I saw not the skil saw that i thought I saw.

I do love my Metabo HPT / Hikoki C7BUR with e-brake... It's been a great tool in my DIY-shop. Not sure where it lands on the list, but I love it! :)

All my tools are Ryobi and Milwaukee 12/18 and I appreciate that you're giving the line I began with the props and kudos it deserves. Thanks brother.

Thank you for this. I'm in the market for a circular saw. My ragged out 12 amp B&D has a date with destiny--and the Grim Reaper

I am invested in the M18 Fuel line, and I love my circular saw. Built barns, houses, additions, and I've never had an issue with it. Lasts almost all day with a 12 AH battery. And believe it or not, I still use my dad's old corded Craftsman once in a while that he got back in... I think the 70's. No bells or whistles like newer saws, but it's all metal, no plastic and just... solid. It still runs like a champ.

Awesome video love the huge energy 😁😂😂 can we get a video in the future with a list of 6 1/2"/165mm circular saws?

I love the energy and the comedic commentary! I wasn't even looking at a saw until I watched this. Thanks for the video.

You are awesome! I am a Ryobi fan and I know they do better in certain areas than others when it comes to their tools but when you started with the Mr. Sister hahah I rewatched that part like 10 times. Great job!

Really enjoy watching Nick losing his mind. Even my wife was laughing 😂

The serious dedication to tool education= rapid hand movement and minimal blinking =loved this video, he kept my attention, so this gal appreciates your hard work!!! off to home depot I go lol

Dog, how have I not known about you till now. KZfaq needs recommend this to me more!

I bought a Chicago Electric circular saw once. It lasted roughly 6 cuts on 2x4s, then it let the magic smoke out.

These types of videos are honestly the best of this channel! Great video, keep making these!!

If you watch this video muted, Nick is leading the band! Jus kiddin good job great vid!

I like how vince just appears randomly lol i would have been funny if he walked by with a slice a pizza in his hand or something

The couple times the other guy was changing out the saws on the bench, was holding back his laughter 100% This guy is hilarious. It became a little much near the end but he made me subscribe to this channel. Can't wait to see more. I watched this video already knowing skilsaw was the best. Hilt is good too, but I usually see them with the powder actuated nail guns. I think the video was pretty spot on to be honest. Good job

yo i gotta give it to ya this video was epic and the zoom in on him when he is losing his mind was priceless

There's no way I'd spend 33 mins watching a crappy video. You were brilliant. I was scared to buy one of those bad boys. Now I'm gonna get a Matika! Thanks a million❤️

Why can't I stop watching even though I've already made my decision on which saw to go with?!

very informative, and very entertaining this guy is cool, keep them videos coming...

I like these kind of vids. Nick's hand movements made me think he was conducting the orchestra.

The Ridgid and tea people thing was accurate. 😂😂 all the boys at work who use Ridgid also drink a lot of sweat tea

I appreciate the whole spectrum being exercised. Anybody can test drive a bunch of Ferraris and give an opinion. I wouldn't even have the patience to test the first two classes. You guys actually worked and dealt with honest unpleasantness. Thanks fellas.

This guy is hilarious, I watched the whole thing and learnt so many hand gestures.

I love the excitement 😂. Can we get a video on different brands of saw blades? I’m a Diablo guy, but I guess not everyone feels the same.

Thx for the list! Happy Saturday 😊☀️

"Screaming at your smartwatches........." ahahahahahaha I like this guy! And he has a straight man!!

I have to say I couldn't wait and skipped to the end to see which was deemed the best circular saw on the market in Expert Class and was so happy to see we agree because I just bought the new worm drive cordless 71/4" Skil. I have been out of the carpenter trade for well over a decade and am sorry to hear some say the brand declined a bit for awhile but I never saw any other circular saw used in the Carpenters Union and I was in for nearly ten years 👍

never scene some 1 move their hands for every word they say, for 20 minutes straight. Did learn something new lol👍

That new Kobalt XTR looks mean. You guys are so lucky getting a hold of them so soon.

"when the octanes octate together" dude I'm dying 🤣🤣🤣

I've got a Milwaukee rear handle and a DeWalt 60v rear handle. The only thing I don't like about the Milwaukee is the tension is so great on the blade guard that it pulls a 1/16 to the right as you engage the cut. I've still got my old skilsaw corded, but the DeWalt is my saw of choice.

I was entertained and I’m not even a Carpenter but I am looking to buy a circular saw so this will give me some good tips. Thanks! Yes I shared it!

I think Nick needs a Gatorade after this one to replenish his energy because he was so passionate in this video

Heeey looks like mac miller didn't die after all, he just became a contractor lol. Handy Mac!

My first VCG video and hooked. Entertaining and informative. I've moved to Taiwan so need to purchase new hardware, over here is 120V and as I'm from the UK, it's 240 over there. Any reviews on jigsaws? Again, great video and well worth watching.

I got a Cordless Ryobi and it works and cuts great...The Mean Green Machine...🤙

Is this Nick's audition video for a WWE announcer, Lol, the hand flailing is incredible, he looks like an orchestra conductor of the beautiful sounds of the circular saws, show them the tool passion Nick!! Lol👍👍

Your videos are ALWAYS informative! Keep it up brother!

Just love this guy! Actually came to see circular saw reviews and now binge watching this channel!

I like makita corded circular saw working accurate and efficient. Show that next. 👍

I grew up calling any circular saw a skilsaw... so technically my dewalts and milwaukees are skilsaws

I have a circa late 1970’s (original owner) Skilsaw 77 worm drive. HEAVY but still running strong 45 years later. Just built a 20’ x 40’ deck with it. Best investment ever. Did I mention it is heavy??? 💪💪👷🏻‍♂️🏋🏻

I have all the 18v brushless metabo cordless tools and love them...hope to get the 36v stuff in near future!

That kobalt xtr saw looks slick as hell. Blue/black/yellow....Batman in a saw

From an Aussie, down here we have the 3 big brands on site. Dewalt, Milwaukee and Makita. They are the 3 main ones down here. Makita is the cheaper of the bunch so a lot of apprentices start with it. Our cheap once use brand is ozito so if you look them up you can see our 'worse' and they aren't that bad, probly same level as ryobi one

Great information man. Definitely will helps narrow down my choices.

13:18 "Say what!?" Just awesome dude.. very passionate about tools comparison.. FYI this is the first video I have seen in your channel and just subscribed too... Noice!!

I have a black&decker one and it's old and it still cuts great to this day I only used it about 5 times tho

Nick....You know DeWalt flexvolt should be ranked expert that's all i'm saying but i respect the list. Now rank MiterSaws 10 and 12. Major props on the ranking videos, good job!

You're freaking awesome man ahahaha i laughed hard throughout the video 😂😂😂

First of all, I want what he's on. Second, he needs to do every infomercial. Love it. Love the vibe he gives off watching the video.

Framer experience Yeah skill saw the best of all time I use deWalt flex volt it’s a beast and makita has an awesome balance

Skilsaw is by far the best.... like a sore peter.... hard to beat!!!

Love You Bro! Thank you for making this video. Very Informative Much Appreciated!❤️😀👍

Bought the Kobalt corded saw because of this video! I used it to build a privacy fence! Great saw, great price, thanks!

I believe that he is the illegitimate son of Ultimate Warrior...

I'm ready for y'all to test the KOBALT XTR

I just found your channel while drinking coffee with a touch of swiss miss in it. What tool do you recommend 🤔? Love the video!

Very entertaining and informative. Thx guys!

Its makita 36v then 18v milwaukee then skillsaw thats my lineup im a 20 yr vet now days all the saws are pretty good

Great catagory. @VCG Construction I will have to say the you put the makita 36 v up there and that’s. Great wish they had in 18v but I have the makita 18v 6-1/2 circ saw that that thing has been thru the ringer and is a beast

Thank you for this video, informative though timely. My power saws predate many of your low end choices. I like my Porter Cable, have been using it for years and the bearings are still true. For heavier work, 2X4s on the low end, I have a SkilSaw77 as well as an 8-1/2 SkilSaw. In my day, the low end Black&Decker was $30, the Porter was $65 or so. The worm saws today don't stand up near as well, mine are all metal. There was no Ryobi, no Kobalt, no Ridgid, they didn't exist. Ridgid did make pipe working tools, I have many. But the saws are recent, ~last 10-15 years. I hold older DeWalt radial saws in high regard, but again, the newer models are too light. I have battery tools, DeWalt, but they too are too light for real work. I guess being an old curmudgeon is going out of style. Bi11 Hudson

OMG!!!!! this guy is hilarious, I gotta say this is by far the best video I have watched in reviews about circular saws, I was laughing more ever minute that went by.

Just bought 2 Diablo blades yesterday .... made in Italy ... not Switzerland

Vince is the man love the seriousness great vid nick.

Thank you for doing this I learned.

Spot on list my man. Thanks for the cool and fun commentary.

From where I live, every circular saw is a Skill Saw. Like every recip saw is a Sawzall

Dewalt is my brand of choice and the flexvolt has performed phenomenally for me for 2 years no regrets.

Lol excellent video, loved it lol. Loved it when Vince dropped in the Hitachi battery adapter lol, he was like, don't look at him just drop it and leave before he attacks me lol. Someone call WWE Taz, he could learn some stuff lol. Great jobs guys 👍 what are skill saws other tools like ?

Oh man Im starting my carpentry workshop in Mexico and I started with an 10yo black and decker saw which sucks a lot and I'm running it with a dewalt disk that my uncle gave me hahaa. Just flexing that combination

Nick’s going crazy lmaoo

This guy is hilarious, I love every bit of it. Never believed I could watch it till the end...but I did.

Amateur saw guy here. I got a cheaper Ryobi cir. Saw from Home Depot last yr, threw box away and just discovered defective adjustment lever. Is Ryobi any good at replacements ?

Great reviews and videos...I just subscribed. I always cut my strings on my hoodies so I can still tie them when it's cold and the wind is blowing 23mph, but they won't get cought in my circular saw.hahaha it's possible

Vince is the boss but I gotta say Nick hurt my ribs I could not help but laugh at his presentation, I learned a lot.

Do a head to head with the Bosch, Makita, Dewalt, Skilsaw and Metabo CORDED Worm drive saws.

Wow Nick great vid,very funny and informative...u the man!!

Have a Skilsaw mag77 and by far it’s the best saw I’ve ever used. I absolutely love the thing