So I'm always skeptical of these KZfaq mechanic videos, but this is probably the best video for information, very well put together and in depth but not convoluted with nonsense info. Great video! Keep it up

I've been learning this stuff for 30 plus years and I fully understand what you be saying but I watched one of your videos and you said you've been in this for 10 years your knowledge is amazing for a 10 year man keep up the great videos and be very proud because I've seen guys come to work with 10 years experience and can't do half of what you do

One of the most well-rounded mechanics i know of here on KZfaq, it's just a matter of time before the diamond in the dirt is found!!!!

You are a money saver brother. Recently changed my air back clockspring and was surprised to get the vdc off and slip lights and was pretty perturbed. Appreciate the video. Since my car is a 2006 I keep a Bluetooth autel odbii scanner connected to my vehicle and was able to reset with your instructions. The autel odbii tool made me think I needed to have the car running and move it forward and hit start. That didn't work but having the key in the on position an pressing start did. Thanks a million.

Wow for firestone mechanic. Your extremely good at what you do.

Very well explained, simple fix, easy money. My boy you're killing it with the weekly videos. Keep it up Homie!!!

This is the best video I’ve found so far. Thanks for posting this video.

Man thank you ! it worked. I manage to get rid of my ABS 1143 code. I have in infinity qx50 2017 and I used the Autel MaxiSIS. I had to post this in gratitude for the work that you have done!.

Thank you 🙏 that was very helpful sense we just had an alignment done on our Infinity and now I know what they forgot to reset! Very good video 👍

Was trying to calibrate my for 30 min until I realized that the engine needed to be off after watching this vid, thanks man.

This was a very well put together video bro... I appreciate the time and effort

Excellent stuff your channel is one of the best, yet it's still under the radar. its gonna show soon you'll see homie!

Awesome video! My light came on after getting front end work and my steering is off 30 degrees. I will definitely take it in today for alignment.

GREAT VIDEO THANKS FOR YOUR TIME AND WOULD LOVE TO SEE MANY MORE VIDEOS PLEASE !

Oh yeah, that rear tire is definitely tilted. Good eye. Nice editing too Hektor. Autel for the save!

Thank you for the video holmes. I tried to reset the traction light on my Nissan truck. I did do it right the first time. It's just the clockspring I had got from the dealership wasn't the right part but has the same exact part #. The OEM clockspring was not even engaging the steering angle sensor. So it did not make any sense to reset the light in the first place!...but yes, I went thru the right steps on our shop scan tool. Like you just showed us.

Great video and very helpful thanks looking forward for more to learn from you

excellent video all very clear, and a bit fast but you can understand it, very good Thank you for your help

Really really good video. Very detailed and useful information.

Great video, fixed my issue.

Nicee 👍 liking the music at the end

Great video!

Thank you . I have same as you have there and i will fix it

Hektor Which diagnostic scanner would you recommend we have Snap on scanner in a shop but i would like to have my personal scanner?

Love your detailed video, any suggestions on code c1142 on a 2008 infiniti?

2010 Nissan Murano LE AWD: Replacing ABS actuator do I have to reset the steering angle sensor?

I heard a ticking coming from the left wheel while moving from a stop.. The ticking is now gone and I have that same code directly after. 2012 Sentra however the steering is also pointed a little to the left. Just picked up the car used so no history. Thanks for the video, I'll probably try this route before trying to find what was ticking as I have been under the car b4 and saw nothing obvious.

Jests Christ you’re a hell of a mechanic

Sup Hektor keep up the good work. 👏👍

Appreciate this video fam

Superb job!❤

my similar experiences Misalignment or incorrect tire size from wear or wrong XXX/65/20 for example i had a VDC and ABS light come on... when i mis aligned my wheels... (rear). I realigned my wheels and the ABS system no longer noticed wheel ratios turning at different speeds... relative problems could include: most likely, incorrect tires/worn tires/ incorrect wheel alignment .. .or last a level suspension indicator(little plastic arm) is broken or popped off the frame.

excellent, too bad I don't have those scanners. Nice to see EXACTLY what the sensor was sending out.

My g37 has those two lights on slip and vdc off? Car had alligment does it need to be rest I need to take it to a shop ? Has brake fluid

Another cool video like!

I have the same issue vdc light and RAS and slip light is on ...came on after I got the starter replaced. any tips on what to do?

Thanks for telling me that

You my homie, hektor

Hey man! been dealing with this issue for months my abs kicks on, on its own and literally stops me in my tracks even though I went nowhere near the breaks. super messed up. i really don't want to spend a bunch of money at the dealer because I already spent to break this in the first place and accomplish nothing more. can I reset it with a regular code scanner?

I was hoping to see the readings after the calibration. No dice. Mine started activating the slip sensor every time I turn

What can be done if it happens that whenever you switch on a car all dash signs appears and disappears but for VDC and Airbag not seen at all? ? While they should appear and dissapears as others do?

Quick question I have a 2017 Toyota Corolla took it to the Dealer they told Me The steering wheel needed to be calibrated

I had car other day issue was car was out of alignment car was hit on drivers side it had slightly bend strut we replaced strut did a alignment solved the problem so alignment can cause light to come on.

What is the name of that scanner I'm looking to purchase one

I have the same problem can you help me ?

... I have this issue with my 2010 Nissan Altima with the ABS, Slip, and VDC off lights... Is it the same for all Nissan models?

Where in California are you located? I have the exact same issue

I have SLIP light and ABS light and AWD light on after mechanics replaced front wheel hub bearing assembly. Did they do something wrong. They tried to tell me the abs line needs to be repaired. Or did they brake my stuff

Thanks, best explanation. I have the same problem the vcd off and slip permanently I try to clear dtc with scan nothing hapend the dtc Steering Angle Sensor back again how can fix ps: I HAVE change the Clock Spring Spiral Cable fx35 2007 is there adjustment for clock also?,,,

Hey Hector nice video .I want to buy a 07 M45 but it has on the VDC an slip light on so you think by giving it a wheel alignment and adjusting the steering angle sensor it should be fine. Have been checking the internet you have the best video I've seen so far

I have been having issues with the VDC/SLIP light come on while driving and it cut power completely. I try almost everything. Can you advise.

Mine did the same thing but mine would come on when I go down the road a little an it turnt out to be the alignment than once I got the alignment it didn’t come back on the lights stayed off

So i just had this problem just today when the shop changed the Clockspring on my truck. I bought it in Ebay aftermarket i believe.....not OEM. So what its doing now after it was installed is when i drove away from the shop it started having the VDC problem like a pulsating/grinding effect. Brought it back to the shop and they inspected. They found out that the Steering Angle Sensor was not functioning..........the scanner showed it zero degrees on straight and when turning the steering wheel left and right it still stays at zero degrees. Do you think the Clockspring is bad or not compatible with the OEM Steering Angle Sensor thats why its not reading it? Or the Clockspring connected to the Steering Angle Sensor need to be calibrated or do a relearn?? Does it need alignment and they need to reset the Steering Angle Sensor?? Please help.

Please share the exact model of this Autel device.

Great video! I got my traction control light on, on my g37.I recently took it to a shop to install a new steering wheel and the clock spring was damaged. They replaced my clock spring but the VDC light is still on. I think this will take care of the issue but my horn and volume controls, cruise control are not working also. Any tips to fix this?

Did the back wheel correct itself? I have this exact problem with my 2010 QX56.

My steering wheel is straight, I just did the alignment and she drives straight as an arrow and I just reset the sensor and it reads 0.0 so the reset worked but the lights are still on.

I have this issue, is it bad driving like that while i have a chance to take it to the shop? Note: i installed lowering spring and havent done an alignment just yet, will that be the problem? Thanks.

why my 2006 Infiniti qx56 alarm goes off at night every hour. won't stop unless I start the truck

Would I need this if I replaced my steering angle sensor?

G35 with Both lights on and acceleration in Limp mode because of it. This my problem?

Vdc and slip light is on my 2010 Altima I did wheel alignment still on?? 😔 What else should check for brake pads? ?Rotor??

I have a 2005 FX35 and my light VDC and Slip came on as I pulled out the garage. The engine runs but car doesn’t have power in forward or reverse. Also the service engine soon light came on.

yu da man paana,have same problem 04 fx35 kicking my ass,replaced clock spring and angle sensor ,same p,now ill get an alignment and reset and see,thnkyu,wish me luck

Hector Help!!!! amateur was working on my truck. Would that work on Nissan Frontier 2012, he did something and now the front brake locks when I try to turn what should I do ????

Can this cause p0335 code (crank sensor) and slip light vdc on?

I have code c1143 Nissan altima 2010 2.5L Symptoms: steering wheel is not aligned, way off... I turn on the car, lights stay on for 4 seconds, they turn off and when I drive away. 8 seconds later the VDC and slip light pops out and I loose power. I don't completely loose power but I feel the lag. What I've done: I did replace the drivers side tie rod end. (My suspicions is that it got misaligned and now the VDC and slip light is on) How I tried to fix the issue by doing research: topped brake fluid, checked brake pads, replace both speed sensors, checked fuses, checked pedals sensor (both) check for bad connections and bad wire. Problem persist. My question: If I don't have a scanner can I just do an alignment and replace the angle sensor? If so would the light on the VDC and slip will stay on if I don't reset the VDC

Check all the connections under the hood

I got the same scanner I prefer it to snap on

How do I do this without paying someone ?

Tell my how much you charge!?

where are u located?!?!?!?!?!?!!??!?!!!?!

Mi Nissan Frontier tiene asi el volante ahorita... después de que di un golpe la curva de la calle..

Awesome stuff bitch! Glad you put this video out...bitch!!!!