Vehicle for Special Tasks - Hydraulic Bucket BuilD

Рет қаралды 534,529

2 ай бұрын

Skid Steer Tracks Build - • Making Skid Steer Tracks
Bestarc Plasma Cutter - amzn.to/3x5faNv
Mag Drill - s.vevor.com/bfQToS
So welcome to the next part of building a homemade mini skid steer.
This time we made a multi-purpose bucket that will be very helpful in this construction.
The whole thing weighs about 100 kg. The bucket's pressure is approximately 500 kg.
Hydraulic cylinders have a travel height of 100 mm.
The blades have dimensions of 110mm x 12mm.
The width of the bucket is approximately 100 cm.
• Making Hydraulic Power... - Making Hydraulic Power Unit
• Cutting Steel easier t... - Cutting Steel easier than you think - Use Wiper Motor
• Making revers trike to... - Making Revers Trike to have fun
• Making Hybrid Stump Gr... - Hybrid Stump Grinder

Пікірлер: 179

@MadeinPolandChannel 2 ай бұрын

Skid Steer Tracks Build - kzfaq.info/get/bejne/lbVikrpesMe0mYk.html Some tools we use :) Impact wrench - s.click.aliexpress.com/e/_Dmm4Hzr Bestarc Plasma Cutter - amzn.to/3x5faNv Mag Drill - s.vevor.com/bfQToS www.amazon.com/shop/madeinpoland

@shreepal8998 27 күн бұрын

@mlmfathhulla 18 күн бұрын

Pcd57

@quocthaiak 2 ай бұрын

No commentary, no background music Just pure skill and hard work That's all I need.

@ToolTimeToday 2 ай бұрын

Can't wait to see the final build on this project. The quality in your builds is outstanding !! Great job :)

@paulhorror939 2 ай бұрын

Bardzo dobra robota. Czekam z niecierpliwością na kolejne etapy w projekcie 😊

@user-lx3nz4nx8s 2 ай бұрын

Марсоход? Без проблем. Луноход? Ещё проще. Нет таких слов выразить восхищение его мастерством. Всего самого наилучшего мастеру.

@glenpaul3606 2 ай бұрын

Half Polish half Ukrainian here. Enjoy seeing this work being done. Reminds me of my father. Looking forward to seeing it working.

@7891ph 2 ай бұрын

I know the price of steel isn't getting any cheaper, but for a bucket of that size, your cross sectional thicknesses are very light. Without an actual reference, I'm guessing most of the body is made of 5~7mm. The reinforcements are good design wise, just not heavy enough. The biggest redemption is the Hardox sections; treated with respect, they'll outlive the rest of the machine, and maybe a lot of us.

@brianpaige4884 2 ай бұрын

Clearly one of the best steel fabricators on KZfaq.... well done Sir

@jbproduction8703 2 ай бұрын

great work! proud of my Polish brothers who are doing remarkable work! I can't wait to see what happens next ✌️✌️

@andreytsvetkov7339 2 ай бұрын

it looks reliable and high quality, I'm impressed 👍

@KelleyStrzelczyk 10 күн бұрын

When I watch videos like this I think of how I could have been an electric toothbrush repairman. If only .

@kukeskukukesku7357 2 ай бұрын

Super się to ogląda,jakby to było takie łatwe❤

@kexx99 2 ай бұрын

Я не видел ни чего подобного ни где. Только здесь возможны такие технологии. Браво, Браво!!

@great473 2 ай бұрын

Великолепно получилось

@Yellow_Hammer 2 ай бұрын

Our favorite Polish guy just out here being the Master KZfaq Fabricator.

@madeingarage7040 2 ай бұрын

Chylę czoła i czekam na efekt końcowy👏✊️✊️

@rockcrusher4636 2 ай бұрын

Excellent, as always, thanks for sharing. Cheers.

@Wolanajak Ай бұрын

Kanał lepszy niż te frizy i inne czjniki❤

@jana171 2 ай бұрын

Another great build, I'm so impressed !

@MadeinPolandChannel 2 ай бұрын

Thanks!

@Akusenn1 2 ай бұрын

Idealnie! Coś na noc ❤

@claudio6164 2 ай бұрын

Man, you are a genius, congratulations on the work, it was incredible.

@laszlolivelife2753 2 ай бұрын

looks like a beast love it can't wait to see the rest of it

@josecerqueiracolinas2115 2 ай бұрын

⭐⭐⭐⭐⭐ from Portugal ,for you(Made in Poland).

@user-pf7om3vq8u 2 ай бұрын

Отличная работа 👍

@francesco_maggio 2 ай бұрын

UAOOOO 🤩! DARUZ sei sempre un GENIO. Adoro i tuoi video

@Bandar_Alai_Heavy_Equepment 2 ай бұрын

Making 4 in 1 Bucket for Skid Steer Loader...very useful and inspiring...always success..Greetings from your friends Bandar Alay Heavy Equipment 🇲🇨🌼❤✋👍

@Damian-po6go 2 ай бұрын

Trochę brakuje sztywności w tej łyżce. Widać to przy testach siłowników. Może warto dospawac na bokach jakieś wzmocnienia. Powodzenia, świetny projekt

@JanKowalski-op6rf 2 ай бұрын

Dokładnie, warto wzmocnić bo będzie później problem.

@MadeinPolandChannel 2 ай бұрын

Wzmocnienia zawsze można wspawac, ale to wyjdzie przy testach praktycznych 😉

@Damian-po6go 2 ай бұрын

@@MadeinPolandChannel No na tym etapie to nawet wskazane, żeby nie dokładać kilogramów jak trzeba co jakiś czas przenosić wszystko w rękach.

@JanKowalski-op6rf 2 ай бұрын

@@MadeinPolandChannel Jak najbardziej. Miniaturka wyszła ciekawa. Łyżkę można by w kompie zmienić na kolor by przykuwała oko. Wyświetleń bedzie więcej.

@DanKoning777 2 ай бұрын

I've been a subscriber for many years-and it's great seeing you challenge yourself more/more as your skills increase and you become more creative. Looking forward to the next installment. Well done as always and a 👍 God bless.

@alfredoberlanga3524 2 ай бұрын

Realmente tremendo tu ingenio . Mis felicitaciones 👏

@vinceianni4026 2 ай бұрын

Good job mister beautiful project well done

@ohhpaul7364 2 ай бұрын

Add a gusset to the bottom, moving edge of the jaw, make like a triangle shaped box out of the entire jaw. That will keep the bottom jaw from bending forces when you are trying to pick things up and back dragging with the jaw open. I have seen many buckets fail into a U shape that did not have that reinforcement. I would use a 25mm x 50mm tube laid flat on the bottom about 1/3 of the way from the back of the jaw, then lay plate down over that to the cutting edges on both sides.

@dariuszwereszczynski8061 2 ай бұрын

Nie ma o czym mówić - fach w ręku 👍🏻 Robota robi się sama 💪 Super sprawa

@harkbelial 2 ай бұрын

Side plates should be thicker, other than that great design💪💪💪

@wolfpreist 2 ай бұрын

Good, you're going Skidd Steer Quicktatch on the bucket attachment. That's gonna save you headaches when you're switching implements.

@tjkoker 2 ай бұрын

Helluva pinch point. OSHA would have a field day with this one! Haha. Great video. Cheers.

@NathanNostaw 2 ай бұрын

Very nice job. What a handy bucket. I may have missed it, but it looks like you only have hardox on one of the jaw edges. Scraping with the front inside edge is very handy and will need hardox and it's good for long term wear from grabbing rocks and concrete.

@conceptgaraz828 2 ай бұрын

Łyżka fajnie zrobiona z pomysłem wzmocnij boki płaskownikiem 5mm wraz z uchwytami uszy otwierqnia powinny być z blachy co najmniej 10 mm . O za tym reszta świetnie zrobiona

@Bunk599 2 ай бұрын

Quite the clever project I am always impressed by your designs. I must admit to thinking those cylinder pin attachments look a bit weak to my eye. I am a retired professional engineer. The highly stressed sharp corners and welds are prone to fatigue cracking due to the resulting stress concentrations. I guess you will know soon enough if it is adequate once you get it up and running. Looking forward to next video.

@tunintunin3417 2 ай бұрын

You are a magician.

@The-Warm-voice1359 2 ай бұрын

You pretty Good 👍

@villekinnunen6357 2 ай бұрын

Awesome job man! greetings from finland!

@TenmaFN 12 күн бұрын

very cool

@pawelaco 2 ай бұрын

No będzie super maszyna, masę pracy masz. Pozdrowionka

@MadeinPolandChannel 2 ай бұрын

Również pozdrawiamy 😉

@09FLTRMM77 2 ай бұрын

MM77 Approved 👍🏼👍🏼

@PALECification 2 ай бұрын

Za jakiś czas pewnie powstanie home made excavator 👌👍👍.

@MCsCreations 2 ай бұрын

Fantastic work, dude! Really well done!!! 😃 Stay safe there with your family! 🖖😊

@MAXIMORUBERT100 2 ай бұрын

Well done,keep improving💪😎👍

@shafer9401 2 ай бұрын

Proponuję dołożyć boczne lemiesze i wzmocnienie wzdłużne w dolnym poszyciu żeby łyżka nie klinowała się w urobku 😃

@XerfThingol 2 ай бұрын

Elegancka robota. Nie do końca wiem po co w czołgu ładowarka (po poprzednim filmiku było wiadome, że budujesz czołg, ta ładowarka to tylko do algorytmów jutuba, wszyscy to wiemy), czekam na następne etapy projektu.

@SzymekCRX 2 ай бұрын

Mmmm SketchUp 2016 :)

@adelinopietropoli4978 2 ай бұрын

Hi , congratulations, great job is coming really well 👏🔝👍

@user-km7yu1wf7d 2 ай бұрын

I want you to invent a hydraulic excavator❤

@jacekejsmont 2 ай бұрын

Ale jesteś gość. Pozdrawiam z Podlasia

@MadeinPolandChannel 2 ай бұрын

Pozdrawiamy z Podkarpacia 😁

@mchaciej 2 ай бұрын

@@MadeinPolandChannel Fajnie wiedzieć że mamy tak świetny kanał z podkarpacia Pozdrawiam ze Stalowej Woli

@marjukii-ze5vw 2 ай бұрын

Free Indonesia 🇾🇪 mantap 👍👍👍 .....

@lithiumike 2 ай бұрын

This is nice!

@markchisholm2657 2 ай бұрын

Good stuff as ever. However, given that the bucket is not super heavyweight but clearly has some beefy rams it's normally good practice to use a flow divider to split the hydraulic oil evenly to each ram. Over time one ram will be easier to operate than another and then you end up with a torque effect on the pins and support structures.

@thejerronimo 2 ай бұрын

Good Job as always

@AW-Services Ай бұрын

Really enjoy this channel and its builds. No irritating music and good old fabrication and engineering. With your bucket serrated side edges will you be reinforcing them, heat treating or hard facing them? They will wear quickly when lifting logs or clearing rubbish

@sebastiaosoares9275 2 ай бұрын

Big job.

@Bangsoljirak Ай бұрын

Amazing

@nathkrupa3463 2 ай бұрын

Great work sir you are awesome ❤️ 😊😊❤

@davidhauge5706 2 ай бұрын

Like what you do. You might try turning the tracks around Pointing back the traction is spread. I hope you understand what I am trying to say.

@Plumbing116 2 ай бұрын

🔥🔥🔥🔥🔥 good job 👍

@ArcoElettrico 2 ай бұрын

Wow❤❤❤❤❤❤

@CLangbakk 2 ай бұрын

amazing work man! perhaps reinforce the sides with another layer? looked like it was bending a bit :)

@SekAustria Ай бұрын

What a build bro!!!

@MadeinPolandChannel Ай бұрын

Thanks buddy! 😉

@amarkhan6426 Ай бұрын

❤Nice

@animalsfriends1 2 ай бұрын

very interesting

@hotfacts786 2 ай бұрын

WoW What a Video Hermosa Linda ❤❤❤

@blasidomenico 2 ай бұрын

Good morning and congratulations on the project . Could I please know from which website you buy the Oleodynamic material? Thank you and good work.

@karoljezak9483 2 ай бұрын

Super robota. Przydałaby Ci się wycinarka plazmowa CNC :)

@patheron7812 2 ай бұрын

Very nice! Why did you not build the frame first?

@GiorgioCoccolini 9 сағат бұрын

Why don't you add a matching pair of teeth on the bucket side? In this way, it can grab something and hold it for lifting or can really cut.

@dariogonzalez6249 2 ай бұрын

Nice plasma i bought an Arc Captain that seems to be on reverse polarity.

@TerryCassar Ай бұрын

Having hydraulic lines on top of the bucket is the biggest fail, that’s exactly where rocks end up when they roll over!

@sj_kim 2 ай бұрын

와우~^^

@tomaszpatykowski4615 2 ай бұрын

Czy te przekładnie użyte do przeniesienia napędu dźwignią temat🤔 bo projekt idzie w masę? Robota profesjonalna👍

@jonathanaraujo399 2 ай бұрын

Genial

@garymcbrien2853 2 ай бұрын

Very light weight for a skid steer

@CarRestoration91 2 ай бұрын

GREAT IDEAS 🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰

@MadeinPolandChannel 2 ай бұрын

Thanks 😉

@donaldmatthies6026 2 ай бұрын

Damn bro, you have been busy since the last video. This is turning out really nice. Do the sides of the bucket need to be strengthen? Thank you for taking time to build, film, edit and post this video.

@coutinho640 2 ай бұрын

Top 🎉

@tomasz7847 2 ай бұрын

Moim skromnym zdaniem scianki w których zamocowany jest siłownik krokodyla są zdecydowanie za cienkie ale może przez zmniejszony gabaryt całości będą wystarczające jednakże najlepiej to jeździć obserwować

@jaissomdelimadelima9039 2 ай бұрын

❤❤

@user-rs6ij7zk3w 2 ай бұрын

Зубы врятли пригодятся , а вот отверстия под кромку нужно было делать

@MitzvosGolem1 2 ай бұрын

Those drive motors will not last long. Otherwise excellent channel Thank you 👍

@tedbastwock3810 2 ай бұрын

norseman bits? cant imagine what else went through that and survived.

@ivanivanov1875 2 ай бұрын

У знакомых заболел хомяк - лежит не встаёт, голову поднимает и роняет, не ест ничего. Оказалось, весь день прятал за щекой здоровенную гайку - вещь-то хорошая. Но, падла, тяжеловата для хомяка. ))

@user-dd1us9ze3f Ай бұрын

Жёсткости нет... Сделано хорошо, спору нет. Но с 2йки ковш... Маловато

@hossup319 2 ай бұрын

👍

@user-gl5rf8he4g 2 ай бұрын

👍👍🚜

@nera3912 2 ай бұрын

I really like your channel, I watched all the episodes, and some I watched twice, very interesting. You do very cool things 👍🔥

@user-jw7qf5qj9w 2 ай бұрын

3:07 , а глаза запасные есть? В аптеке продают? Очки защитные просто необходимы!!!

@ElectroTree01 2 ай бұрын

Impressive! What are the specs of your hydraulic system and engine?

@MadeinPolandChannel 2 ай бұрын

Kawasaki V petrol engine 21 hp. The hydraulic system is partially designed, but I will probably have to test different hydraulic pumps.

@ElectroTree01 2 ай бұрын

@@MadeinPolandChannel Ok. I've thought about making a mini skidsteer and similar things for some time and your design(at least so far) has some of the ideas that I've had. Is this going to be a walk behind or ride on unit?